Lines Matching +full:skew +full:- +full:delay
1 // SPDX-License-Identifier: GPL-2.0 OR X11
7 #include <dt-bindings/gpio/gpio.h>
8 #include <dt-bindings/input/input.h>
12 stdout-path = &uart2;
21 compatible = "simple-bus";
22 #address-cells = <1>;
23 #size-cells = <0>;
26 compatible = "regulator-fixed";
28 regulator-name = "2P5V";
29 regulator-min-microvolt = <2500000>;
30 regulator-max-microvolt = <2500000>;
31 regulator-always-on;
35 compatible = "regulator-fixed";
37 regulator-name = "3P3V";
38 regulator-min-microvolt = <3300000>;
39 regulator-max-microvolt = <3300000>;
40 regulator-always-on;
44 compatible = "regulator-fixed";
46 regulator-name = "usb_otg_vbus";
47 regulator-min-microvolt = <5000000>;
48 regulator-max-microvolt = <5000000>;
50 enable-active-high;
54 compatible = "regulator-fixed";
56 regulator-name = "CAN XCVR";
57 regulator-min-microvolt = <3300000>;
58 regulator-max-microvolt = <3300000>;
59 pinctrl-names = "default";
60 pinctrl-0 = <&pinctrl_can_xcvr>;
65 compatible = "regulator-fixed";
67 pinctrl-names = "default";
68 pinctrl-0 = <&pinctrl_wlan_vmmc>;
69 regulator-name = "reg_wlan_vmmc";
70 regulator-min-microvolt = <3300000>;
71 regulator-max-microvolt = <3300000>;
73 startup-delay-us = <70000>;
74 enable-active-high;
78 compatible = "regulator-fixed";
80 pinctrl-names = "default";
81 pinctrl-0 = <&pinctrl_usbh1>;
82 regulator-name = "usb_h1_vbus";
83 regulator-min-microvolt = <3300000>;
84 regulator-max-microvolt = <3300000>;
86 enable-active-high;
90 gpio-keys {
91 compatible = "gpio-keys";
92 pinctrl-names = "default";
93 pinctrl-0 = <&pinctrl_gpio_keys>;
99 wakeup-source;
120 volume-up {
126 volume-down {
134 compatible = "fsl,imx6q-nitrogen6x-sgtl5000",
135 "fsl,imx-audio-sgtl5000";
136 model = "imx6q-nitrogen6x-sgtl5000";
137 ssi-controller = <&ssi1>;
138 audio-codec = <&codec>;
139 audio-routing =
143 mux-int-port = <1>;
144 mux-ext-port = <3>;
147 backlight_lcd: backlight-lcd {
148 compatible = "pwm-backlight";
150 brightness-levels = <0 4 8 16 32 64 128 255>;
151 default-brightness-level = <7>;
152 power-supply = <®_3p3v>;
156 backlight_lvds: backlight-lvds {
157 compatible = "pwm-backlight";
159 brightness-levels = <0 4 8 16 32 64 128 255>;
160 default-brightness-level = <7>;
161 power-supply = <®_3p3v>;
166 compatible = "fsl,imx-parallel-display";
167 #address-cells = <1>;
168 #size-cells = <0>;
169 interface-pix-fmt = "bgr666";
170 pinctrl-names = "default";
171 pinctrl-0 = <&pinctrl_j15>;
178 remote-endpoint = <&ipu1_di0_disp0>;
186 remote-endpoint = <&lcd_panel_in>;
191 panel-lcd {
192 compatible = "okaya,rs800480t-7x0gp";
197 remote-endpoint = <&lcd_display_out>;
202 panel-lvds0 {
208 remote-endpoint = <&lvds0_out>;
215 pinctrl-names = "default";
216 pinctrl-0 = <&pinctrl_audmux>;
221 pinctrl-names = "default";
222 pinctrl-0 = <&pinctrl_can1>;
223 xceiver-supply = <®_can_xcvr>;
228 assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
230 assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
