Lines Matching +full:pwr +full:- +full:reg

1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3  * Device Tree file for D-Link DNS-327L
12 /dts-v1/;
14 #include <dt-bindings/input/input.h>
15 #include <dt-bindings/gpio/gpio.h>
16 #include "armada-370.dtsi"
19 	model = "D-Link DNS-327L";
22 		"marvell,armada-370-xp";
25 		stdout-path = &uart0;
30 		reg = <0x00000000 0x20000000>; /* 512 MiB */
38 		internal-regs {
40 				nr-ports = <2>;
50 	gpio-keys {
51 		compatible = "gpio-keys";
52 		pinctrl-0 = <
56 		pinctrl-names = "default";
58 		power-button {
64 		backup-button {
70 		reset-button {
77 	gpio-leds {
78 		compatible = "gpio-leds";
79 		pinctrl-0 = <
87 		pinctrl-names = "default";
89 		sata-r-amber-pin {
90 			label = "dns327l:amber:sata-r";
92 			default-state = "keep";
95 		sata-l-amber-pin {
96 			label = "dns327l:amber:sata-l";
98 			default-state = "keep";
101 		backup-led-pin {
104 			default-state = "keep";
109 		compatible = "simple-bus";
110 		#address-cells = <1>;
111 		#size-cells = <0>;
114 			compatible = "regulator-fixed";
115 			reg = <1>;
116 			pinctrl-0 = <&xhci_pwr_pin>;
117 			pinctrl-names = "default";
118 			regulator-name = "USB3.0 Port Power";
119 			regulator-min-microvolt = <5000000>;
120 			regulator-max-microvolt = <5000000>;
121 			enable-active-high;
122 			regulator-boot-on;
123 			regulator-always-on;
128 			compatible = "regulator-fixed";
129 			reg = <2>;
130 			pinctrl-0 = <&sata_r_pwr_pin>;
131 			pinctrl-names = "default";
132 			regulator-name = "SATA-R Power";
133 			regulator-min-microvolt = <5000000>;
134 			regulator-max-microvolt = <5000000>;
135 			startup-delay-us = <2000000>;
136 			enable-active-high;
137 			regulator-always-on;
138 			regulator-boot-on;
143 			compatible = "regulator-fixed";
144 			reg = <3>;
145 			pinctrl-0 = <&sata_l_pwr_pin>;
146 			pinctrl-names = "default";
147 			regulator-name = "SATA-L Power";
148 			regulator-min-microvolt = <5000000>;
149 			regulator-max-microvolt = <5000000>;
150 			startup-delay-us = <4000000>;
151 			enable-active-high;
152 			regulator-always-on;
153 			regulator-boot-on;
174 	sata_l_white_pin: sata-l-white-pin {
179 	sata_r_white_pin: sata-r-white-pin {
184 	sata_r_amber_pin: sata-r-amber-pin {
189 	sata_l_amber_pin: sata-l-amber-pin {
194 	backup_led_pin: backup-led-pin {
199 	xhci_pwr_pin: xhci-pwr-pin {
204 	sata_r_pwr_pin: sata-r-pwr-pin {
209 	sata_l_pwr_pin: sata-l-pwr-pin {
214 	uart1_pins: uart1-pins {
219 	power_button_pin: power-button-pin {
224 	backup_button_pin: backup-button-pin {
229 	reset_button_pin: reset-button-pin {
242 	pinctrl-0 = <&uart1_pins>;
243 	pinctrl-names = "default";
248 	phy0: ethernet-phy@0 { /* Marvell 88E1318 */
249 		reg = <0>;
250 		marvell,reg-init = <0x2 0x19 0x0 0x0077>,
257 	phy-mode = "rgmii-id";
262 	compatible = "marvell,mv64xxx-i2c";
263 	clock-frequency = <100000>;
271 		reg = <0>;
272 		label = "pxa3xx_nand-0";
273 		nand-rb = <0>;
274 		marvell,nand-keep-config;
275 		nand-on-flash-bbt;
276 		nand-ecc-strength = <4>;
277 		nand-ecc-step-size = <512>;
280 			compatible = "fixed-partitions";
281 			#address-cells = <1>;
282 			#size-cells = <1>;
285 				label = "u-boot";
287 				reg = <0x0000000 0x100000>;
288 				read-only;
292 				label = "u-boot-env";
294 				reg = <0x100000 0x20000>;
295 				read-only;
301 				reg = <0x120000 0x700000>;
307 				reg = <0x820000 0x54e0000>;
312 				label = "failsafe-uImage";
314 				reg = <0x5d00000 0x500000>;
318 				label = "failsafe-fs";
320 				reg = <0x6200000 0x1d00000>;
326 				reg = <0x7f00000 0x100000>;