Lines Matching full:eth0
762 A string (eth0, eth2, etc) specifying which slave is the
1113 BONDING_SLAVE0="eth0"
1149 "slave device" is either an interface name, e.g., "eth0", or a device
1229 for eth0 would be named /etc/sysconfig/network-scripts/ifcfg-eth0.
1232 DEVICE=eth0
1343 devices (presumed to be eth0 and eth1), and have it persist across
1350 ip link set eth0 master bond0
1490 To enslave interface eth0 to bond bond0::
1493 # echo +eth0 > /sys/class/net/bond0/bonding/slaves
1495 To free slave eth0 from bond bond0::
1497 # echo -eth0 > /sys/class/net/bond0/bonding/slaves
1501 /sys/class/net/bond0/slave_eth0 pointing to /sys/class/net/eth0, and
1502 /sys/class/net/eth0/master pointing to /sys/class/net/bond0.
1506 # echo -eth0 > /sys/class/net/eth0/master/bonding/slaves
1507 will free eth0 from whatever bond it is enslaved to, regardless of
1572 To make a simple bond of two e100 devices (presumed to be eth0
1582 echo +eth0 > /sys/class/net/bond0/bonding/slaves
1617 active-backup mode, with eth0 and eth1 as slaves::
1621 bond-slaves eth0 eth1
1624 bond-primary eth0 eth1
1637 auto eth0
1638 iface eth0 inet manual
1640 bond-primary eth0 eth1
1645 bond-primary eth0 eth1
1660 bonded interface in which eth0 connects to a private network, while eth1
1662 traffic over eth0 first, using eth1 only as a fall back, while all other traffic
1677 Currently Active Slave: eth0
1683 Slave Interface: eth0
1795 Currently Active Slave: eth0
1805 Slave Interface: eth0
1821 (MASTER) while eth0 and eth1 are slaves (SLAVE). Notice all slaves of
1833 eth0 Link encap:Ethernet HWaddr 00:C0:F0:1F:37:B4
2018 device bond0 has two slaves, eth0 and eth1, and the routing table is
2023 10.0.0.0 0.0.0.0 255.255.0.0 U 40 0 0 eth0
2031 case, another host on network 10 would use eth0 or eth1 before bond0).
2036 will arrive on a different interface (eth0). This reply looks to ARP
2060 alias eth0 tg3
2065 If neither eth0 and eth1 are slaves to bond0, then when the
2069 when the e1000 driver loads, it will receive eth0 and eth1 for its
2126 only one ipAdEntIfIndex for each IP address. For example, if eth0 and
2127 eth1 are slaves of bond0 and the driver for eth0 is loaded before the
2129 with the eth0 interface. This configuration is shown below, the IP
2130 address 192.168.1.1 has an interface index of 2 which indexes to eth0
2136 interfaces.ifTable.ifEntry.ifDescr.2 = eth0
2153 interfaces.ifTable.ifEntry.ifDescr.3 = eth0
2238 eth0 +-------+ eth1
2320 | |eth0 port1| | to other networks
2347 | |eth0 port1| +-------+ Host B |
2676 BladeCenter chassis, the eth0 port of all JS20 blades is hard wired to
2701 modules 1 and 2. In this configuration, the eth0 and eth1 ports of a
2707 switch. By using PMs in I/O module #1 and #2, the eth0 and eth1
2754 ethernet (eth0) only, therefore, any loss of link to eth0 will result
2875 from the bond (``ifenslave -d bond0 eth0``). The bonding driver will