Lines Matching +full:ast2500 +full:- +full:sgpio
1 # SPDX-License-Identifier: GPL-2.0-only
57 non-sleeping contexts. They can make bitbanged serial protocols
116 tristate "GPIO driver for 74xx-ICs with MMIO access"
120 Say yes here to support GPIO functionality for 74xx-compatible ICs
136 If driver is built as a module it will be called gpio-altera.
151 Say Y here to support Aspeed AST2400 and AST2500 GPIO controllers.
154 bool "Aspeed SGPIO support"
159 Say Y here to support Aspeed AST2500 SGPIO functionality.
287 tristate "Generic memory-mapped GPIO controller support (MMIO platform device)"
290 Say yes here to support basic platform_device memory-mapped GPIO controllers.
309 This GPIO controller support double-edge interrupt and multi-core
328 ICH-based chipsets. Currently supported devices: ICH6, ICH7, ICH8
346 depends on ARM # For <asm/mach-types.h>
364 bool "Loongson-2/3 GPIO support"
367 driver for GPIO functionality on Loongson-2F/3A/3B processors.
454 Say yes here to support the on-chip GPIO lines on the OCTEON
489 tristate "Renesas R-Car and RZ/G GPIO support"
493 Say yes here to support GPIO on Renesas R-Car or RZ/G SoCs.
513 are grouped in four 8-bit wide ports.
520 A 32-bit single register GPIO fixed in/out implementation. This
541 maintain their value during backup/self-refresh.
559 via a SIOX bus and have a number of fixed-direction I/O lines.
567 This is a single-register MMIO GPIO driver for complex cases
638 tristate "TS-4800 DIO blocks and compatibles"
643 This driver support TS-4800 FPGA GPIO controllers.
646 tristate "Cavium ThunderX/OCTEON-TX GPIO"
653 Say yes here to support the on-chip GPIO lines on the ThunderX
654 and OCTEON-TX families of SoCs.
682 tristate "NEC VR4100 series General-purpose I/O Uint support"
685 Say yes here to support the NEC VR4100 series General-purpose I/O Uint
707 bool "APM X-Gene GPIO controller support"
710 This driver is to support the GPIO block within the APM X-Gene SoC
716 tristate "APM X-Gene GPIO standby controller support"
722 This driver supports the GPIO block within the APM X-Gene
774 tristate "GPIO support for AMD Fusion Controller Hub (G-series SOCs)"
777 as found on G-series SOCs (eg. GX-412TC)
803 be called gpio-idt3243x.
807 menu "Port-mapped I/O GPIO drivers"
811 tristate "ACCES 104-DIO-48E GPIO support"
816 Enables GPIO support for the ACCES 104-DIO-48E series (104-DIO-48E,
817 104-DIO-24E). The base port addresses for the devices may be
822 tristate "ACCES 104-IDIO-16 GPIO support"
827 Enables GPIO support for the ACCES 104-IDIO-16 family (104-IDIO-16,
828 104-IDIO-16E, 104-IDO-16, 104-IDIO-8, 104-IDIO-8E, 104-IDO-8). The
834 tristate "ACCES 104-IDI-48 GPIO support"
839 Enables GPIO support for the ACCES 104-IDI-48 family (104-IDI-48A,
840 104-IDI-48AC, 104-IDI-48B, 104-IDI-48BC). The base port addresses for
848 This option enables support for GPIOs found on Fintek Super-I/O
852 be called f7188x-gpio.
855 tristate "Diamond Systems GPIO-MM GPIO support"
859 Enables GPIO support for the Diamond Systems GPIO-MM and GPIO-MM-12.
861 The Diamond Systems GPIO-MM device features 48 lines of digital I/O
895 system from the Suspend-to-RAM state.
901 Twenty-one are powered by the core power rail and 9 from the
914 be called gpio-sch311x.
