Lines Matching +full:eee +full:- +full:broken +full:- +full:1000 +full:t
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
12 compatible = "fsl,imx8mp-evk", "fsl,imx8mp";
15 stdout-path = &uart2;
18 gpio-leds {
19 compatible = "gpio-leds";
20 pinctrl-names = "default";
21 pinctrl-0 = <&pinctrl_gpio_led>;
26 default-state = "on";
36 reg_can1_stby: regulator-can1-stby {
37 compatible = "regulator-fixed";
38 regulator-name = "can1-stby";
39 pinctrl-names = "default";
40 pinctrl-0 = <&pinctrl_flexcan1_reg>;
41 regulator-min-microvolt = <3300000>;
42 regulator-max-microvolt = <3300000>;
44 enable-active-high;
47 reg_can2_stby: regulator-can2-stby {
48 compatible = "regulator-fixed";
49 regulator-name = "can2-stby";
50 pinctrl-names = "default";
51 pinctrl-0 = <&pinctrl_flexcan2_reg>;
52 regulator-min-microvolt = <3300000>;
53 regulator-max-microvolt = <3300000>;
55 enable-active-high;
58 reg_usdhc2_vmmc: regulator-usdhc2 {
59 compatible = "regulator-fixed";
60 pinctrl-names = "default";
61 pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
62 regulator-name = "VSD_3V3";
63 regulator-min-microvolt = <3300000>;
64 regulator-max-microvolt = <3300000>;
66 enable-active-high;
71 pinctrl-names = "default";
72 pinctrl-0 = <&pinctrl_flexcan1>;
73 xceiver-supply = <®_can1_stby>;
78 pinctrl-names = "default";
79 pinctrl-0 = <&pinctrl_flexcan2>;
80 xceiver-supply = <®_can2_stby>;
85 pinctrl-names = "default";
86 pinctrl-0 = <&pinctrl_eqos>;
87 phy-mode = "rgmii-id";
88 phy-handle = <ðphy0>;
92 compatible = "snps,dwmac-mdio";
93 #address-cells = <1>;
94 #size-cells = <0>;
96 ethphy0: ethernet-phy@1 {
97 compatible = "ethernet-phy-ieee802.3-c22";
99 eee-broken-1000t;
105 pinctrl-names = "default";
106 pinctrl-0 = <&pinctrl_fec>;
107 phy-mode = "rgmii-id";
108 phy-handle = <ðphy1>;
109 fsl,magic-packet;
113 #address-cells = <1>;
114 #size-cells = <0>;
116 ethphy1: ethernet-phy@1 {
117 compatible = "ethernet-phy-ieee802.3-c22";
119 eee-broken-1000t;
120 reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
121 reset-assert-us = <10000>;
122 reset-deassert-us = <80000>;
128 clock-frequency = <400000>;
129 pinctrl-names = "default";
130 pinctrl-0 = <&pinctrl_i2c1>;
136 pinctrl-names = "default";
137 pinctrl-0 = <&pinctrl_pmic>;
138 interrupt-parent = <&gpio1>;
143 regulator-name = "BUCK1";
144 regulator-min-microvolt = <720000>;
145 regulator-max-microvolt = <1000000>;
146 regulator-boot-on;
147 regulator-always-on;
148 regulator-ramp-delay = <3125>;
152 regulator-name = "BUCK2";
153 regulator-min-microvolt = <720000>;
154 regulator-max-microvolt = <1025000>;
155 regulator-boot-on;
156 regulator-always-on;
157 regulator-ramp-delay = <3125>;
158 nxp,dvs-run-voltage = <950000>;
159 nxp,dvs-standby-voltage = <850000>;
163 regulator-name = "BUCK4";
164 regulator-min-microvolt = <3000000>;
165 regulator-max-microvolt = <3600000>;
166 regulator-boot-on;
167 regulator-always-on;
171 regulator-name = "BUCK5";
172 regulator-min-microvolt = <1650000>;
173 regulator-max-microvolt = <1950000>;
174 regulator-boot-on;
175 regulator-always-on;
179 regulator-name = "BUCK6";
180 regulator-min-microvolt = <1045000>;
181 regulator-max-microvolt = <1155000>;
182 regulator-boot-on;
183 regulator-always-on;
187 regulator-name = "LDO1";
188 regulator-min-microvolt = <1650000>;
189 regulator-max-microvolt = <1950000>;
190 regulator-boot-on;
191 regulator-always-on;
195 regulator-name = "LDO3";
196 regulator-min-microvolt = <1710000>;
197 regulator-max-microvolt = <1890000>;
198 regulator-boot-on;
199 regulator-always-on;
203 regulator-name = "LDO5";
204 regulator-min-microvolt = <1800000>;
205 regulator-max-microvolt = <3300000>;
206 regulator-boot-on;
207 regulator-always-on;
214 clock-frequency = <400000>;
215 pinctrl-names = "default";
216 pinctrl-0 = <&pinctrl_i2c3>;
222 gpio-controller;
223 #gpio-cells = <2>;
233 pinctrl-names = "default";
234 pinctrl-0 = <&pinctrl_uart2>;
247 pinctrl-names = "default";
248 pinctrl-0 = <&pinctrl_usb1_vbus>;
254 assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
255 assigned-clock-rates = <400000000>;
256 pinctrl-names = "default", "state_100mhz", "state_200mhz";
257 pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
258 pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
259 pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
260 cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
261 vmmc-supply = <®_usdhc2_vmmc>;
262 bus-width = <4>;
267 assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
268 assigned-clock-rates = <400000000>;
269 pinctrl-names = "default", "state_100mhz", "state_200mhz";
270 pinctrl-0 = <&pinctrl_usdhc3>;
271 pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
272 pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
273 bus-width = <8>;
274 non-removable;
279 pinctrl-names = "default";
280 pinctrl-0 = <&pinctrl_wdog>;
281 fsl,ext-reset-output;
409 pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
421 pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
455 pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
471 pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {