Lines Matching +full:dual +full:- +full:dsi +full:- +full:mode
1 // SPDX-License-Identifier: GPL-2.0
8 /dts-v1/;
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
16 compatible = "qcom,sdm845-mtp", "qcom,sdm845";
23 stdout-path = "serial0:115200n8";
26 vph_pwr: vph-pwr-regulator {
27 compatible = "regulator-fixed";
28 regulator-name = "vph_pwr";
29 regulator-min-microvolt = <3700000>;
30 regulator-max-microvolt = <3700000>;
35 * is always-on; model it as a fixed regulator.
37 vreg_s4a_1p8: pm8998-smps4 {
38 compatible = "regulator-fixed";
39 regulator-name = "vreg_s4a_1p8";
41 regulator-min-microvolt = <1800000>;
42 regulator-max-microvolt = <1800000>;
44 regulator-always-on;
45 regulator-boot-on;
47 vin-supply = <&vph_pwr>;
53 firmware-name = "qcom/sdm845/adsp.mdt";
57 pm8998-rpmh-regulators {
58 compatible = "qcom,pm8998-rpmh-regulators";
59 qcom,pmic-id = "a";
61 vdd-s1-supply = <&vph_pwr>;
62 vdd-s2-supply = <&vph_pwr>;
63 vdd-s3-supply = <&vph_pwr>;
64 vdd-s4-supply = <&vph_pwr>;
65 vdd-s5-supply = <&vph_pwr>;
66 vdd-s6-supply = <&vph_pwr>;
67 vdd-s7-supply = <&vph_pwr>;
68 vdd-s8-supply = <&vph_pwr>;
69 vdd-s9-supply = <&vph_pwr>;
70 vdd-s10-supply = <&vph_pwr>;
71 vdd-s11-supply = <&vph_pwr>;
72 vdd-s12-supply = <&vph_pwr>;
73 vdd-s13-supply = <&vph_pwr>;
74 vdd-l1-l27-supply = <&vreg_s7a_1p025>;
75 vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
76 vdd-l3-l11-supply = <&vreg_s7a_1p025>;
77 vdd-l4-l5-supply = <&vreg_s7a_1p025>;
78 vdd-l6-supply = <&vph_pwr>;
79 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
80 vdd-l9-supply = <&vreg_bob>;
81 vdd-l10-l23-l25-supply = <&vreg_bob>;
82 vdd-l13-l19-l21-supply = <&vreg_bob>;
83 vdd-l16-l28-supply = <&vreg_bob>;
84 vdd-l18-l22-supply = <&vreg_bob>;
85 vdd-l20-l24-supply = <&vreg_bob>;
86 vdd-l26-supply = <&vreg_s3a_1p35>;
87 vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
90 regulator-min-microvolt = <1100000>;
91 regulator-max-microvolt = <1100000>;
95 regulator-min-microvolt = <1352000>;
96 regulator-max-microvolt = <1352000>;
100 regulator-min-microvolt = <1904000>;
101 regulator-max-microvolt = <2040000>;
105 regulator-min-microvolt = <900000>;
106 regulator-max-microvolt = <1028000>;
128 regulator-min-microvolt = <880000>;
129 regulator-max-microvolt = <880000>;
130 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
135 regulator-min-microvolt = <1200000>;
136 regulator-max-microvolt = <1200000>;
137 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
138 regulator-always-on;
142 regulator-min-microvolt = <1000000>;
143 regulator-max-microvolt = <1000000>;
144 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
151 regulator-min-microvolt = <800000>;
152 regulator-max-microvolt = <800000>;
153 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
158 regulator-min-microvolt = <1856000>;
159 regulator-max-microvolt = <1856000>;
160 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
164 regulator-min-microvolt = <1800000>;
165 regulator-max-microvolt = <1800000>;
166 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
170 regulator-min-microvolt = <1200000>;
171 regulator-max-microvolt = <1248000>;
172 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
176 regulator-min-microvolt = <1704000>;
177 regulator-max-microvolt = <2928000>;
178 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
182 regulator-min-microvolt = <1704000>;
183 regulator-max-microvolt = <2928000>;
184 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
188 regulator-min-microvolt = <1000000>;
189 regulator-max-microvolt = <1048000>;
190 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
201 regulator-min-microvolt = <1800000>;
202 regulator-max-microvolt = <1800000>;
203 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
208 regulator-min-microvolt = <1800000>;
209 regulator-max-microvolt = <2960000>;
210 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
214 regulator-min-microvolt = <1800000>;
215 regulator-max-microvolt = <1800000>;
216 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
220 regulator-min-microvolt = <1800000>;
221 regulator-max-microvolt = <1800000>;
222 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
226 regulator-min-microvolt = <2704000>;
227 regulator-max-microvolt = <2704000>;
228 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
232 regulator-min-microvolt = <1304000>;
233 regulator-max-microvolt = <1304000>;
234 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
238 regulator-min-microvolt = <2704000>;
239 regulator-max-microvolt = <2960000>;
240 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
244 regulator-min-microvolt = <2856000>;
245 regulator-max-microvolt = <3104000>;
246 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
250 regulator-min-microvolt = <2704000>;
251 regulator-max-microvolt = <2960000>;
252 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
256 regulator-min-microvolt = <2704000>;
