Lines Matching +full:full +full:- +full:pwr +full:- +full:cycle
1 // SPDX-License-Identifier: GPL-2.0
3 * Device Tree Source for the R-Car Gen3 ULCB board
10 * SSI-AK4613
11 * aplay -D plughw:0,0 xxx.wav
12 * arecord -D plughw:0,0 xxx.wav
13 * SSI-HDMI
14 * aplay -D plughw:0,1 xxx.wav
17 #include <dt-bindings/gpio/gpio.h>
18 #include <dt-bindings/input/input.h>
21 model = "Renesas R-Car Gen3 ULCB board";
32 stdout-path = "serial0:115200n8";
35 audio_clkout: audio-clkout {
38 * but needed to avoid cs2000/rcar_sound probe dead-lock
40 compatible = "fixed-clock";
41 #clock-cells = <0>;
42 clock-frequency = <12288000>;
45 hdmi0-out {
46 compatible = "hdmi-connector";
56 compatible = "gpio-keys";
58 key-1 {
61 wakeup-source;
62 debounce-interval = <20>;
68 compatible = "gpio-leds";
79 compatible = "regulator-fixed";
80 regulator-name = "fixed-1.8V";
81 regulator-min-microvolt = <1800000>;
82 regulator-max-microvolt = <1800000>;
83 regulator-boot-on;
84 regulator-always-on;
88 compatible = "regulator-fixed";
89 regulator-name = "fixed-3.3V";
90 regulator-min-microvolt = <3300000>;
91 regulator-max-microvolt = <3300000>;
92 regulator-boot-on;
93 regulator-always-on;
97 compatible = "audio-graph-card";
98 label = "rcar-sound";
105 vcc_sdhi0: regulator-vcc-sdhi0 {
106 compatible = "regulator-fixed";
108 regulator-name = "SDHI0 Vcc";
109 regulator-min-microvolt = <3300000>;
110 regulator-max-microvolt = <3300000>;
113 enable-active-high;
116 vccq_sdhi0: regulator-vccq-sdhi0 {
117 compatible = "regulator-gpio";
119 regulator-name = "SDHI0 VccQ";
120 regulator-min-microvolt = <1800000>;
121 regulator-max-microvolt = <3300000>;
124 gpios-states = <1>;
129 compatible = "fixed-clock";
130 #clock-cells = <0>;
131 clock-frequency = <24576000>;
134 x23_clk: x23-clock {
135 compatible = "fixed-clock";
136 #clock-cells = <0>;
137 clock-frequency = <25000000>;
142 cpu-supply = <&dvfs>;
146 clock-frequency = <22579200>;
150 pinctrl-0 = <&avb_pins>;
151 pinctrl-names = "default";
152 phy-handle = <&phy0>;
153 tx-internal-delay-ps = <2000>;
156 phy0: ethernet-phy@0 {
157 rxc-skew-ps = <1500>;
159 interrupt-parent = <&gpio2>;
161 reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
174 clock-frequency = <16666666>;
178 clock-frequency = <32768>;
188 remote-endpoint = <&hdmi0_con>;
194 remote-endpoint = <&rsnd_for_hdmi>;
201 remote-endpoint = <&rcar_dw_hdmi0_out>;
205 pinctrl-0 = <&i2c2_pins>;
206 pinctrl-names = "default";
210 clock-frequency = <100000>;
213 compatible = "asahi-kasei,ak4613";
214 #sound-dai-cells = <0>;
218 asahi-kasei,in1-single-end;
219 asahi-kasei,in2-single-end;
220 asahi-kasei,out1-single-end;
221 asahi-kasei,out2-single-end;
222 asahi-kasei,out3-single-end;
223 asahi-kasei,out4-single-end;
224 asahi-kasei,out5-single-end;
225 asahi-kasei,out6-single-end;
229 remote-endpoint = <&rsnd_for_ak4613>;
234 cs2000: clk-multiplier@4f {
235 #clock-cells = <0>;
236 compatible = "cirrus,cs2000-cp";
239 clock-names = "clk_in", "ref_clk";
241 assigned-clocks = <&cs2000>;
242 assigned-clock-rates = <24576000>; /* 1/1 divide */
249 clock-frequency = <400000>;
251 versaclock5: clock-generator@6a {
254 #clock-cells = <1>;
256 clock-names = "xin";
263 clock-frequency = <400000>;
266 pinctrl-0 = <&irq0_pins>;
267 pinctrl-names = "default";
271 interrupt-parent = <&intc_ex>;
273 interrupt-controller;
274 #interrupt-cells = <2>;
275 gpio-controller;
276 #gpio-cells = <2>;
277 rohm,ddr-backup-power = <0xf>;
278 rohm,rstbmode-pulse;
282 regulator-name = "dvfs";
283 regulator-min-microvolt = <750000>;
284 regulator-max-microvolt = <1030000>;
285 regulator-boot-on;
286 regulator-always-on;
297 pinctrl-0 = <&scif_clk_pins>;
298 pinctrl-names = "default";
308 drive-strength = <24>;
314 drive-strength = <12>;
341 power-source = <3300>;
347 power-source = <1800>;
353 power-source = <1800>;
361 sound_clk_pins: sound-clk {
374 pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
375 pinctrl-names = "default";
378 #sound-dai-cells = <0>;
381 #clock-cells = <1>;
382 clock-frequency = <12288000 11289600>;
406 #address-cells = <1>;
407 #size-cells = <0>;
411 remote-endpoint = <&ak4613_endpoint>;
413 dai-format = "left_j";
414 bitclock-master = <&rsnd_for_ak4613>;
415 frame-master = <&rsnd_for_ak4613>;
424 remote-endpoint = <&dw_hdmi0_snd_in>;
426 dai-format = "i2s";
427 bitclock-master = <&rsnd_for_hdmi>;
428 frame-master = <&rsnd_for_hdmi>;
437 timeout-sec = <60>;
442 pinctrl-0 = <&scif2_pins>;
443 pinctrl-names = "default";
449 clock-frequency = <14745600>;
453 pinctrl-0 = <&sdhi0_pins>;
454 pinctrl-1 = <&sdhi0_pins_uhs>;
455 pinctrl-names = "default", "state_uhs";
457 vmmc-supply = <&vcc_sdhi0>;
458 vqmmc-supply = <&vccq_sdhi0>;
459 cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
460 bus-width = <4>;
461 sd-uhs-sdr50;
462 sd-uhs-sdr104;
467 /* used for on-board 8bit eMMC */
468 pinctrl-0 = <&sdhi2_pins>;
469 pinctrl-1 = <&sdhi2_pins>;
470 pinctrl-names = "default", "state_uhs";
472 vmmc-supply = <®_3p3v>;
473 vqmmc-supply = <®_1p8v>;
474 bus-width = <8>;
475 mmc-hs200-1_8v;
476 mmc-hs400-1_8v;
477 no-sd;
478 no-sdio;
479 non-removable;
480 full-pwr-cycle-in-suspend;
485 shared-pin;
489 pinctrl-0 = <&usb1_pins>;
490 pinctrl-names = "default";