Lines Matching full:sdio
6 comment "MMC/SD/SDIO Host Controller Drivers"
243 tristate "SDHCI support for the Cadence SD/SDIO/eMMC controller"
247 This selects the Cadence SD/SDIO/eMMC driver.
397 Needed by some Fujitsu SoC for MMC / SD / SDIO support.
408 Needed by Milbeaut SoC for MMC / SD / SDIO support.
435 MMC 5.1 compliant and supports SD, eMMC and SDIO interfaces.
447 The controller supports the SD/SDIO Spec 3.x and eMMC Spec 4.5x
554 SD/MMC/SDIO devices.
596 tristate "Marvell MMC/SD/SDIO host driver"
600 This selects the Marvell SDIO host driver.
601 SDIO may currently be found on the Kirkwood 88F6281 and 88F6192
616 tristate "MMC/SD/SDIO over SPI"
621 Some systems access MMC/SD/SDIO cards using a SPI controller
622 instead of using a "native" MMC/SD/SDIO controller. This has a
624 advantage of working on many systems without dedicated MMC/SD/SDIO
642 bool "Hardware support for SDIO IRQ"
645 Enable the hardware support for SDIO interrupts instead of using
683 tristate "Spreadtrum SDIO host Controller"
689 This selects the SDIO Host Controller in Spreadtrum
708 tristate "Renesas SDHI SD/SDIO controller support"
713 This provides support for the SDHI SD/SDIO controller found in
717 tristate "DMA for SDHI SD/SDIO controllers using SYS-DMAC"
721 This provides DMA support for SDHI SD/SDIO controllers
726 tristate "DMA for SDHI SD/SDIO controllers using on-chip bus mastering"
731 This provides DMA support for SDHI SD/SDIO controllers
888 tristate "VUB300 USB to SDIO/SD/MMC Host Controller support"
893 The VUB300 is a USB-SDIO Host Controller Interface chip
894 that enables the host computer to use SDIO/SD/MMC cards
898 USB to SDIO/SD/MMC adapters and embedded on some motherboards.
901 to single and multifunction SDIO cards.
903 Some SDIO cards will need a firmware file to be loaded and
926 CSR boards with this device include: USB<>SDIO (M1985v2),
929 Note: These controllers only support SDIO cards and do not
944 tristate "Renesas USDHI6ROL0 SD/SDIO Host Controller support"
947 This selects support for the Renesas USDHI6ROL0 SD/SDIO
1021 This is needed if support for any SD/SDIO/MMC devices is required.
1036 tristate "Broadcom SDIO/SD/MMC support"
1042 This selects support for the SDIO/SD/MMC Host Controller on
1048 tristate "Marvell Xenon eMMC/SD/SDIO SDHCI driver"
1051 This selects Marvell Xenon eMMC/SD/SDIO SDHCI.
1064 SD/MMC/SDIO devices.
1078 SD/MMC/SDIO devices.