Lines Matching +full:max +full:- +full:bitrate
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
11 /dts-v1/;
12 #include "fsl-ls1028a.dtsi"
16 compatible = "fsl,ls1028a-rdb", "fsl,ls1028a";
28 stdout-path = "serial0:115200n8";
36 sys_mclk: clock-mclk {
37 compatible = "fixed-clock";
38 #clock-cells = <0>;
39 clock-frequency = <25000000>;
42 reg_1p8v: regulator-1p8v {
43 compatible = "regulator-fixed";
44 regulator-name = "1P8V";
45 regulator-min-microvolt = <1800000>;
46 regulator-max-microvolt = <1800000>;
47 regulator-always-on;
50 sb_3v3: regulator-sb3v3 {
51 compatible = "regulator-fixed";
52 regulator-name = "3v3_vbus";
53 regulator-min-microvolt = <3300000>;
54 regulator-max-microvolt = <3300000>;
55 regulator-boot-on;
56 regulator-always-on;
60 compatible = "simple-audio-card";
61 simple-audio-card,format = "i2s";
62 simple-audio-card,widgets =
67 simple-audio-card,routing =
74 simple-audio-card,cpu {
75 sound-dai = <&sai4>;
76 frame-master;
77 bitclock-master;
80 simple-audio-card,codec {
81 sound-dai = <&sgtl5000>;
82 frame-master;
83 bitclock-master;
84 system-clock-frequency = <25000000>;
92 can-transceiver {
93 max-bitrate = <5000000>;
100 can-transceiver {
101 max-bitrate = <5000000>;
106 sd-uhs-sdr104;
107 sd-uhs-sdr50;
108 sd-uhs-sdr25;
109 sd-uhs-sdr12;
114 mmc-hs200-1_8v;
115 mmc-hs400-1_8v;
116 bus-width = <8>;
124 compatible = "jedec,spi-nor";
125 #address-cells = <1>;
126 #size-cells = <1>;
127 spi-max-frequency = <50000000>;
128 /* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */
129 spi-rx-bus-width = <8>; /* 8 SPI Rx lines */
130 spi-tx-bus-width = <1>; /* 1 SPI Tx line */
138 i2c-mux@77 {
141 #address-cells = <1>;
142 #size-cells = <0>;
145 #address-cells = <1>;
146 #size-cells = <0>;
149 sgtl5000: audio-codec@a {
150 #sound-dai-cells = <0>;
153 VDDA-supply = <®_1p8v>;
154 VDDIO-supply = <®_1p8v>;
156 sclk-strength = <3>;
161 #address-cells = <1>;
162 #size-cells = <0>;
165 current-monitor@40 {
168 shunt-resistor = <500>;
173 #address-cells = <1>;
174 #size-cells = <0>;
177 temperature-sensor@4c {
180 vcc-supply = <&sb_3v3>;
201 qsgmii_phy0: ethernet-phy@10 {
205 qsgmii_phy1: ethernet-phy@11 {
209 qsgmii_phy2: ethernet-phy@12 {
213 qsgmii_phy3: ethernet-phy@13 {
219 phy-handle = <&sgmii_phy0>;
220 phy-connection-type = "sgmii";
221 managed = "in-band-status";
225 #address-cells = <1>;
226 #size-cells = <0>;
227 sgmii_phy0: ethernet-phy@2 {
243 managed = "in-band-status";
244 phy-handle = <&qsgmii_phy0>;
245 phy-mode = "qsgmii";
251 managed = "in-band-status";
252 phy-handle = <&qsgmii_phy1>;
253 phy-mode = "qsgmii";
259 managed = "in-band-status";
260 phy-handle = <&qsgmii_phy2>;
261 phy-mode = "qsgmii";
267 managed = "in-band-status";
268 phy-handle = <&qsgmii_phy3>;
269 phy-mode = "qsgmii";