Lines Matching full:traffic

69 expected and can throttle traffic between the host and the virtual switch,
71 unintended traffic streams, configure all SR-IOV enabled ports for VLAN tagging
153 basic traffic and minimal functionality, such as updating the NVM or
232 NOTE: This driver allows you to filter traffic based on a user-defined flexible
241 Flow Director filters are used to direct traffic that matches specified
270     <queue> - the queue to direct traffic toward (-1 discards the
271               matched traffic)
300 To match TCP traffic sent from 192.168.0.1, port 5300, directed to 192.168.0.5,
474 2. Use netperf to route traffic from the client to CPU 4 on the server with
595 ingress traffic, use the following command::
613 example is that the VF will get all traffic that is tagged with VLAN 100.
619 malicious traffic from the VF and disable Tx/Rx queues or drop the offending
717 the VLAN priority tag (802.1p) to filter traffic. That means that there are 8
718 different priorities that traffic can be filtered into. It also enables
730 In firmware-based mode, firmware intercepts all LLDP traffic and handles DCBX
737 In software-based mode, LLDP traffic is forwarded to the network stack and user
809   heavy traffic.
811   DCB. The LFC status may show as enabled but traffic is not paused. To resolve
843 allow L2 tunneling and the ability to segregate traffic within a particular
851 - 0x88A8 traffic will not be received unless VLAN stripping is disabled with
857   configured on the same port. 0x88a8/0x8100 traffic will not be received if
860 - The VF can only transmit 0x88A8/0x8100 (i.e., 802.1ad/802.1Q) traffic if:
864        not transmit 0x88A8/0x8100 traffic.
866 - The VF may not receive all network traffic based on the Inner VLAN header