Lines Matching +full:startup +full:- +full:sensor
158 - Christophe Gauthron
159 - Jean Delvare <jdelvare@suse.de>
163 -----------------
176 misconfigured by BIOS - PWM values would be inverted. This option tries
181 -------------------
183 All the chips supported by this driver are LPC Super-I/O chips, accessed
184 through the LPC bus (ISA-like I/O ports). The IT8712F additionally has an
192 -----------
211 is stored in the Super-I/O configuration space. Due to technical limitations,
222 IT8783E/F, and late IT8712F and IT8705F also have optional 16-bit tachometer
224 not compatible with the older chips and revisions. The 16-bit tachometer mode
235 IT8728F. It only supports 3 fans, 16-bit fan mode, and the full speed mode
239 to IT8728F. It only supports 16-bit fan mode. Both chips support up to 6 fans.
241 The IT8790E supports up to 3 fans. 16-bit fan mode is always enabled.
243 The IT8732F supports a closed-loop mode for fan control, but this is not
251 16-bit tachometer counters aren't used, fan readings can be divided by
273 The driver handles this transparently so user-space doesn't have to care.
284 once-only alarms.
286 Out-of-limit readings can also result in beeping, if the chip is properly
287 wired and configured. Beeping can be enabled or disabled per sensor type
293 To change sensor N to a thermistor, 'echo 4 > tempN_type' where N is 1, 2,
294 or 3. To change sensor N to a thermal diode, 'echo 3 > tempN_type'.
295 Give 0 for unused sensor. Any other value is invalid. To configure this at
296 startup, consult lm_sensors's /etc/sensors.conf. (4 = thermistor;
301 -----------------
312 read-only.
316 -------------------------------------------
342 -----------------------------
344 The driver supports temp[1-3]_offset sysfs attributes to adjust the reported
345 temperature for thermal diodes or diode-connected thermal transistors.
346 If a temperature sensor is configured for thermistors, the attribute values
347 are ignored. If the thermal sensor type is Intel PECI, the temperature offset