Lines Matching +full:system +full:- +full:on +full:- +full:module
1 # SPDX-License-Identifier: GPL-2.0
5 # PARIDE doesn't need PARPORT, but if PARPORT is configured as a module,
6 # PARIDE must also be a module.
9 comment "Parallel IDE high-level drivers"
10 depends on PARIDE
14 depends on PARIDE
16 This option enables the high-level driver for IDE-type disk devices
20 it as a loadable module. The module will be called pd. You
22 system. Among the devices supported by this driver are the SyQuest
23 EZ-135, EZ-230 and SparQ drives, the Avatar Shark and the backpack
27 tristate "Parallel port ATAPI CD-ROMs"
28 depends on PARIDE
31 This option enables the high-level driver for ATAPI CD-ROM devices
34 parallel port ATAPI CD-ROM driver, otherwise you should answer M to
35 build it as a loadable module. The module will be called pcd. You
37 system. Among the devices supported by this driver are the
38 MicroSolutions backpack CD-ROM drives and the Freecom Power CD. If
39 you have such a CD-ROM drive, you should also say Y or M to "ISO
40 9660 CD-ROM file system support" below, because that's the file
41 system used on CD-ROMs.
45 depends on PARIDE
47 This option enables the high-level driver for ATAPI disk devices
51 to build it as a loadable module. The module will be called pf.
53 your system. Among the devices supported by this driver are the
55 LS-120 drive.
59 depends on PARIDE
61 This option enables the high-level driver for ATAPI tape devices
65 to build it as a loadable module. The module will be called pt.
67 your system. Among the devices supported by this driver is the
72 depends on PARIDE
74 This option enables a special high-level driver for generic ATAPI
81 otherwise you should answer M to build it as a loadable module. The
82 module will be called pg.
85 your system.
95 depends on PARIDE
98 tristate "ATEN EH-100 protocol"
99 depends on PARIDE
101 This option enables support for the ATEN EH-100 parallel port IDE
106 loadable module. The module will be called aten. You must also
107 have a high-level driver for the type of device that you want to
112 depends on PARIDE
117 Series noted on the bottom of the drive. Series 6 drivers will.
119 In other words, if your BACKPACK drive doesn't say "Series 6" on the
124 answer M to build it as a loadable module. The module will be
125 called bpck. You must also have a high-level driver for the type
130 depends on PARIDE && !64BIT
135 on the bottom of the drive. Series 5 drivers don't always have it
138 In other words, if your BACKPACK drive says "Series 6" on the
143 answer M to build it as a loadable module. The module will be
144 called bpck6. You must also have a high-level driver for the type
149 depends on PARIDE
155 module. The module will be called comm. You must also have
156 a high-level driver for the type of device that you want to support.
159 tristate "DataStor EP-2000 protocol"
160 depends on PARIDE
162 This option enables support for the EP-2000 parallel port IDE
166 module. The module will be called dstr. You must also have
167 a high-level driver for the type of device that you want to support.
170 tristate "FIT TD-2000 protocol"
171 depends on PARIDE
173 This option enables support for the TD-2000 parallel port IDE
178 to build it as a loadable module. The module will be called ktti.
179 You must also have a high-level driver for the type of device that
183 tristate "FIT TD-3000 protocol"
184 depends on PARIDE
186 This option enables support for the TD-3000 parallel port IDE
188 used in newer models of their portable disk, CD-ROM and PD/CD
191 should answer M to build it as a loadable module. The module will be
192 called fit3. You must also have a high-level driver for the type
197 depends on PARIDE
202 Hewlett-Packard, SyQuest, Imation and Avatar. If you chose to build
205 loadable module. The module will be called epat. You must also
206 have a high-level driver for the type of device that you want to
211 depends on PARIDE_EPAT
215 (LS-120) drive.
219 depends on PARIDE
223 found in some no-name kits. If you chose to build PARIDE support
226 module. The module will be called epia. You must also have a
227 high-level driver for the type of device that you want to support.
230 tristate "Freecom IQ ASIC-2 protocol"
231 depends on PARIDE
237 should answer M to build it as a loadable module. The module will be
238 called friq. You must also have a high-level driver for the type
243 depends on PARIDE
248 should answer M to build it as a loadable module. The module will be
249 called frpw. You must also have a high-level driver for the type
253 tristate "KingByte KBIC-951A/971A protocols"
254 depends on PARIDE
256 This option enables support for the KBIC-951A and KBIC-971A parallel
258 adapters appear in many no-name portable disk and CD-ROM products,
261 otherwise you should answer M to build it as a loadable module. The
262 module will be called kbic. You must also have a high-level driver
267 depends on PARIDE
274 loadable module. The module will be called ktti. You must also
275 have a high-level driver for the type of device that you want to
280 depends on PARIDE
286 should answer M to build it as a loadable module. The module will
287 be called on20. You must also have a high-level driver for the
292 depends on PARIDE
298 should answer M to build it as a loadable module. The module will be
299 called on26. You must also have a high-level driver for the type