Lines Matching full:this
5 This option provides the function gpio_led_register_device.
6 As this function is used by arch code it must not be compiled as a
12 Say Y to enable Linux LED support. This allows control of supported
20 This option enables the LED sysfs class in /sys/class/leds. You'll
21 need this to do anything useful with LEDs. If unsure, say Y.
27 This option enables the flash LED sysfs class in /sys/class/leds.
29 and kernel internal API to it. You'll need this to provide support
37 This option enables the multicolor LED sysfs class in /sys/class/leds.
39 and kernel internal API to it. You'll need this to provide support
40 for multicolor LEDs that are grouped together. This class is not
47 This option enables support for the brightness_hw_changed attribute
59 This option enables support for on-chip LED drivers found on Marvell
66 This option enables support for the AN30259A 3-channel
69 To compile this driver as a module, choose M here: the module
77 This driver makes the PC Engines APU1 front panel LEDs
83 To compile this driver as a module, choose M here: the
91 This driver adds support for controlling the front panel status
101 This option enables support for the AW2013 3-channel
104 To compile this driver as a module, choose M here: the module
113 This option enables support for LEDs connected to the BCM6328
122 This option enables support for LEDs connected to the BCM6358
131 This option enables support for LEDs offered by Motorola's
140 This option enables support for CR0014114 LED Board which
144 To compile this driver as a module, choose M here: the module
153 This option enables support for EL15203000 LED Board
157 To compile this driver as a module, choose M here: the module
167 This option enables basic support for the LEDs found on the front
176 This option enables support for the LCD backlight using
177 LM3530 ambient light sensor chip. This ALS chip can be
187 This option enables support for the LCD backlight using
188 LM3532 ambient light sensor chip. This ALS chip can be
197 This option enables support for the LEDs on National Semiconductor /
210 This option enables support for LEDs connected to LM3642.
220 This option enables support for the TI LM3692x family
228 This option enables support for the LEDs on Sharp Locomo.
236 This option enables support for the so called "User LED" of
244 This option enables support for on-chip LED drivers found on
252 This option enables support for LEDs connected to GPIO lines
260 This option enables support for the Soekris net4801 and net4826 error
268 This option enables support for the LEDs on the Freecom FSG-3.
275 This option enables support for the PCEngines WRAP programmable LEDs.
282 This option enables support for the front LED on Cobalt Qube series
289 This option enables support for the Cobalt Raq series LEDs.
297 This option enables support for the Left, Middle, and Right
305 Choose this option if you want to use the notification LED on
313 This option enables LED support for the handheld
321 This option enables support for NXP pca9532
340 This option enables support for the LEDs connected to GPIO
351 This option enables support for LEDs connected to the National
355 To compile this driver as a module, choose M here: the
365 This option enables support for LEDs connected to the Texas
368 To compile this driver as a module, choose M here: the
379 To compile this driver as a module, choose M here: the
391 This option supports common operations for LP5521/5523/55231/5562/8501
442 This option enables support for the Keyboard LEDs on the LP8788 PMIC.
451 This option enables support for the display cluster LEDs
460 This driver makes the mail LED accessible from userspace
461 programs through the leds subsystem. This LED have three
465 or through /sys/class/leds/clevo::mail/brightness. As this LED
470 This module can drive the mail LED for the following notebooks:
483 To compile this driver as a module, choose M here: the
491 This option enables support for LEDs connected to PCA955x
511 This option enables support for LEDs connected to the PCA963x
520 This option enables support for the status LEDs of the WM831x
528 This option enables support for LEDs driven by the Wolfson
536 This option enables support for on-chip LED drivers found
544 This option enables support for on-chip LED drivers found
552 This option enables support for DAC124S085 SPI DAC from NatSemi,
560 This option enables support for pwm driven LEDs
567 This option enables support for regulator driven LEDs.
574 This option enables support for BD2802GU RGB LED driver chips
583 This option enables support for the Intel SS4200 series of
585 drive or power LEDs on the front panel. Using this driver
593 This option enables support for LEDs driven by a Linear Technology
594 LT3593 controller. This controller uses a special one-wire pulse
602 This option enables support for on-chip LED drivers found
605 To compile this driver as a module, choose M here: the module will
613 This option enables support for on-chip LED drivers found
622 This option enables support for the dual-GPIO LEDs found on the
637 This option enables support for LEDs found on the LaCie 2Big
647 This option enables support for the LEDs on the HTC ASIC3. The HTC
649 cannot be used. This driver supports hardware blinking with an on+off
656 This option enables support for LEDs connected to TC6507
665 This option enables support for Texas Instruments TLC59108
678 This option enables support for on-chip LED drivers on
686 This option enables support for LEDs connected to LM3554
693 This option enables support for the LEDs on the Bachmann OT200.
702 This driver can also be built as a module. If so the module
710 This option enables support for LEDs connected to ISSI IS31FL319x
714 This driver can also be built as a module. If so the module will be
733 This driver can also be built as a module. If so the module will be
743 This option enables support for the BlinkM RGB LED connected
752 This option enables support for the system LEDs present on
753 PowerNV platforms. Say 'y' to enable this support in kernel.
754 To compile this driver as a module, choose 'm' here: the module
763 This option enables support for the LEDs on syscon type
764 devices. This will only work with device tree enabled
772 Choose this option if you want to use the LED drivers in
780 This option enables support for the LEDs on the Mellanox
787 This option enables support for the LEDs on the Mellanox Ethernet and
789 device add call. Say Y to enable these. To compile this driver as a
796 This option enables support for userspace LEDs. Say 'y' to enable this
797 support in kernel. To compile this driver as a module, choose 'm' here:
805 This option enables support for the User1 and User2 LEDs on NI
808 To compile this driver as a module, choose M here: the module
817 This option enables support for LED controller which use a single byte
827 This supports common features between the TI LM3532, LM3631, LM3632,
836 This supports the LED device LM3697.
844 This supports the LED device LM36274.
852 This driver supports TPS61050/TPS61052 LED chips.
861 This option enables support for the Red and White LEDs of
864 To compile this driver as a module, choose M here: the module
871 This option enables support for the Power Button LED of