Lines Matching +full:dual +full:- +full:dsi +full:- +full:mode
1 // SPDX-License-Identifier: BSD-3-Clause
6 /dts-v1/;
8 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
9 #include <dt-bindings/sound/qcom,q6afe.h>
10 #include <dt-bindings/sound/qcom,q6asm.h>
18 compatible = "qcom,qrb5165-rb5", "qcom,sm8250";
26 stdout-path = "serial0:115200n8";
31 compatible = "fixed-clock";
32 #clock-cells = <0>;
33 clock-frequency = <40000000>;
36 dc12v: dc12v-regulator {
37 compatible = "regulator-fixed";
38 regulator-name = "DC12V";
39 regulator-min-microvolt = <12000000>;
40 regulator-max-microvolt = <12000000>;
41 regulator-always-on;
44 hdmi-out {
45 compatible = "hdmi-connector";
50 remote-endpoint = <<9611_out>;
56 compatible = "gpio-leds";
61 linux,default-trigger = "panic-indicator";
62 default-state = "off";
68 linux,default-trigger = "phy0tx";
69 default-state = "off";
75 linux,default-trigger = "bluetooth-power";
76 default-state = "off";
81 lt9611_1v2: lt9611-vdd12-regulator {
82 compatible = "regulator-fixed";
83 regulator-name = "LT9611_1V2";
85 vin-supply = <&vdc_3v3>;
86 regulator-min-microvolt = <1200000>;
87 regulator-max-microvolt = <1200000>;
90 lt9611_3v3: lt9611-3v3 {
91 compatible = "regulator-fixed";
92 regulator-name = "LT9611_3V3";
94 vin-supply = <&vdc_3v3>;
95 regulator-min-microvolt = <3300000>;
96 regulator-max-microvolt = <3300000>;
97 regulator-boot-on;
98 regulator-always-on;
101 thermal-zones {
102 conn-thermal {
103 polling-delay-passive = <0>;
104 polling-delay = <0>;
105 thermal-sensors = <&pm8150b_adc_tm 0>;
108 active-config0 {
116 pm8150l-thermal {
117 polling-delay-passive = <0>;
118 polling-delay = <0>;
119 thermal-sensors = <&pm8150l_adc_tm 1>;
122 active-config0 {
130 skin-msm-thermal {
131 polling-delay-passive = <0>;
132 polling-delay = <0>;
133 thermal-sensors = <&pm8150l_adc_tm 0>;
136 active-config0 {
144 wifi-thermal {
145 polling-delay-passive = <0>;
146 polling-delay = <0>;
147 thermal-sensors = <&pm8150_adc_tm 1>;
150 active-config0 {
158 xo-thermal {
159 polling-delay-passive = <0>;
160 polling-delay = <0>;
161 thermal-sensors = <&pm8150_adc_tm 0>;
164 active-config0 {
173 vbat: vbat-regulator {
174 compatible = "regulator-fixed";
175 regulator-name = "VBAT";
176 vin-supply = <&vreg_l11c_3p3>;
177 regulator-min-microvolt = <4200000>;
178 regulator-max-microvolt = <4200000>;
179 regulator-always-on;
182 vbat_som: vbat-som-regulator {
183 compatible = "regulator-fixed";
184 regulator-name = "VBAT_SOM";
185 vin-supply = <&dc12v>;
186 regulator-min-microvolt = <4200000>;
187 regulator-max-microvolt = <4200000>;
188 regulator-always-on;
191 vdc_3v3: vdc-3v3-regulator {
192 compatible = "regulator-fixed";
193 regulator-name = "VDC_3V3";
194 vin-supply = <&vreg_l11c_3p3>;
195 regulator-min-microvolt = <3300000>;
196 regulator-max-microvolt = <3300000>;
197 regulator-always-on;
200 vdc_5v: vdc-5v-regulator {
201 compatible = "regulator-fixed";
202 regulator-name = "VDC_5V";
204 regulator-min-microvolt = <5000000>;
205 regulator-max-microvolt = <5000000>;
206 regulator-always-on;
207 vin-supply = <&vreg_l11c_3p3>;
210 vph_pwr: vph-pwr-regulator {
211 compatible = "regulator-fixed";
212 regulator-name = "vph_pwr";
213 regulator-min-microvolt = <3700000>;
214 regulator-max-microvolt = <3700000>;
215 regulator-always-on;
218 vreg_s4a_1p8: vreg-s4a-1p8 {
219 compatible = "regulator-fixed";
220 regulator-name = "vreg_s4a_1p8";
221 regulator-min-microvolt = <1800000>;
222 regulator-max-microvolt = <1800000>;
223 regulator-always-on;
229 firmware-name = "qcom/sm8250/adsp.mbn";
