Lines Matching +full:core +full:- +full:module
1 # SPDX-License-Identifier: GPL-2.0-only
15 tristate "AMD CS5535 and CS5536 southbridge core functions"
19 This is the core driver for CS5535/CS5536 MFD functions. This is
44 tristate "Active-semi ACT8945A"
49 Support for the ACT8945A PMIC from Active-semi. This device
50 features three step-down DC/DC converters and four low-dropout
66 sun4i-gpadc-iio and the hwmon driver iio_hwmon.
68 To compile this driver as a module, choose M here: the module will be
69 called sun4i-gpadc.
88 tablets etc. It has 4 DC/DC step-down regulators, 3 DC/DC step-down
93 bool "Analog Devices ADP5520/01 MFD PMIC Core Support"
98 the I2C driver and the core APIs _only_, you have to select
119 over at91-usart-serial driver and usart-spi-driver. Only one function
135 tristate "Atmel HLCDC (High-end LCD Controller)"
168 This driver can also be built as a module. If so, the module
172 tristate "X-Powers AC100"
176 If you say Y here you get support for the X-Powers AC100 audio codec
178 This driver include only the core APIs. You have to select individual
187 tristate "X-Powers AXP series PMICs with I2C"
192 If you say Y here you get support for the X-Powers AXP series power
194 This driver include only the core APIs. You have to select individual
199 (builtin) and not a module, as the OpRegion must be available as
204 tristate "X-Powers AXP series PMICs with RSB"
208 If you say Y here you get support for the X-Powers AXP series power
210 This driver include only the core APIs. You have to select individual
221 sub-devices. This driver will instantiate additional drivers such
224 To compile this driver as a module, choose M here: the module will be
225 called cros-ec-dev.
245 core functionality controlled via I2C.
254 core functionality controlled via SPI.
306 usually found on PXA processors-based platforms. This includes
307 the I2C driver and the core APIs _only_, you have to select
309 LEDs and battery-charger under the corresponding menus.
352 This driver can be built as a module. If built as a module it will be
364 This includes the I2C driver and core APIs.
376 This includes the I2C driver and core APIs.
381 tristate "Dialog Semiconductor DA9150 Charger Fuel-Gauge chip"
387 This adds support for the DA9150 integrated charger and fuel-gauge
397 This adds support for Diolan USB-I2C/SPI/GPIO Master Adapter
398 DLN-2. Additional drivers such as I2C_DLN2, GPIO_DLN2,
408 This adds support for the power-off functionality and access to
431 such as push-button monitor, multiple ADC's for voltage and
481 Analog-to-Digital Converter (LRADC) found on the i.MX23 and i.MX28
485 mxs-lradc-adc for ADC readings
486 mxs-lradc-ts for touchscreen support
488 This driver can also be built as a module. If so, the module will be
489 called mxs-lradc.
506 Add support for HiSilicon Hi6421 PMIC. Hi6421 includes multi-
508 This driver includes core APIs _only_. You have to select
511 We communicate with the Hi6421 via memory-mapped I/O.
521 multi-functions, such as regulators, RTC, codec, Coulomb counter,
524 This driver includes core APIs _only_. You have to select
543 This core driver provides register access for the LED/DS1WM
546 handled by the leds-pasic3 and ds1wm drivers.
555 interface to one or more sub-chips.
567 The GPIO exports a total amount of 8 interrupt-capable GPIOs.
603 causes the designware-i2c driver to be builtin for the same reason.
630 causes the designware-i2c driver to be builtin for the same reason.
667 I2C, SPI and HS-UART starting from Intel Sunrisepoint (Intel Skylake
676 I2C, SPI and HS-UART starting from Intel Sunrisepoint (Intel Skylake
689 multi-function device that exposes IPC, General Control
690 Register and P-unit access. In addition this creates devices
714 tristate "Azoteq IQS620A/621/622/624/625 core support"
719 Say Y here if you want to build core support for the Azoteq IQS620A,
720 IQS621, IQS622, IQS624 and IQS625 multi-function sensors. Additional
721 options must be selected to enable device-specific functions.
723 To compile this driver as a module, choose M here: the module will
727 tristate "Janz CMOD-IO PCI MODULbus Carrier Board"
731 This is the core driver for the Janz CMOD-IO PCI MODULbus
737 tristate "Kontron module PLD device"
740 This is the core driver for the PLD (Programmable Logic Device) found
745 This driver can also be built as a module. If so, the module
746 will be called kempld-core.
756 This includes the I2C driver and the core APIs _only_, you have to
758 battery-charger under the corresponding menus.
768 the I2C driver and the core APIs _only_, you have to select individual
779 This includes the I2C driver and the core APIs _only_, you have to
781 battery-charger under the corresponding menus.
792 MAX77836 Micro-USB ICs with battery charger.
821 MAX77651 Power Management ICs. This is the core multifunction
822 driver for interacting with the device. The module name is
927 PMIC part includes 2-channel BUCKs and 2-channel LDOs
928 LDO part includes 4-channel LDOs
947 The device supports multiple sub-devices like LED, HWMON and WDT.
952 This driver can also be built as a module. If so the module
996 certain e-book readers designed by the original design manufacturer
1000 tristate "Nokia Retu and Tahvo multi-function device"
1005 Retu and Tahvo are a multi-function devices found on Nokia
1014 This core driver provides register access and IRQ handling
1016 so that function-specific drivers can bind to them.
