Lines Matching full:idle
31 have when it is idle. The idle-state property is used for this. If the
32 idle-state is not present, the mux controller is typically left as is when
33 it is idle. For multiplexer chips that expose several mux controllers, the
34 idle-state property is an array with one idle state for each mux controller.
37 as is when it is idle. This is the default, but can still be useful for
39 there is a need to "step past" a mux controller and set some other idle
43 multiplexer. Using this disconnected high-impedance state as the idle state
44 is indicated with idle state (-2).
60 idle-state = <MUX_IDLE_DISCONNECT MUX_IDLE_AS_IS 2>;
78 idle-state:
82 idle-states:
85 idle. If the idle-state is not present, the mux controller is typically
86 left as is when it is idle. For multiplexer chips that expose several mux
87 controllers, the idle-state property is an array with one idle state for
91 as is when it is idle. This is the default, but can still be useful for
93 there is a need to "step past" a mux controller and set some other idle
97 multiplexer. Using this disconnected high-impedance state as the idle state
98 is indicated with idle state (-2).