917 tristate "TS-5500 DIO blocks and compatibles"
922 blocks of the TS-5500: DIO1, DIO2 and the LCD port, and the TS-5600
935 boot-time parameter "gpio_winbond.gpios" with a bitmask of GPIO
939 be called gpio-winbond.
971 tristate "Avionic Design N-bit GPIO expander"
987 Expander. This is used at least on the Cambria GW2358-4.
993 GPIO driver for Maxim MAX7300 I2C-based GPIO expander.
996 tristate "MAX7319, MAX7320-7327 I2C Port Expanders"
998 Say yes here to support the MAX7319, MAX7320-7327 series of I2C
1000 Input (designated by 'I'), Push-Pull Output ('O'), or Open-Drain
1025 Say yes here to provide access to several register-oriented
1050 tristate "PCA9570 4-Bit I2C GPO expander"
1055 be called gpio-pca9570.
1062 Say yes here to provide access to most "quasi-bidirectional" I2C
1079 This driver provides an in-kernel interface to those GPIOs using
1080 platform-neutral GPIO calls.
1083 tristate "TPIC2810 8-Bit I2C GPO expander"
1088 be called gpio-tpic2810.
1096 Series supported include TS-4100, TS-4900, TS-7970 and TS-7990.
1106 This option enables support for on-chip GPIO found
1132 will be called gpio-bd70528.
1142 will be called gpio-bd71815.
1154 will be called gpio-bd71828.
1165 will be called gpio-bd9571mwv.
1178 called gpio-crystalcove.
1206 If driver is built as a module it will be called gpio-da9055.
1218 will be called gpio-dln2.
1229 tristate "Janz VMOD-TTL Digital IO Module"
1232 This enables support for the Janz VMOD-TTL Digital IO module.
1244 called gpio-kempld.
1262 called gpio-lp873x.
1272 called gpio-lp87565.
1323 called gpio-sl28cpld.
1398 tristate "TQ-Systems QTMX86 GPIO"
1409 Say yes here to access the GPIO signals of various multi-function
1437 called gpio-wcove.
1485 This chip can be found on Miro, Hauppauge and STB TV-cards.
1490 Documentation/driver-api/gpio/bt8xxgpio.rst
1522 Hub) which is for IVI(In-Vehicle Infotainment) use.
1542 tristate "ACCES PCI-IDIO-16 GPIO support"
1545 Enables GPIO support for the ACCES PCI-IDIO-16. An interrupt is
1551 tristate "ACCES PCIe-IDIO-24 GPIO support"
1554 Enables GPIO support for the ACCES PCIe-IDIO-24 family (PCIe-IDIO-24,
1555 PCIe-IDI-24, PCIe-IDO-24, PCIe-IDIO-12). An interrupt is generated
1561 tristate "RDC R-321x GPIO support"
1582 tristate "74x164 serial-in/parallel-out 8-bits shift register"
1585 Driver for 74x164 compatible serial-in/parallel-out 8-outputs
1594 MAX31953 and MAX31963 industrial serializer, a daisy-chainable
1603 GPIO driver for Maxim MAX7301 SPI-based GPIO expander.
1606 tristate "Freescale MC33880 high-side/low-side switch"
1608 SPI driver for Freescale MC33880 high-side/low-side switch.
1612 tristate "Generic parallel-in/serial-out shift register"
1614 GPIO driver for SPI compatible parallel-in/serial-out shift
1618 tristate "EXAR XRA1403 16-bit GPIO expander"
1621 GPIO driver for EXAR XRA1403 16-bit SPI-based GPIO expander.
1658 - Assign permissions for a collection of GPIO lines to a user,
1659 - Export a collection of GPIO lines to a virtual machine,
1660 - Provide a generic driver for a GPIO-operated device in an
1671 tools/testing/selftests/gpio/gpio-mockup.sh. Reference the usage in
1678 Say Y here to enable guest support for virtio-based GPIO controllers.