257 regulator-max-microvolt = <2960000>;
258 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
262 regulator-min-microvolt = <2864000>;
263 regulator-max-microvolt = <3312000>;
264 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
268 regulator-min-microvolt = <3000000>;
269 regulator-max-microvolt = <3312000>;
270 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
275 regulator-min-microvolt = <3088000>;
276 regulator-max-microvolt = <3088000>;
277 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
281 regulator-min-microvolt = <3300000>;
282 regulator-max-microvolt = <3312000>;
283 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
300 regulator-min-microvolt = <1200000>;
301 regulator-max-microvolt = <1200000>;
302 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
306 regulator-min-microvolt = <2856000>;
307 regulator-max-microvolt = <3008000>;
308 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
312 regulator-min-microvolt = <1800000>;
313 regulator-max-microvolt = <1800000>;
317 regulator-min-microvolt = <1800000>;
318 regulator-max-microvolt = <1800000>;
322 pmi8998-rpmh-regulators {
323 compatible = "qcom,pmi8998-rpmh-regulators";
324 qcom,pmic-id = "b";
326 vdd-bob-supply = <&vph_pwr>;
329 regulator-min-microvolt = <3312000>;
330 regulator-max-microvolt = <3600000>;
331 regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
332 regulator-allow-bypass;
336 pm8005-rpmh-regulators {
337 compatible = "qcom,pm8005-rpmh-regulators";
338 qcom,pmic-id = "c";
340 vdd-s1-supply = <&vph_pwr>;
341 vdd-s2-supply = <&vph_pwr>;
342 vdd-s3-supply = <&vph_pwr>;
343 vdd-s4-supply = <&vph_pwr>;
346 regulator-min-microvolt = <600000>;
347 regulator-max-microvolt = <600000>;
354 firmware-name = "qcom/sdm845/cdsp.mdt";
359 vdda-supply = <&vdda_mipi_dsi0_1p2>;
361 qcom,dual-dsi-mode;
362 qcom,master-dsi;
364 #address-cells = <1>;
365 #size-cells = <0>;
370 remote-endpoint = <&truly_in_0>;
371 data-lanes = <0 1 2 3>;
377 compatible = "truly,nt35597-2K-display";
379 vdda-supply = <&vreg_l14a_1p88>;
381 reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
382 mode-gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
385 #address-cells = <1>;
386 #size-cells = <0>;
391 remote-endpoint = <&dsi0_out>;
398 remote-endpoint = <&dsi1_out>;
407 vdds-supply = <&vdda_mipi_dsi0_pll>;
412 vdda-supply = <&vdda_mipi_dsi1_1p2>;
414 qcom,dual-dsi-mode;
417 assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
422 remote-endpoint = <&truly_in_1>;
423 data-lanes = <0 1 2 3>;
431 vdds-supply = <&vdda_mipi_dsi1_pll>;
435 protected-clocks = <GCC_QSPI_CORE_CLK>,
443 zap-shader {
444 memory-region = <&gpu_mem>;
445 firmware-name = "qcom/sdm845/a630_zap.mbn";
451 clock-frequency = <400000>;
456 memory-region = <&ipa_fw_mem>;
469 firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn";
479 pinctrl-names = "default";
480 pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data &sd_card_det_n>;
482 vmmc-supply = <&vreg_l21a_2p95>;
483 vqmmc-supply = <&vddpx_2>;
485 cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
495 reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
497 vcc-supply = <&vreg_l20a_2p95>;
498 vcc-max-microamp = <600000>;
504 vdda-phy-supply = <&vdda_ufs1_core>;
505 vdda-pll-supply = <&vdda_ufs1_1p2>;
520 vdd-supply = <&vdda_usb1_ss_core>;
521 vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
522 vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
524 qcom,imp-res-offset-value = <8>;
525 qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
526 qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
527 qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
533 vdda-phy-supply = <&vdda_usb1_ss_1p2>;
534 vdda-pll-supply = <&vdda_usb1_ss_core>;
544 * signal for this port on MTP. Thus (unless you have a non-compliant
546 * peripheral mode.
554 vdd-supply = <&vdda_usb2_ss_core>;
555 vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
556 vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
558 qcom,imp-res-offset-value = <8>;
559 qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>;
565 vdda-phy-supply = <&vdda_usb2_ss_1p2>;
566 vdda-pll-supply = <&vdda_usb2_ss_core>;
571 vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
572 vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
573 vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
574 vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
577 /* PINCTRL - additions to nodes defined in sdm845.dtsi */
582 drive-strength = <2>;
583 bias-disable;
588 pinconf-tx {
590 drive-strength = <2>;
591 bias-disable;
594 pinconf-rx {
596 drive-strength = <2>;
597 bias-pull-up;
602 gpio-reserved-ranges = <0 4>, <81 4>;
604 sdc2_clk: sdc2-clk {
607 bias-disable;
613 drive-strength = <16>;
617 sdc2_cmd: sdc2-cmd {
620 bias-pull-up;
621 drive-strength = <16>;
625 sdc2_data: sdc2-data {
628 bias-pull-up;
629 drive-strength = <16>;
633 sd_card_det_n: sd-card-det-n {
641 bias-pull-up;