Lines Matching +full:reference +full:- +full:select

7  - micrel,led-mode : LED mode value to set for PHYs with configurable LEDs.
22  - micrel,rmii-reference-clock-select-25-mhz: RMII Reference Clock Select
25 	Setting the RMII Reference Clock Select bit enables 25 MHz rather
29 	non-standard, inverted function of this configuration bit.
30 	Specifically, a clock reference ("rmii-ref" below) is always needed to
31 	actually select a mode.
33  - clocks, clock-names: contains clocks according to the common clock bindings.
36 	- KSZ8021, KSZ8031, KSZ8081, KSZ8091: "rmii-ref": The RMII reference
39  - micrel,fiber-mode: If present the PHY is configured to operate in fiber mode
46 	In fiber mode, auto-negotiation is disabled and the PHY can only work in
47 	100base-fx (full and half duplex) modes.