Lines Matching +full:fixed +full:- +full:frequency
1 // SPDX-License-Identifier: GPL-2.0
9 #include <dt-bindings/gpio/gpio.h>
22 stdout-path = "serial0:115200n8";
25 hdmi0-out {
26 compatible = "hdmi-connector";
31 remote-endpoint = <&rcar_dw_hdmi0_out>;
37 compatible = "gpio-leds";
57 compatible = "regulator-fixed";
58 regulator-name = "fixed-1.8V";
59 regulator-min-microvolt = <1800000>;
60 regulator-max-microvolt = <1800000>;
61 regulator-boot-on;
62 regulator-always-on;
66 compatible = "regulator-fixed";
67 regulator-name = "fixed-3.3V";
68 regulator-min-microvolt = <3300000>;
69 regulator-max-microvolt = <3300000>;
70 regulator-boot-on;
71 regulator-always-on;
75 compatible = "audio-graph-card";
77 label = "rcar-sound";
82 vbus0_usb2: regulator-vbus0-usb2 {
83 compatible = "regulator-fixed";
85 regulator-name = "USB20_VBUS0";
86 regulator-min-microvolt = <5000000>;
87 regulator-max-microvolt = <5000000>;
90 enable-active-high;
93 vccq_sdhi0: regulator-vccq-sdhi0 {
94 compatible = "regulator-gpio";
96 regulator-name = "SDHI0 VccQ";
97 regulator-min-microvolt = <1800000>;
98 regulator-max-microvolt = <3300000>;
101 gpios-states = <1>;
105 x302_clk: x302-clock {
106 compatible = "fixed-clock";
107 #clock-cells = <0>;
108 clock-frequency = <33000000>;
111 x304_clk: x304-clock {
112 compatible = "fixed-clock";
113 #clock-cells = <0>;
114 clock-frequency = <25000000>;
119 clock-frequency = <22579200>;
135 clock-frequency = <16666666>;
139 clock-frequency = <32768>;
143 usb1-reset {
144 gpio-hog;
146 output-low;
147 line-name = "usb1-reset";
158 remote-endpoint = <&hdmi0_con>;
164 remote-endpoint = <&rsnd_endpoint>;
171 pinctrl-0 = <&hscif0_pins>;
172 pinctrl-names = "default";
174 uart-has-rtscts;
184 clock-frequency = <400000>;
187 versaclock5: clock-generator@6a {
190 #clock-cells = <1>;
192 clock-names = "xin";
205 clock-frequency = <100000000>;
209 pinctrl-0 = <&scif_clk_pins>;
210 pinctrl-names = "default";
230 power-source = <3300>;
236 power-source = <1800>;
242 power-source = <1800>;
248 power-source = <1800>;
264 bias-pull-up;
275 timeout-sec = <60>;
280 pinctrl-0 = <&scif2_pins>;
281 pinctrl-names = "default";
287 clock-frequency = <14745600>;
291 pinctrl-0 = <&sdhi0_pins>;
292 pinctrl-1 = <&sdhi0_pins_uhs>;
293 pinctrl-names = "default", "state_uhs";
295 vmmc-supply = <®_3p3v>;
296 vqmmc-supply = <&vccq_sdhi0>;
297 cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
298 bus-width = <4>;
299 sd-uhs-sdr50;
300 sd-uhs-sdr104;
306 pinctrl-0 = <&sdhi2_pins>;
307 pinctrl-names = "default";
309 vmmc-supply = <&wlan_en_reg>;
310 bus-width = <4>;
311 non-removable;
312 cap-power-off-card;
313 keep-power-in-suspend;
315 #address-cells = <1>;
316 #size-cells = <0>;
320 interrupt-parent = <&gpio2>;
326 pinctrl-0 = <&sdhi3_pins>;
327 pinctrl-1 = <&sdhi3_pins>;
328 pinctrl-names = "default", "state_uhs";
330 vmmc-supply = <®_3p3v>;
331 vqmmc-supply = <®_1p8v>;
332 bus-width = <8>;
333 mmc-hs200-1_8v;
334 no-sd;
335 no-sdio;
336 non-removable;
337 fixed-emmc-driver-type = <1>;
342 clock-frequency = <50000000>;
346 pinctrl-0 = <&usb0_pins>;
347 pinctrl-names = "default";
349 vbus-supply = <&vbus0_usb2>;
354 pinctrl-0 = <&usb1_pins>;
355 pinctrl-names = "default";
362 phy-names = "usb";
374 clock-frequency = <100000000>;
378 pinctrl-0 = <&usb30_pins>;
379 pinctrl-names = "default";