28 	bt_dev_dbg(hdev, "QCA Version Request");  in qca_read_soc_version()
45 		bt_dev_err(hdev, "Reading QCA version information failed (%d)",  in qca_read_soc_version()
51 		bt_dev_err(hdev, "QCA Version size mismatch len %d", skb->len);  in qca_read_soc_version()
58 		bt_dev_err(hdev, "QCA TLV with no header");  in qca_read_soc_version()
65 		bt_dev_err(hdev, "QCA Wrong packet received %d %d", edl->cresp,  in qca_read_soc_version()
76 	bt_dev_info(hdev, "QCA Product ID   :0x%08x",  in qca_read_soc_version()
78 	bt_dev_info(hdev, "QCA SOC Version  :0x%08x",  in qca_read_soc_version()
80 	bt_dev_info(hdev, "QCA ROM Version  :0x%08x",  in qca_read_soc_version()
82 	bt_dev_info(hdev, "QCA Patch Version:0x%08x",  in qca_read_soc_version()
91 		bt_dev_err(hdev, "QCA Failed to get version (%d)", err);  in qca_read_soc_version()
104 	bt_dev_dbg(hdev, "QCA read fw build info");  in qca_read_fw_build_info()
111 		bt_dev_err(hdev, "Reading QCA fw build info failed (%d)",  in qca_read_fw_build_info()
118 		bt_dev_err(hdev, "QCA read fw build info with no header");  in qca_read_fw_build_info()
125 		bt_dev_err(hdev, "QCA Wrong packet received %d %d", edl->cresp,  in qca_read_fw_build_info()
149 	bt_dev_dbg(hdev, "QCA HCI_RESET");  in qca_send_reset()
154 		bt_dev_err(hdev, "QCA Reset failed (%d)", err);  in qca_send_reset()
168 	bt_dev_dbg(hdev, "QCA pre shutdown cmd");  in qca_send_pre_shutdown_cmd()
175 		bt_dev_err(hdev, "QCA preshutdown_cmd failed (%d)", err);  in qca_send_pre_shutdown_cmd()
337 		bt_dev_err(hdev, "QCA Failed to send TLV segment (%d)", err);  in qca_tlv_send_segment()
342 		bt_dev_err(hdev, "QCA TLV response size mismatch");  in qca_tlv_send_segment()
355 		bt_dev_err(hdev, "QCA TLV with error stat 0x%x rtype 0x%x",  in qca_tlv_send_segment()
365 		bt_dev_err(hdev, "QCA TLV with error stat 0x%x rtype 0x%x (0x%x)",  in qca_tlv_send_segment()
410 	bt_dev_info(hdev, "QCA Downloading %s", config->fwname);  in qca_download_firmware()
418 			bt_dev_dbg(hdev, "QCA Failed to request file: %s (%d)",  in qca_download_firmware()
422 				 "qca/msbtfw%02x.tlv", rom_ver);  in qca_download_firmware()
423 			bt_dev_info(hdev, "QCA Downloading %s", config->fwname);  in qca_download_firmware()
426 				bt_dev_err(hdev, "QCA Failed to request file: %s (%d)",  in qca_download_firmware()
431 			bt_dev_err(hdev, "QCA Failed to request file: %s (%d)",  in qca_download_firmware()
440 		bt_dev_err(hdev, "QCA Failed to allocate memory for file: %s",  in qca_download_firmware()
499 		bt_dev_err(hdev, "QCA Failed to disable soc logging(%d)", err);  in qca_disable_soc_logging()
522 		bt_dev_err(hdev, "QCA Change address command failed (%d)", err);  in qca_set_bdaddr_rome()
541 	bt_dev_dbg(hdev, "QCA setup on UART");  in qca_uart_setup()
545 	bt_dev_info(hdev, "QCA controller version 0x%08x", soc_ver);  in qca_uart_setup()
558 			 "qca/crbtfw%02x.tlv", rom_ver);  in qca_uart_setup()
561 			 "qca/htbtfw%02x.tlv", rom_ver);  in qca_uart_setup()
568 			 "qca/msbtfw%02x.mbn", rom_ver);  in qca_uart_setup()
571 			 "qca/rampatch_%08x.bin", soc_ver);  in qca_uart_setup()
576 		bt_dev_err(hdev, "QCA Failed to download patch (%d)", err);  in qca_uart_setup()
587 			 "qca/%s", firmware_name);  in qca_uart_setup()
591 				 "qca/crnv%02xu.bin", rom_ver);  in qca_uart_setup()
594 				 "qca/crnv%02x.bin", rom_ver);  in qca_uart_setup()
599 			 "qca/htnv%02x.bin", rom_ver);  in qca_uart_setup()
602 			 "qca/msnv%02x.bin", rom_ver);  in qca_uart_setup()
605 			 "qca/nvm_%08x.bin", soc_ver);  in qca_uart_setup()
609 		bt_dev_err(hdev, "QCA Failed to download NVM (%d)", err);  in qca_uart_setup()
636 		bt_dev_err(hdev, "QCA Failed to run HCI_RESET (%d)", err);  in qca_uart_setup()
647 	bt_dev_info(hdev, "QCA setup on UART is completed");  in qca_uart_setup()
662 		bt_dev_err(hdev, "QCA Change address cmd failed (%d)", err);  in qca_set_bdaddr()
673 MODULE_AUTHOR("Ben Young Tae Kim <ytkim@qca.qualcomm.com>");