Lines Matching +full:rk3288 +full:- +full:mali
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
7 #include <dt-bindings/input/input.h>
8 #include "rk3288.dtsi"
12 compatible = "mqmaker,miqi", "rockchip,rk3288";
15 stdout-path = "serial2:115200n8";
23 ext_gmac: external-gmac-clock {
24 compatible = "fixed-clock";
25 #clock-cells = <0>;
26 clock-frequency = <125000000>;
27 clock-output-names = "ext_gmac";
31 compatible = "gpio-leds";
33 work_led: led-0 {
36 linux,default-trigger = "timer";
40 vcc_flash: flash-regulator {
41 compatible = "regulator-fixed";
42 regulator-name = "vcc_flash";
43 regulator-min-microvolt = <1800000>;
44 regulator-max-microvolt = <1800000>;
45 vin-supply = <&vcc_io>;
48 vcc_host: usb-host-regulator {
49 compatible = "regulator-fixed";
50 enable-active-high;
52 pinctrl-names = "default";
53 pinctrl-0 = <&host_vbus_drv>;
54 regulator-name = "vcc_host";
55 regulator-min-microvolt = <5000000>;
56 regulator-max-microvolt = <5000000>;
57 regulator-always-on;
58 vin-supply = <&vcc_sys>;
61 vcc_sd: sdmmc-regulator {
62 compatible = "regulator-fixed";
64 pinctrl-names = "default";
65 pinctrl-0 = <&sdmmc_pwr>;
66 regulator-name = "vcc_sd";
67 regulator-min-microvolt = <3300000>;
68 regulator-max-microvolt = <3300000>;
69 startup-delay-us = <100000>;
70 vin-supply = <&vcc_io>;
73 vcc_sys: vsys-regulator {
74 compatible = "regulator-fixed";
75 regulator-name = "vcc_sys";
76 regulator-min-microvolt = <5000000>;
77 regulator-max-microvolt = <5000000>;
78 regulator-always-on;
79 regulator-boot-on;
84 cpu-supply = <&vdd_cpu>;
88 cpu-supply = <&vdd_cpu>;
92 cpu-supply = <&vdd_cpu>;
96 cpu-supply = <&vdd_cpu>;
100 bus-width = <8>;
101 cap-mmc-highspeed;
102 non-removable;
103 pinctrl-names = "default";
104 pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>;
105 vmmc-supply = <&vcc_io>;
106 vqmmc-supply = <&vcc_flash>;
111 assigned-clocks = <&cru SCLK_MAC>;
112 assigned-clock-parents = <&ext_gmac>;
114 pinctrl-names = "default";
115 pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
116 phy-supply = <&vcc_lan>;
117 phy-mode = "rgmii";
118 snps,reset-active-low;
119 snps,reset-delays-us = <0 10000 1000000>;
120 snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
127 mali-supply = <&vdd_gpu>;
132 ddc-i2c-bus = <&i2c5>;
137 clock-frequency = <400000>;
142 fcs,suspend-voltage-selector = <1>;
144 regulator-name = "vdd_cpu";
145 regulator-min-microvolt = <850000>;
146 regulator-max-microvolt = <1350000>;
147 regulator-always-on;
148 regulator-boot-on;
149 regulator-enable-ramp-delay = <300>;
150 regulator-ramp-delay = <8000>;
151 vin-supply = <&vcc_sys>;
156 fcs,suspend-voltage-selector = <1>;
158 regulator-name = "vdd_gpu";
159 regulator-min-microvolt = <850000>;
160 regulator-max-microvolt = <1350000>;
161 regulator-always-on;
162 vin-supply = <&vcc_sys>;
168 #clock-cells = <0>;
169 clock-frequency = <32768>;
170 clock-output-names = "xin32k";
174 compatible = "active-semi,act8846";
176 pinctrl-names = "default";