233 pm8009-rpmh-regulators {
234 compatible = "qcom,pm8009-1-rpmh-regulators";
235 qcom,pmic-id = "f";
237 vdd-s1-supply = <&vph_pwr>;
238 vdd-s2-supply = <&vph_pwr>;
239 vdd-l2-supply = <&vreg_s8c_1p3>;
240 vdd-l5-l6-supply = <&vreg_bob>;
241 vdd-l7-supply = <&vreg_s4a_1p8>;
244 regulator-name = "vreg_s2f_0p95";
245 regulator-min-microvolt = <900000>;
246 regulator-max-microvolt = <952000>;
247 regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
251 regulator-name = "vreg_l1f_1p1";
252 regulator-min-microvolt = <1104000>;
253 regulator-max-microvolt = <1104000>;
254 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
258 regulator-name = "vreg_l2f_1p2";
259 regulator-min-microvolt = <1200000>;
260 regulator-max-microvolt = <1200000>;
261 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
265 regulator-name = "vreg_l6f_2p8";
266 regulator-min-microvolt = <2800000>;
267 regulator-max-microvolt = <2800000>;
268 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
272 regulator-name = "vreg_l7f_1p8";
273 regulator-min-microvolt = <1800000>;
274 regulator-max-microvolt = <1800000>;
275 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
279 pm8150-rpmh-regulators {
280 compatible = "qcom,pm8150-rpmh-regulators";
281 qcom,pmic-id = "a";
283 vdd-s1-supply = <&vph_pwr>;
284 vdd-s2-supply = <&vph_pwr>;
285 vdd-s3-supply = <&vph_pwr>;
286 vdd-s4-supply = <&vph_pwr>;
287 vdd-s5-supply = <&vph_pwr>;
288 vdd-s6-supply = <&vph_pwr>;
289 vdd-s7-supply = <&vph_pwr>;
290 vdd-s8-supply = <&vph_pwr>;
291 vdd-s9-supply = <&vph_pwr>;
292 vdd-s10-supply = <&vph_pwr>;
293 vdd-l2-l10-supply = <&vreg_bob>;
294 vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>;
295 vdd-l6-l9-supply = <&vreg_s8c_1p3>;
296 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
297 vdd-l13-l16-l17-supply = <&vreg_bob>;
300 regulator-name = "vreg_l2a_3p1";
301 regulator-min-microvolt = <3072000>;
302 regulator-max-microvolt = <3072000>;
303 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
307 regulator-name = "vreg_l3a_0p9";
308 regulator-min-microvolt = <928000>;
309 regulator-max-microvolt = <932000>;
310 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
314 regulator-name = "vreg_l5a_0p88";
315 regulator-min-microvolt = <880000>;
316 regulator-max-microvolt = <880000>;
317 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
321 regulator-name = "vreg_l6a_1p2";
322 regulator-min-microvolt = <1200000>;
323 regulator-max-microvolt = <1200000>;
324 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
328 regulator-name = "vreg_l7a_1p7";
329 regulator-min-microvolt = <1704000>;
330 regulator-max-microvolt = <1800000>;
331 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
335 regulator-name = "vreg_l9a_1p2";
336 regulator-min-microvolt = <1200000>;
337 regulator-max-microvolt = <1200000>;
338 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
342 regulator-name = "vreg_l10a_1p8";
343 regulator-min-microvolt = <1800000>;
344 regulator-max-microvolt = <1800000>;
345 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
349 regulator-name = "vreg_l12a_1p8";
350 regulator-min-microvolt = <1800000>;
351 regulator-max-microvolt = <1800000>;
352 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
356 regulator-name = "vreg_l13a_ts_3p0";
357 regulator-min-microvolt = <3008000>;
358 regulator-max-microvolt = <3008000>;
359 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
363 regulator-name = "vreg_l14a_1p8";
364 regulator-min-microvolt = <1800000>;
365 regulator-max-microvolt = <1880000>;
366 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