1033 tristate "Philips UCB1400 Core driver"
1037 This enables support for the Philips UCB1400 core functions.
1040 To compile this driver as a module, choose M here: the
1041 module will be called ucb1400_core.
1051 built-in PM8xxx PMIC chips.
1057 module. This will build a module called "pm8xxx-core".
1071 module. This will build a module called "qcom_rpm".
1086 series as a module. The module will be called "qcom-spmi-pmic".
1089 tristate "RDC R-321x southbridge"
1093 Say yes here if you want to have support for the RDC R-321x SoC
1115 which includes the I2C driver and the Core APIs. This driver provides
1117 sub-devices like charger, fuel gauge, flash LED, current source,
1129 through i2c interface. The device supports multiple sub-devices
1144 through I2C interface. The device supports multiple sub-devices
1175 To compile this driver as a module, choose M here: the
1176 module will be called sec-core.
1177 Have in mind that important core drivers (like regulators) depend
1178 on this driver so building this as a module might require proper
1187 This is the core driver for the SI476x series of AM/FM
1188 radio. This MFD driver connects the radio-si476x V4L2 module
1191 To compile this driver as a module, choose M here: the
1192 module will be called si476x-core.
1200 to be shared by all sub-devices.
1203 sub-devices represented by child nodes in Device Tree will be
1216 * SMARC-sAL28
1222 This is the core driver for the Silicon Motion SM501 multimedia
1243 This is the core driver for the Skyworks SKY81452 backlight and
1246 This driver can also be built as a module. If so, the module
1266 bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions"
1271 chips. This core driver expose register access functions.
1274 actual register access is done by the IC core driver.
1277 bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
1298 bool "ST-Ericsson DB8500 Power Reset Control Management Unit"
1328 GPIO: stmpe-gpio
1329 Keypad: stmpe-keypad
1330 Touchscreen: stmpe-ts
1331 ADC: stmpe-adc
1384 To compile this driver as a module, choose M here: the
1385 module will be called ti_am335x_tscadc.
1428 bool "TI OMAP USBHS core and TLL driver"
1433 This is the core driver for the OAMP EHCI and OHCI drivers.
1456 high-power "white LED driver". This boost converter is
1470 This driver can also be built as a module. If so, the module
1482 This driver can also be built as a module. If so, the module
1528 This driver can also be built as a module. If so, the module
1542 This driver can also be built as a module. If so, the module
1556 This driver can also be built as a module. If so, the module
1571 This driver can also be built as a module. If so, the module
1586 This driver can also be built as a module. If so, the module
1635 step-down converters, 11 general purpose LDOs, USB OTG Module,
1646 This core driver provides register access and IRQ handling
1648 so that function-specific drivers can bind to them.
1650 These multi-function chips are found on many OMAP2 and OMAP3
1664 This driver uses board-specific data to initialize the resources
1694 regulators, Dual slot memory card transceivers, real-time clock
1704 This is the core driver for the TI WL1273 FM radio. This MFD
1705 driver connects the radio-wl1273 V4L2 module and the wl1273
1719 backlight or ambient-light-sensor functionality of the device.
1726 This is the core driver for the timberdale FPGA. This device is a
1730 for in-vehicle infontainment, called Russellville.
1774 tristate "TQ-Systems IO controller TQMX86"
1778 TQ-Systems IO controller and watchdog device, found on their
1811 audio SoC core functionality controlled via I2C.
1820 audio SoC core functionality controlled via SPI.
1904 systems. This option enables core support for the WM8350 with
1915 The WM8994 is a highly integrated hi-fi CODEC designed for
1919 core support for the WM8994, in order to use the actual
1929 The WM9705, WM9712 and WM9713 is a highly integrated hi-fi CODEC
1932 supported via the relevant subsystems. This driver provides core
1943 in various ST Microelectronics and ST-Ericsson embedded
1968 Management IC. BD71837 is general purpose single-chip power
1969 management IC for battery-powered portable devices. It contains
1970 3 ultra-low current consumption buck converters, 3 LDOs and 2 LED
1971 drivers. Also included are 4 GPIOs, a real-time clock (RTC), a 32kHz
1972 crystal oscillator, high-accuracy VREF for use with an external ADC,
1985 Power Management ICs. BD71828GW and BD71815AGW are single-chip power
1986 management ICs mainly for battery-powered portable devices.
1989 also a single-cell linear charger, a Coulomb counter, a real-time
2001 designed to be used to power R-Car series processors.
2004 tristate "Support for STM32 Low-Power Timer"
2010 Select this option to enable STM32 Low-Power Timer driver
2014 To compile this driver as a module, choose M here: the
2015 module will be called stm32-lptimer.
2037 the relevant subsystems. This driver provides core support for the
2041 To compile this driver as a module, choose M here: the
2042 module will be called stpmic1.
2045 tristate "Support for STMicroelectronics Multi-Function eXpander (STMFX)"
2051 Support for the STMicroelectronics Multi-Function eXpander.
2101 power-on options, power-off control and system FAN control on recent
2169 tristate "RAVE SP MCU core driver"
2177 bool "SGI IOC3 core driver"
2181 This option enables basic support for the SGI IOC3-based