Lines Matching +full:data +full:- +full:shift

7 by synopsys-dw-mshc.txt and the properties used by the Samsung Exynos specific
13 	- "samsung,exynos4210-dw-mshc": for controllers with Samsung Exynos4210
15 	- "samsung,exynos4412-dw-mshc": for controllers with Samsung Exynos4412
17 	- "samsung,exynos5250-dw-mshc": for controllers with Samsung Exynos5250
19 	- "samsung,exynos5420-dw-mshc": for controllers with Samsung Exynos5420
21 	- "samsung,exynos7-dw-mshc": for controllers with Samsung Exynos7
23 	- "samsung,exynos7-dw-mshc-smu": for controllers with Samsung Exynos7
26 * samsung,dw-mshc-ciu-div: Specifies the divider value for the card interface
30 * samsung,dw-mshc-sdr-timing: Specifies the value of CIU clock phase shift value
31   in transmit mode and CIU clock phase shift value in receive mode for single
32   data rate mode operation. Refer notes below for the order of the cells and the
35 * samsung,dw-mshc-ddr-timing: Specifies the value of CUI clock phase shift value
36   in transmit mode and CIU clock phase shift value in receive mode for double
37   data rate mode operation. Refer notes below for the order of the cells and the
39 * samsung,dw-mshc-hs400-timing: Specifies the value of CIU TX and RX clock phase
40   shift value for hs400 mode operation.
42   Notes for the sdr-timing and ddr-timing values:
45       - First Cell: CIU clock phase shift value for tx mode.
46       - Second Cell: CIU clock phase shift value for rx mode.
49       - valid value for tx phase shift and rx phase shift is 0 to 7.
50       - when CIU clock divider value is set to 3, all possible 8 phase shift
52       - if CIU clock divider value is 0 (that is divide by 1), both tx and rx
53         phase shift clocks should be 0.
55 * samsung,read-strobe-delay: RCLK (Data strobe) delay to control HS400 mode
58 Required properties for a slot (Deprecated - Recommend to use one slot per host):
60 * gpios: specifies a list of gpios used for command, clock and data bus. The
62   rest of the gpios (depending on the bus-width property) are the data lines in
65 (Deprecated - Refer to Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt)
73 		compatible = "samsung,exynos5250-dw-mshc";
76 		#address-cells = <1>;
77 		#size-cells = <0>;
81 		cap-mmc-highspeed;
82 		cap-sd-highspeed;
83 		broken-cd;
84 		fifo-depth = <0x80>;
85 		card-detect-delay = <200>;
86 		samsung,dw-mshc-ciu-div = <3>;
87 		samsung,dw-mshc-sdr-timing = <2 3>;
88 		samsung,dw-mshc-ddr-timing = <1 2>;
89 		samsung,dw-mshc-hs400-timing = <0 2>;
90 		samsung,read-strobe-delay = <90>;
91 		bus-width = <8>;