177 pinctrl-0 = <&pmic_vsel>;
178 system-power-controller;
180 vp1-supply = <&vcc_sys>;
181 vp2-supply = <&vcc_sys>;
182 vp3-supply = <&vcc_sys>;
183 vp4-supply = <&vcc_sys>;
184 inl1-supply = <&vcc_sys>;
185 inl2-supply = <&vcc_sys>;
186 inl3-supply = <&vcc_20>;
190 regulator-name = "vcc_ddr";
191 regulator-always-on;
195 regulator-name = "vcc_io";
196 regulator-min-microvolt = <3300000>;
197 regulator-max-microvolt = <3300000>;
198 regulator-always-on;
202 regulator-name = "vdd_log";
203 regulator-min-microvolt = <1100000>;
204 regulator-max-microvolt = <1100000>;
205 regulator-always-on;
209 regulator-name = "vcc_20";
210 regulator-min-microvolt = <2000000>;
211 regulator-max-microvolt = <2000000>;
212 regulator-always-on;
216 regulator-name = "vccio_sd";
217 regulator-min-microvolt = <3300000>;
218 regulator-max-microvolt = <3300000>;
219 regulator-always-on;
223 regulator-name = "vdd10_lcd";
224 regulator-min-microvolt = <1000000>;
225 regulator-max-microvolt = <1000000>;
226 regulator-always-on;
230 regulator-name = "vcca_18";
231 regulator-min-microvolt = <1800000>;
232 regulator-max-microvolt = <1800000>;
236 regulator-name = "vcca_33";
237 regulator-min-microvolt = <3300000>;
238 regulator-max-microvolt = <3300000>;
242 regulator-name = "vcc_lan";
243 regulator-min-microvolt = <3300000>;
244 regulator-max-microvolt = <3300000>;
248 regulator-name = "vdd_10";
249 regulator-min-microvolt = <1000000>;
250 regulator-max-microvolt = <1000000>;
251 regulator-always-on;
255 regulator-name = "vcc_18";
256 regulator-min-microvolt = <1800000>;
257 regulator-max-microvolt = <1800000>;
258 regulator-always-on;
262 regulator-name = "vcc18_lcd";
263 regulator-min-microvolt = <1800000>;
264 regulator-max-microvolt = <1800000>;
265 regulator-always-on;
290 audio-supply = <&vcca_33>;
291 flash0-supply = <&vcc_flash>;
292 flash1-supply = <&vcc_lan>;
293 gpio30-supply = <&vcc_io>;
294 gpio1830-supply = <&vcc_io>;
295 lcdc-supply = <&vcc_io>;
296 sdcard-supply = <&vccio_sd>;
297 wifi-supply = <&vcc_18>;
301 pcfg_output_high: pcfg-output-high {
302 output-high;
305 pcfg_output_low: pcfg-output-low {
306 output-low;
309 pcfg_pull_up_drv_12ma: pcfg-pull-up-drv-12ma {
310 bias-pull-up;
311 drive-strength = <12>;
315 pmic_int: pmic-int {
319 pmic_sleep: pmic-sleep {
323 pmic_vsel: pmic-vsel {
329 phy_int: phy-int {
333 phy_pmeb: phy-pmeb {
337 phy_rst: phy-rst {
345 * high-speed mode on firefly board so bump up to 12ma.
347 sdmmc_bus4: sdmmc-bus4 {
354 sdmmc_clk: sdmmc-clk {
358 sdmmc_cmd: sdmmc-cmd {
362 sdmmc_pwr: sdmmc-pwr {
368 host_vbus_drv: host-vbus-drv {
375 vref-supply = <&vcc_18>;
380 bus-width = <4>;
381 cap-mmc-highspeed;
382 cap-sd-highspeed;
383 card-detect-delay = <200>;
384 disable-wp;
385 pinctrl-names = "default";
386 pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
387 vmmc-supply = <&vcc_sd>;
388 vqmmc-supply = <&vccio_sd>;
393 rockchip,hw-tshut-mode = <0>;
394 rockchip,hw-tshut-polarity = <0>;