Lines Matching full:feature

32 A feature is a named set of programming for a CoreSight device. The programming
36 The feature is defined using a descriptor. This descriptor is used to load onto
37 a matching device, either when the feature is loaded into the system, or when the
43 and efficient for the feature to be programmed onto the device when required.
45 The feature will not be active on the device until the feature is enabled, and
49 A feature is enabled as part of a configuration being enabled on the system.
56 feature being enabled that can adjust the behaviour of the operation programmed
57 by the feature.
60 at a given rate. When the feature is enabled then the current value of the
63 The feature descriptor defines a default value for a parameter, which is used
69 The current value of the parameter is loaded into the device when the feature
85 As with the feature, a descriptor is used to define the configuration.
103 If no preset is selected, then the parameter values defined in the feature
113    associated feature 'strobing' that works on ETMv4 CoreSight Devices.
124    has a feature that relates to the currently active configuration.
203 loaded the feature.