370 regulator-name = "vreg_l15a_1p8";
371 regulator-min-microvolt = <1800000>;
372 regulator-max-microvolt = <1800000>;
373 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
377 regulator-name = "vreg_l16a_2p7";
378 regulator-min-microvolt = <2704000>;
379 regulator-max-microvolt = <2960000>;
380 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
384 regulator-name = "vreg_l17a_3p0";
385 regulator-min-microvolt = <2856000>;
386 regulator-max-microvolt = <3008000>;
387 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
391 regulator-name = "vreg_l18a_0p92";
392 regulator-min-microvolt = <800000>;
393 regulator-max-microvolt = <912000>;
394 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
398 regulator-name = "vreg_s5a_1p9";
399 regulator-min-microvolt = <1904000>;
400 regulator-max-microvolt = <2000000>;
401 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
405 regulator-name = "vreg_s6a_0p95";
406 regulator-min-microvolt = <920000>;
407 regulator-max-microvolt = <1128000>;
408 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
412 pm8150l-rpmh-regulators {
413 compatible = "qcom,pm8150l-rpmh-regulators";
414 qcom,pmic-id = "c";
416 vdd-s1-supply = <&vph_pwr>;
417 vdd-s2-supply = <&vph_pwr>;
418 vdd-s3-supply = <&vph_pwr>;
419 vdd-s4-supply = <&vph_pwr>;
420 vdd-s5-supply = <&vph_pwr>;
421 vdd-s6-supply = <&vph_pwr>;
422 vdd-s7-supply = <&vph_pwr>;
423 vdd-s8-supply = <&vph_pwr>;
424 vdd-l1-l8-supply = <&vreg_s4a_1p8>;
425 vdd-l2-l3-supply = <&vreg_s8c_1p3>;
426 vdd-l4-l5-l6-supply = <&vreg_bob>;
427 vdd-l7-l11-supply = <&vreg_bob>;
428 vdd-l9-l10-supply = <&vreg_bob>;
429 vdd-bob-supply = <&vph_pwr>;
432 regulator-name = "vreg_bob";
433 regulator-min-microvolt = <3008000>;
434 regulator-max-microvolt = <4000000>;
435 regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
439 regulator-name = "vreg_l1c_1p8";
440 regulator-min-microvolt = <1800000>;
441 regulator-max-microvolt = <1800000>;
442 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
446 regulator-name = "vreg_l2c_1p2";
447 regulator-min-microvolt = <1200000>;
448 regulator-max-microvolt = <1200000>;
449 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
453 regulator-name = "vreg_l3c_0p8";
454 regulator-min-microvolt = <800000>;
455 regulator-max-microvolt = <800000>;
456 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
460 regulator-name = "vreg_l4c_1p7";
461 regulator-min-microvolt = <1704000>;
462 regulator-max-microvolt = <2928000>;
463 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
467 regulator-name = "vreg_l5c_1p8";
468 regulator-min-microvolt = <1800000>;
469 regulator-max-microvolt = <2928000>;
470 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
474 regulator-name = "vreg_l6c_2p96";
475 regulator-min-microvolt = <1800000>;
476 regulator-max-microvolt = <2960000>;
477 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
481 regulator-name = "vreg_l7c_cam_vcm0_2p85";
482 regulator-min-microvolt = <2856000>;
483 regulator-max-microvolt = <3104000>;
484 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
488 regulator-name = "vreg_l8c_1p8";
489 regulator-min-microvolt = <1800000>;
490 regulator-max-microvolt = <1800000>;
491 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
495 regulator-name = "vreg_l9c_2p96";
496 regulator-min-microvolt = <2704000>;
497 regulator-max-microvolt = <2960000>;
498 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
502 regulator-name = "vreg_l10c_3p0";
503 regulator-min-microvolt = <3000000>;
504 regulator-max-microvolt = <3000000>;
