Lines Matching +full:stm32mp1 +full:- +full:clks

1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
4 $id: http://devicetree.org/schemas/phy/phy-stm32-usbphyc.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
22   |_ PHY port#2 ----|   |________________
27   - Amelie Delaunay <amelie.delaunay@st.com>
31     const: st,stm32mp1-usbphyc
42   "#address-cells":
45   "#size-cells":
48   vdda1v1-supply:
51   vdda1v8-supply:
54   '#clock-cells':
61   "^usb-phy@[0|1]$":
64       Each port the controller provides must be represented as a sub-node.
71       phy-supply:
74       "#phy-cells":
80           - $ref: ../connector/usb-connector.yaml
82           vbus-supply: true
85       - if:
91             "#phy-cells":
95             "#phy-cells":
102       - reg
103       - phy-supply
104       - "#phy-cells"
109   - compatible
110   - reg
111   - clocks
112   - "#address-cells"
113   - "#size-cells"
114   - vdda1v1-supply
115   - vdda1v8-supply
116   - usb-phy@0
117   - usb-phy@1
122   - |
123     #include <dt-bindings/clock/stm32mp1-clks.h>
124     #include <dt-bindings/reset/stm32mp1-resets.h>
126         compatible = "st,stm32mp1-usbphyc";
130         vdda1v1-supply = <&reg11>;
131         vdda1v8-supply = <&reg18>;
132         #address-cells = <1>;
133         #size-cells = <0>;
134         #clock-cells = <0>;
136         usbphyc_port0: usb-phy@0 {
138             phy-supply = <&vdd_usb>;
139             #phy-cells = <0>;
141                 compatible = "usb-a-connector";
142                 vbus-supply = <&vbus_sw>;
146         usbphyc_port1: usb-phy@1 {
148             phy-supply = <&vdd_usb>;
149             #phy-cells = <1>;