Lines Matching full:reverse

167 	/* The initial reverse control channel amplitude. */
253 	 * We must sleep after any change to the forward or reverse channel  in max9286_i2c_mux_configure()
270 	 * Ensure that both the forward and reverse channel are disabled on the  in max9286_i2c_mux_close()
353 	/* Reverse channel transmission time: default to 1. */  in max9286_reverse_channel_setup()
357 	 * Reverse channel setup.  in max9286_reverse_channel_setup()
359 	 * - Enable custom reverse channel configuration (through register 0x3f)  in max9286_reverse_channel_setup()
361 	 * - Adjust reverse channel amplitude: values > 130 are programmed  in max9286_reverse_channel_setup()
567 	 * All enabled sources have probed and enabled their reverse control  in max9286_notify_bound()
570 	 * - Increase the reverse channel amplitude to compensate for the  in max9286_notify_bound()
660 		 * reverse channel as GPIO. We must open all channels while  in max9286_s_stream()
1235 	 * Parse the initial value of the reverse channel amplitude from  in max9286_parse_dt()
1242 				 "maxim,reverse-channel-microvolt",  in max9286_parse_dt()