505 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
509 regulator-name = "vreg_l11c_3p3";
510 regulator-min-microvolt = <3296000>;
511 regulator-max-microvolt = <3296000>;
512 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
513 regulator-always-on;
517 regulator-name = "vreg_s8c_1p3";
518 regulator-min-microvolt = <1352000>;
519 regulator-max-microvolt = <1352000>;
520 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
527 firmware-name = "qcom/sm8250/cdsp.mbn";
532 vdda-supply = <&vreg_l9a_1p2>;
535 qcom,dual-dsi-mode;
536 qcom,master-dsi;
542 remote-endpoint = <<9611_a>;
543 data-lanes = <0 1 2 3>;
551 vdds-supply = <&vreg_l5a_0p88>;
561 zap-shader {
562 memory-region = <&gpu_mem>;
563 firmware-name = "qcom/sm8250/a650_zap.mbn";
567 /* LS-I2C0 */
574 clock-frequency = <400000>;
576 lt9611_codec: hdmi-bridge@2b {
579 #sound-dai-cells = <1>;
581 interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_FALLING>;
583 reset-gpios = <&pm8150l_gpios 5 GPIO_ACTIVE_HIGH>;
585 vdd-supply = <<9611_1v2>;
586 vcc-supply = <<9611_3v3>;
588 pinctrl-names = "default";
589 pinctrl-0 = <<9611_irq_pin <9611_rst_pin>;
592 #address-cells = <1>;
593 #size-cells = <0>;
599 remote-endpoint = <&dsi0_out>;
608 remote-endpoint = <&dsi1_out>;
617 remote-endpoint = <&hdmi_con>;
625 /* LS-I2C1 */
639 xo-therm@4c {
642 qcom,hw-settle-time = <200>;
645 wifi-therm@4e {
648 qcom,hw-settle-time = <200>;
655 xo-therm@0 {
657 io-channels = <&pm8150_adc ADC5_XO_THERM_100K_PU>;
659 qcom,hw-settle-time-us = <200>;
662 wifi-therm@1 {
664 io-channels = <&pm8150_adc ADC5_AMUX_THM2_100K_PU>;
666 qcom,hw-settle-time-us = <200>;
676 vdda-phy-supply = <&vreg_l5a_0p88>;
677 vdda-pll-supply = <&vreg_l9a_1p2>;
686 vdda-phy-supply = <&vreg_l5a_0p88>;
687 vdda-pll-supply = <&vreg_l9a_1p2>;
696 vdda-phy-supply = <&vreg_l5a_0p88>;
697 vdda-pll-supply = <&vreg_l9a_1p2>;
701 gpio-reserved-ranges = <1 1>, <3 2>, <7 1>;
702 gpio-line-names =
705 "PM_GPIO-F",
716 conn-therm@4f {
719 qcom,hw-settle-time = <200>;
726 conn-therm@0 {
728 io-channels = <&pm8150b_adc ADC5_AMUX_THM3_100K_PU>;
730 qcom,hw-settle-time-us = <200>;
735 gpio-line-names =
751 skin-msm-therm@4e {
754 qcom,hw-settle-time = <200>;
757 pm8150l-therm@4f {
760 qcom,hw-settle-time = <200>;
767 skin-msm-therm@0 {
769 io-channels = <&pm8150l_adc ADC5_AMUX_THM2_100K_PU>;
771 qcom,hw-settle-time-us = <200>;
774 pm8150l-therm@1 {
776 io-channels = <&pm8150l_adc ADC5_AMUX_THM3_100K_PU>;
778 qcom,hw-settle-time-us = <200>;
783 gpio-line-names =
789 "PM_GPIO-A", /* PWM */
793 "PM_GPIO-B",
797 lt9611_rst_pin: lt9611-rst-pin {
801 output-high;
802 input-disable;
803 power-source = <0>;
832 qcom,sd-lines = <0 1 2 3>;
840 qcom,sd-lines = <0>;
860 pinctrl-names = "default";
861 pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
862 vmmc-supply = <&vreg_l9c_2p96>;
863 vqmmc-supply = <&vreg_l6c_2p96>;
864 cd-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
865 bus-width = <4>;
866 no-sdio;
867 no-emmc;
871 compatible = "qcom,qrb5165-rb5-sndcard";
872 pinctrl-0 = <&tert_mi2s_active>;
873 pinctrl-names = "default";
874 model = "Qualcomm-RB5-WSA8815-Speakers-DMIC0";
875 audio-routing =
878 "VA DMIC0", "vdd-micb",
879 "VA DMIC1", "vdd-micb",
884 mm1-dai-link {
885 link-name = "MultiMedia1";
887 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
891 mm2-dai-link {
892 link-name = "MultiMedia2";
894 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
898 mm3-dai-link {
899 link-name = "MultiMedia3";
901 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
905 hdmi-dai-link {
906 link-name = "HDMI Playback";
