Lines Matching +full:thermal +full:- +full:sensors
1 # SPDX-License-Identifier: (GPL-2.0 OR MIT)
4 ---
5 $id: http://devicetree.org/schemas/thermal/qcom-tsens.yaml#
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
11 - Amit Kucheria <amitk@kernel.org>
22 - description: msm9860 TSENS based
24 - enum:
25 - qcom,ipq8064-tsens
27 - description: v0.1 of TSENS
29 - enum:
30 - qcom,mdm9607-tsens
31 - qcom,msm8916-tsens
32 - qcom,msm8939-tsens
33 - qcom,msm8974-tsens
34 - const: qcom,tsens-v0_1
36 - description: v1 of TSENS
38 - enum:
39 - qcom,msm8976-tsens
40 - qcom,qcs404-tsens
41 - const: qcom,tsens-v1
43 - description: v2 of TSENS
45 - enum:
46 - qcom,msm8996-tsens
47 - qcom,msm8998-tsens
48 - qcom,sc7180-tsens
49 - qcom,sc7280-tsens
50 - qcom,sc8180x-tsens
51 - qcom,sdm630-tsens
52 - qcom,sdm845-tsens
53 - qcom,sm8150-tsens
54 - qcom,sm8250-tsens
55 - qcom,sm8350-tsens
56 - const: qcom,tsens-v2
60 - description: TM registers
61 - description: SROT registers
66 - description: Combined interrupt if upper or lower threshold crossed
67 - description: Interrupt if critical threshold crossed
69 interrupt-names:
72 - const: uplow
73 - const: critical
75 nvmem-cells:
81 nvmem-cell-names:
84 - const: calib
85 - enum:
86 - calib_backup
87 - calib_sel
89 "#qcom,sensors":
91 Number of sensors enabled on this platform
96 "#thermal-sensor-cells":
99 Number of cells required to uniquely identify the thermal sensors. Since
100 we have multiple sensors this is set to 1
103 - compatible
104 - interrupts
105 - interrupt-names
106 - "#thermal-sensor-cells"
107 - "#qcom,sensors"
110 - if:
115 - qcom,ipq8064-tsens
116 - qcom,mdm9607-tsens
117 - qcom,msm8916-tsens
118 - qcom,msm8974-tsens
119 - qcom,msm8976-tsens
120 - qcom,qcs404-tsens
121 - qcom,tsens-v0_1
122 - qcom,tsens-v1
127 interrupt-names:
134 interrupt-names:
137 - if:
142 - qcom,tsens-v0_1
143 - qcom,tsens-v1
144 - qcom,tsens-v2
148 - reg
153 - |
154 #include <dt-bindings/interrupt-controller/arm-gic.h>
156 gcc: clock-controller {
160 tsens: thermal-sensor {
161 compatible = "qcom,ipq8064-tsens";
163 nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>;
164 nvmem-cell-names = "calib", "calib_backup";
166 interrupt-names = "uplow";
168 #qcom,sensors = <11>;
169 #thermal-sensor-cells = <1>;
173 - |
174 #include <dt-bindings/interrupt-controller/arm-gic.h>
176 tsens1: thermal-sensor@900000 {
177 compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";
181 nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
182 nvmem-cell-names = "calib", "calib_sel";
185 interrupt-names = "uplow";
187 #qcom,sensors = <5>;
188 #thermal-sensor-cells = <1>;
191 - |
192 #include <dt-bindings/interrupt-controller/arm-gic.h>
194 tsens2: thermal-sensor@4a9000 {
195 compatible = "qcom,qcs404-tsens", "qcom,tsens-v1";
199 nvmem-cells = <&tsens_caldata>;
200 nvmem-cell-names = "calib";
203 interrupt-names = "uplow";
205 #qcom,sensors = <10>;
206 #thermal-sensor-cells = <1>;
209 - |
210 #include <dt-bindings/interrupt-controller/arm-gic.h>
212 tsens3: thermal-sensor@c263000 {
213 compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
219 interrupt-names = "uplow", "critical";
221 #qcom,sensors = <13>;
222 #thermal-sensor-cells = <1>;