235 cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
236 pinctrl-names = "default";
237 pinctrl-0 = <&pinctrl_ecspi1>;
241 compatible = "sst,sst25vf016b", "jedec,spi-nor";
242 spi-max-frequency = <20000000>;
244 #address-cells = <1>;
245 #size-cells = <1>;
265 pinctrl-names = "default";
266 pinctrl-0 = <&pinctrl_enet>;
267 phy-mode = "rgmii";
268 phy-handle = <ðphy>;
269 phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
270 interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
272 fsl,err006687-workaround-present;
276 #address-cells = <1>;
277 #size-cells = <0>;
279 ethphy: ethernet-phy {
280 compatible = "ethernet-phy-ieee802.3-c22";
281 txen-skew-ps = <0>;
282 txc-skew-ps = <3000>;
283 rxdv-skew-ps = <0>;
284 rxc-skew-ps = <3000>;
285 rxd0-skew-ps = <0>;
286 rxd1-skew-ps = <0>;
287 rxd2-skew-ps = <0>;
288 rxd3-skew-ps = <0>;
289 txd0-skew-ps = <0>;
290 txd1-skew-ps = <0>;
291 txd2-skew-ps = <0>;
292 txd3-skew-ps = <0>;
298 ddc-i2c-bus = <&i2c2>;
303 clock-frequency = <100000>;
304 pinctrl-names = "default";
305 pinctrl-0 = <&pinctrl_i2c1>;
312 VDDA-supply = <®_2p5v>;
313 VDDIO-supply = <®_3p3v>;
323 clock-frequency = <100000>;
324 pinctrl-names = "default";
325 pinctrl-0 = <&pinctrl_i2c2>;
330 clock-frequency = <100000>;
331 pinctrl-names = "default";
332 pinctrl-0 = <&pinctrl_i2c3>;
338 interrupt-parent = <&gpio1>;
340 wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
344 compatible = "edt,edt-ft5x06";
346 interrupt-parent = <&gpio1>;
348 wakeup-source;
353 pinctrl-names = "default";
354 pinctrl-0 = <&pinctrl_hog>;
356 imx6q-nitrogen6x {
381 pinctrl_can_xcvr: can-xcvrgrp {
420 pinctrl_gpio_keys: gpio-keysgrp {
573 pinctrl_wlan_vmmc: wlan-vmmcgrp {
585 remote-endpoint = <&lcd_display_in>;
591 lvds-channel@0 {
598 remote-endpoint = <&panel_in>;
609 #pwm-cells = <2>;
610 pinctrl-names = "default";
611 pinctrl-0 = <&pinctrl_pwm1>;
616 pinctrl-names = "default";
617 pinctrl-0 = <&pinctrl_pwm3>;
622 #pwm-cells = <2>;
623 pinctrl-names = "default";
624 pinctrl-0 = <&pinctrl_pwm4>;
633 pinctrl-names = "default";
634 pinctrl-0 = <&pinctrl_uart1>;
639 pinctrl-names = "default";
640 pinctrl-0 = <&pinctrl_uart2>;
645 vbus-supply = <®_usb_h1_vbus>;
650 vbus-supply = <®_usb_otg_vbus>;
651 pinctrl-names = "default";
652 pinctrl-0 = <&pinctrl_usbotg>;
653 disable-over-current;
658 pinctrl-names = "default";
659 pinctrl-0 = <&pinctrl_usdhc2>;
660 bus-width = <4>;
661 non-removable;
662 vmmc-supply = <®_wlan_vmmc>;
663 cap-power-off-card;
664 keep-power-in-suspend;
667 #address-cells = <1>;
668 #size-cells = <0>;
672 interrupt-parent = <&gpio6>;
674 ref-clock-frequency = <38400000>;
679 pinctrl-names = "default";
680 pinctrl-0 = <&pinctrl_usdhc3>;
681 cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
682 vmmc-supply = <®_3p3v>;
687 pinctrl-names = "default";
688 pinctrl-0 = <&pinctrl_usdhc4>;
689 cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
690 vmmc-supply = <®_3p3v>;