908 sound-dai = <&q6afedai TERTIARY_MI2S_RX>;
912 sound-dai = <&q6routing>;
916 sound-dai = <<9611_codec 0>;
920 dma-dai-link {
921 link-name = "WSA Playback";
923 sound-dai = <&q6afedai WSA_CODEC_DMA_RX_0>;
927 sound-dai = <&q6routing>;
931 sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>;
935 va-dai-link {
936 link-name = "VA Capture";
938 sound-dai = <&q6afedai VA_CODEC_DMA_TX_0>;
942 sound-dai = <&q6routing>;
946 sound-dai = <&vamacro 0>;
954 pinctrl-names = "default";
955 pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs_gpio>;
956 cs-gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
962 interrupts-extended = <&tlmm 15 IRQ_TYPE_LEVEL_LOW>;
963 spi-max-frequency = <10000000>;
964 vdd-supply = <&vdc_5v>;
965 xceiver-supply = <&vdc_5v>;
970 left_spkr: wsa8810-left{
973 powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_HIGH>;
974 #thermal-sensor-cells = <0>;
975 sound-name-prefix = "SpkrLeft";
976 #sound-dai-cells = <0>;
979 right_spkr: wsa8810-right{
982 powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_HIGH>;
983 #thermal-sensor-cells = <0>;
984 sound-name-prefix = "SpkrRight";
985 #sound-dai-cells = <0>;
990 gpio-reserved-ranges = <40 4>;
991 gpio-line-names =
992 "GPIO-MM",
993 "GPIO-NN",
994 "GPIO-OO",
995 "GPIO-PP",
996 "GPIO-A",
997 "GPIO-C",
998 "GPIO-E",
999 "GPIO-D",
1000 "I2C0-SDA",
1001 "I2C0-SCL",
1002 "GPIO-TT", /* GPIO_10 */
1006 "GPIO-X",
1014 "GPIO-AAA",
1015 "GPIO-BBB",
1016 "GPIO-CCC",
1017 "GPIO-Z",
1018 "GPIO-DDD",
1019 "GPIO-BB",
1024 "GPIO-UU",
1038 "GPIO-F",
1039 "GPIO-JJ",
1048 "GPIO-QQ",
1049 "GPIO-RR",
1056 "GPIO-AA",
1058 "GPIO-G",
1059 "GPIO-LL",
1070 "GPIO-II",
1074 "GPIO-CC",
1075 "GPIO-DD",
1076 "GPIO-EE",
1077 "GPIO-FF",
1078 "GPIO-GG",
1079 "GPIO-HH",
1080 "GPIO-VV",
1081 "GPIO-WW",
1084 "GPIO-K",
1085 "GPIO-I",
1090 "GPIO-AA", /* CSI4_MCLK */
1091 "GPIO-BB", /* CSI5_MCLK */
1092 "GPIO-KK", /* GPIO_100 */
1101 "GPIO-L",
1106 "GPIO-J",
1107 "GPIO-YY",
1108 "GPIO-H",
1109 "GPIO-ZZ",
1117 "GPIO-M",
1118 "GPIO-N",
1119 "GPIO-O",
1120 "GPIO-P",
1128 "GPIO-B",
1136 "GPIO-U",
1137 "GPIO-Y",
1138 "GPIO-R",
1139 "GPIO-Q",
1140 "GPIO-S",
1141 "GPIO-T",
1142 "GPIO-V", /* GPIO_150 */
1143 "GPIO-W",
1162 "GPIO-SS", /* GPIO_170 */
1163 "GPIO-XX",
1173 lt9611_irq_pin: lt9611-irq {
1176 bias-disable;
1179 sdc2_default_state: sdc2-default {
1182 bias-disable;
1183 drive-strength = <16>;
1188 bias-pull-up;
1189 drive-strength = <10>;
1194 bias-pull-up;
1195 drive-strength = <10>;
1199 sdc2_card_det_n: sd-card-det-n {
1202 bias-pull-up;
1213 vcc-supply = <&vreg_l17a_3p0>;
1214 vcc-max-microamp = <800000>;
1215 vccq-supply = <&vreg_l6a_1p2>;
1216 vccq-max-microamp = <800000>;
1217 vccq2-supply = <&vreg_s4a_1p8>;
1218 vccq2-max-microamp = <800000>;
1224 vdda-phy-supply = <&vreg_l5a_0p88>;
1225 vdda-max-microamp = <89900>;
1226 vdda-pll-supply = <&vreg_l9a_1p2>;
1227 vdda-pll-max-microamp = <18800>;
1241 vdda-pll-supply = <&vreg_l5a_0p88>;
1242 vdda33-supply = <&vreg_l2a_3p1>;
1243 vdda18-supply = <&vreg_l12a_1p8>;
1249 vdda-phy-supply = <&vreg_l9a_1p2>;
1250 vdda-pll-supply = <&vreg_l18a_0p92>;
1264 vdda-pll-supply = <&vreg_l5a_0p88>;
1265 vdda33-supply = <&vreg_l2a_3p1>;
1266 vdda18-supply = <&vreg_l12a_1p8>;
1272 vdda-phy-supply = <&vreg_l9a_1p2>;
1273 vdda-pll-supply = <&vreg_l18a_0p92>;
1277 pinctrl-0 = <&dmic01_active>;
1278 pinctrl-names = "default";
1279 vdd-micb-supply = <&vreg_s4a_1p8>;
1280 qcom,dmic-sample-rate = <600000>;
1287 /* PINCTRL - additions to nodes defined in sm8250.dtsi */
1289 drive-strength = <6>;
1290 bias-disable;
1294 drive-strength = <6>;
1295 bias-disable;