Lines Matching +full:regulator +full:- +full:max +full:- +full:microvolt
1 // SPDX-License-Identifier: BSD-3-Clause
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
16 pm7325-regulators {
17 compatible = "qcom,pm7325-rpmh-regulators";
18 qcom,pmic-id = "b";
21 regulator-min-microvolt = <1856000>;
22 regulator-max-microvolt = <2040000>;
26 regulator-min-microvolt = <535000>;
27 regulator-max-microvolt = <1120000>;
31 regulator-min-microvolt = <1256000>;
32 regulator-max-microvolt = <1500000>;
36 regulator-min-microvolt = <825000>;
37 regulator-max-microvolt = <925000>;
41 regulator-min-microvolt = <2700000>;
42 regulator-max-microvolt = <3544000>;
46 regulator-min-microvolt = <1140000>;
47 regulator-max-microvolt = <1260000>;
51 regulator-min-microvolt = <2960000>;
52 regulator-max-microvolt = <2960000>;
56 regulator-min-microvolt = <870000>;
57 regulator-max-microvolt = <970000>;
61 regulator-min-microvolt = <1080000>;
62 regulator-max-microvolt = <1304000>;
66 regulator-min-microvolt = <1504000>;
67 regulator-max-microvolt = <2000000>;
71 regulator-min-microvolt = <751000>;
72 regulator-max-microvolt = <824000>;
76 regulator-min-microvolt = <530000>;
77 regulator-max-microvolt = <824000>;
81 regulator-min-microvolt = <1080000>;
82 regulator-max-microvolt = <1304000>;
86 regulator-min-microvolt = <765000>;
87 regulator-max-microvolt = <1020000>;
91 regulator-min-microvolt = <1100000>;
92 regulator-max-microvolt = <1300000>;
96 regulator-min-microvolt = <1700000>;
97 regulator-max-microvolt = <1900000>;
101 regulator-min-microvolt = <1800000>;
102 regulator-max-microvolt = <2000000>;
106 regulator-min-microvolt = <1800000>;
107 regulator-max-microvolt = <1800000>;
111 pm8350c-regulators {
112 compatible = "qcom,pm8350c-rpmh-regulators";
113 qcom,pmic-id = "c";
116 regulator-min-microvolt = <2190000>;
117 regulator-max-microvolt = <2210000>;
121 regulator-min-microvolt = <1010000>;
122 regulator-max-microvolt = <1170000>;
126 regulator-min-microvolt = <1800000>;
127 regulator-max-microvolt = <1980000>;
131 regulator-min-microvolt = <1620000>;
132 regulator-max-microvolt = <1980000>;
136 regulator-min-microvolt = <2800000>;
137 regulator-max-microvolt = <3540000>;
141 regulator-min-microvolt = <1620000>;
142 regulator-max-microvolt = <3300000>;
146 regulator-min-microvolt = <1620000>;
147 regulator-max-microvolt = <3300000>;
151 regulator-min-microvolt = <1800000>;
152 regulator-max-microvolt = <2950000>;
156 regulator-min-microvolt = <3000000>;
157 regulator-max-microvolt = <3544000>;
161 regulator-min-microvolt = <1620000>;
162 regulator-max-microvolt = <2000000>;
166 regulator-min-microvolt = <2960000>;
167 regulator-max-microvolt = <2960000>;
171 regulator-min-microvolt = <720000>;
172 regulator-max-microvolt = <1050000>;
176 regulator-min-microvolt = <2800000>;
177 regulator-max-microvolt = <3544000>;
181 regulator-min-microvolt = <1650000>;
182 regulator-max-microvolt = <2000000>;
186 regulator-min-microvolt = <2700000>;
187 regulator-max-microvolt = <3544000>;
191 regulator-min-microvolt = <3008000>;
192 regulator-max-microvolt = <3960000>;
199 modem-init;
206 qcom,pre-scaling = <1 1>;
217 pinctrl-names = "default", "sleep";
218 pinctrl-0 = <&sdc1_on>;
219 pinctrl-1 = <&sdc1_off>;
221 non-removable;
222 no-sd;
223 no-sdio;
225 vmmc-supply = <&vreg_l7b_2p9>;
226 vqmmc-supply = <&vreg_l19b_1p8>;
232 pinctrl-names = "default", "sleep";
233 pinctrl-0 = <&sdc2_on>;
234 pinctrl-1 = <&sdc2_off>;
236 vmmc-supply = <&vreg_l9c_2p9>;
237 vqmmc-supply = <&vreg_l6c_2p9>;
239 cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
257 vdda-pll-supply = <&vreg_l10c_0p8>;
258 vdda33-supply = <&vreg_l2b_3p0>;
259 vdda18-supply = <&vreg_l1c_1p8>;
265 vdda-phy-supply = <&vreg_l6b_1p2>;
266 vdda-pll-supply = <&vreg_l1b_0p8>;
280 vdda-pll-supply = <&vreg_l10c_0p8>;
281 vdda33-supply = <&vreg_l2b_3p0>;
282 vdda18-supply = <&vreg_l1c_1p8>;
285 /* PINCTRL - additions to nodes defined in sc7280.dtsi */
290 drive-strength = <2>;
291 bias-disable;
296 drive-strength = <2>;
297 bias-pull-up;
303 bias-disable;
304 drive-strength = <16>;
308 bias-pull-up;
309 drive-strength = <10>;
313 bias-pull-up;
314 drive-strength = <10>;
318 bias-pull-down;
324 bias-disable;
325 drive-strength = <16>;
329 bias-pull-up;
330 drive-strength = <10>;
334 bias-pull-up;
335 drive-strength = <10>;
338 sd-cd {
339 bias-pull-up;