Lines Matching +full:default +full:- +full:sample +full:- +full:phase
1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/mmc/rockchip-dw-mshc.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
13 controller that are not already included in the synopsys-dw-mshc-common.yaml
17 - $ref: "synopsys-dw-mshc-common.yaml#"
20 - Heiko Stuebner <heiko@sntech.de>
27 - const: rockchip,rk2928-dw-mshc
29 - const: rockchip,rk3288-dw-mshc
30 - items:
31 - enum:
32 - rockchip,px30-dw-mshc
33 - rockchip,rk1808-dw-mshc
34 - rockchip,rk3036-dw-mshc
35 - rockchip,rk3228-dw-mshc
36 - rockchip,rk3308-dw-mshc
37 - rockchip,rk3328-dw-mshc
38 - rockchip,rk3368-dw-mshc
39 - rockchip,rk3399-dw-mshc
40 - rockchip,rk3568-dw-mshc
41 - rockchip,rv1108-dw-mshc
42 - const: rockchip,rk3288-dw-mshc
55 the card interface unit clock. If "ciu-drive" and "ciu-sample" are
56 specified in clock-names, it should also contain
59 clock-names:
62 - const: biu
63 - const: ciu
64 - const: ciu-drive
65 - const: ciu-sample
67 Apart from the clock-names "biu" and "ciu" two more clocks
68 "ciu-drive" and "ciu-sample" are supported. They are used
69 to control the clock phases, "ciu-sample" is required for tuning
72 rockchip,default-sample-phase:
76 default: 0
78 The default phase to set "ciu-sample" at probing,
82 rockchip,desired-num-phases:
86 default: 360
93 - compatible
94 - reg
95 - interrupts
96 - clocks
97 - clock-names
102 - |
103 #include <dt-bindings/clock/rk3288-cru.h>
104 #include <dt-bindings/interrupt-controller/arm-gic.h>
105 #include <dt-bindings/interrupt-controller/irq.h>
107 compatible = "rockchip,rk3288-dw-mshc";
112 clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
114 reset-names = "reset";
115 fifo-depth = <0x100>;
116 max-frequency = <150000000>;