Lines Matching +full:25 +full:gbase +full:- +full:kr
3 * Copyright (c) 2007-2013 Broadcom Corporation
125 /* Up to 16 bytes of NULL-terminated string */
145 (if multiple found, priority order is: NC-SI, UMP, IPMI) */
150 /* Use SPIO4 as an arbiter between: 0-NC_SI, 1-IPMI
151 (can only be used when an add-in board, not BMC, pulls-down SPIO4) */
153 /* Use SPIO4 as an arbiter between: 0-UMP, 1-IPMI
154 (can only be used when an add-in board, not BMC, pulls-down SPIO4) */
156 /* Use SPIO4 as an arbiter between: 0-NC-SI, 1-UMP
157 (can only be used when an add-in board, not BMC, pulls-down SPIO4) */
409 /* Default values: 2P-64, 4P-32 */
498 * The input pin I_FAULT which indicate over-current has occurred.
526 /* Set non-default values for TXFIR in SFP mode. */
530 /* Set non-default values for IPREDRIVER in SFP mode. */
534 /* Set non-default values for POST2 in SFP mode. */
574 /* Enable RJ45 magjack pair swapping on 10GBase-T PHY (0=default),
609 /* When KR link is required to be set to force which is not
610 KR-compliant, this parameter determine what is the trigger for it.
613 forced speed in with another parameter. Note when force-1G is
640 /* Enable BAM on KR */
1175 * pulse to determine when to switch to an OS-absent mode. */
1181 * running and there won't be any firmware-driver synchronization during a
1192 * Driver <-> FW Mailbox *
1421 * (year-2001)*12*32 + month*32 + day.
1426 * OS-absent when it is not getting driver pulse.
1493 * Multi-Function configuration *
1536 /* 0 - low priority, 3 - high priority */
1542 /* value range - 0..100, increments in 100Mbps */
1562 /* afex default VLAN ID - 12 bits */
1624 * Extended configuration per function - this array does not exist and
1714 * array with individual bit-filed elements accessed using shifts and masks.
1719 #define SHMEM_ARRAY_MASK(eb) ((1<<(eb))-1)
1722 /* the bit-position macro allows the used to flip the order of the arrays
1747 ((((32/(fb)) - 1 - ((i)/((fb)/(eb))) % (32/(fb))) * (fb)) + \
1787 * For Admin MIB - is this feature supported by the
1788 * driver | For Local MIB - should this feature be enabled.
1931 /* ADMIN MIB - DCBX local machine default configuration. */
1952 /* REMOTE MIB - remote machine DCBX configuration. */
1971 /* LOCAL MIB - operational DCBX configuration - transmitted on Tx LLDPDU. */
2182 * bits 0-2 - function number / instance of driver to perform request
2183 * bits 3-5 - op code / is_ack?
2184 * bits 6-63 - data
2269 /* the status of EEE auto-negotiation
2270 * bits 15:0 the configured tx-lpi entry timer value. Depends on bit 31.
2318 u32 link_change_count[PORT_MAX]; /* Offset 0x160-0x164 */
2346 /* For PCP values 0-3 use the map lower */
2347 /* 0xFF000000 - PCP 0, 0x00FF0000 - PCP 1,
2348 * 0x0000FF00 - PCP 2, 0x000000FF PCP 3
2352 /* For PCP values 4-7 use the map upper */
2353 /* 0xFF000000 - PCP 4, 0x00FF0000 - PCP 5,
2354 * 0x0000FF00 - PCP 6, 0x000000FF PCP 7
2368 * MM - Major, mm - Minor, bb - Build ,dd - Drop
3232 * 5 lines. slow-path status block
3297 #define IGU_BACKWARD_COMPATIBLE_ENABLE_INT (0x3<<25)
3298 #define IGU_BACKWARD_COMPATIBLE_ENABLE_INT_SHIFT 25
3318 #define IGU_REGULAR_ENABLE_INT (0x3<<25)
3319 #define IGU_REGULAR_ENABLE_INT_SHIFT 25
3446 * Parsing flags for over-ethernet protocol
3458 * Parsing flags for over-IP protocol
3842 * Command for adding/removing a Inner-MAC/VNI classification rule
3868 * Command for adding/removing a MAC-VLAN pair classification rule
4283 * Eth Rx Cqe structure- general structure for ramrods
4721 * Set-MAC command type (in E1x)
4763 * approximate-match multicast filtering for E1H per function in Tstorm
4920 * per-port SAFC demo variables
4939 * per-port rate shaping variables
4947 * per-port fairness variables
4957 * per-port SAFC variables
4974 * Per-port congestion management variables
4998 * per-vnic rate shaping variables
5005 * per-vnic fairness variables
5044 * Protocol-common command ID for slow path elements
5062 * Per-protocol connection types
5097 * zone A per-queue data
5106 * Vf-PF channel data in cstorm ram (non-triggered zone)
5114 * zone for VF non-triggered data
5121 * Vf-PF channel trigger zone in cstorm ram
5128 * zone that triggers the in-bound interrupt
5138 * zone B per-VF data
5225 * pf-vf event data
5489 * Dynamic Host-Coalescing - Driver(host) counters
5527 * HC state-machine
5545 * hold PCI identification variables- used in various places in firmware
5562 * The fast-path status block meta-data, common to all chips
5594 * The fast-path status block meta-data
5614 * The fast-path status block meta-data
5623 * The fast-path status block meta-data
5681 * Multi-function modes
5692 * Protocol-common statistics collected by the Tstorm (per pf)
5707 * Protocol-common statistics collected by the Tstorm (per port)
5727 * Protocol-common statistics collected by the Tstorm (per client)
5745 * Protocol-common statistics collected by the Ustorm (per client)
5761 * Protocol-common statistics collected by the Xstorm (per client)
5843 * Protocol-common statistics counter
5941 * zone A per-queue data
5949 * zone B per-VF data
5962 /* Drift-Adjust Commands for Set Timesync Ramrod */
5978 /* zone A per-queue data */
5986 * zone B per-VF data
5994 * data per VF-PF channel
6011 * State of VF-PF channel
6033 * zone A per-queue data
6041 * zone B per-VF data