59 	 * fully operational, but have the danger of duplicate addresses  in btintel_check_bdaddr()
552 			/* If image type is Operational firmware (0x03), then  in btintel_parse_version_tlv()
564 			/* If image type is Operational firmware (0x03), then  in btintel_parse_version_tlv()
1091 	 * mode or is running operational firmware. The value 0x06 identifies  in btintel_download_firmware()
1092 	 * the bootloader and the value 0x23 identifies the operational  in btintel_download_firmware()
1096 	 * to bootloader when operational so the new firmware can be loaded.  in btintel_download_firmware()
1133 	 * mode or is running operational firmware. The value 0x01 identifies  in btintel_download_fw_tlv()
1134 	 * the bootloader and the value 0x03 identifies the operational  in btintel_download_fw_tlv()
1138 	 * to bootloader when operational so the new firmware can be loaded.  in btintel_download_fw_tlv()
1680 	 * is done by the operational firmware sending bootup notification.  in btintel_boot()
1682 	 * Booting into operational firmware should not take longer than  in btintel_boot()
1737 	 * mode or is running operational firmware. The value 0x06 identifies  in btintel_download_fw()
1738 	 * the bootloader and the value 0x23 identifies the operational  in btintel_download_fw()
1741 	 * When the operational firmware is already present, then only  in btintel_download_fw()
1784 	 * also be no valid address for the operational firmware.  in btintel_download_fw()
1868 	/* Before switching the device into operational mode and with that  in btintel_download_fw()
1912 	/* controller is already having an operational firmware */  in btintel_bootloader_setup()
1928 		/* Once the device is running in operational mode, it needs to  in btintel_bootloader_setup()
1994 	 * mode or is running operational firmware. The value 0x03 identifies  in btintel_prepare_fw_download_tlv()
1995 	 * the bootloader and the value 0x23 identifies the operational  in btintel_prepare_fw_download_tlv()
1998 	 * When the operational firmware is already present, then only  in btintel_prepare_fw_download_tlv()
2012 	 * also be no valid address for the operational firmware.  in btintel_prepare_fw_download_tlv()
2066 	/* Before switching the device into operational mode and with that  in btintel_prepare_fw_download_tlv()
2109 	/* check if controller is already having an operational firmware */  in btintel_bootloader_setup_tlv()
2120 	/* Once the device is running in operational mode, it needs to  in btintel_bootloader_setup_tlv()