Lines Matching refs:ntuple

242 characteristics. They are enabled through ethtool's ntuple interface. To enable
245   # ethtool -K <ethX> ntuple <off|on>
247 NOTE: When you disable ntuple filters, all the user programmed filters are
249 when ntuple is re-enabled.
409 - aRFS requires that ntuple filtering is enabled via ethtool.
418 - aRFS and ethtool's ntuple interface both use the device's Flow Director. aRFS
419   and ntuple features can coexist, but you may encounter unexpected results if
420   there's a conflict between aRFS and ntuple requests. See "Intel(R) Ethernet
425 1. Enable the Intel Ethernet Flow Director and ntuple filters using ethtool.
429    # ethtool -K <ethX> ntuple on
461   # ethtool -K <ethX> ntuple off
463 NOTE: This command will disable ntuple filters and clear any aRFS filters in