Lines Matching +full:flip +full:- +full:vertical
11 Xilinx AXI CDMA engine, it does transfers between memory-mapped source
12 address and a memory-mapped destination address.
19 - compatible: Should be one of-
20 "xlnx,axi-vdma-1.00.a"
21 "xlnx,axi-dma-1.00.a"
22 "xlnx,axi-cdma-1.00.a"
23 "xlnx,axi-mcdma-1.00.a"
24 - #dma-cells: Should be <1>, see "dmas" property below
25 - reg: Should contain VDMA registers location and length.
26 - xlnx,addrwidth: Should be the vdma addressing size in bits(ex: 32 bits).
27 - dma-ranges: Should be as the following <dma_addr cpu_addr max_len>.
28 - dma-channel child node: Should have at least one channel and can have up to
31 - clocks: Input clock specifier. Refer to common clock bindings.
32 - clock-names: List of input clocks
45 - xlnx,num-fstores: Should be the number of framebuffers as configured in h/w.
48 - xlnx,sg-length-width: Should be set to the width in bits of the length
53 - xlnx,flush-fsync: Tells which channel to Flush on Frame sync.
60 - compatible:
61 For VDMA: It should be either "xlnx,axi-vdma-mm2s-channel" or
62 "xlnx,axi-vdma-s2mm-channel".
63 For CDMA: It should be "xlnx,axi-cdma-channel".
64 For AXIDMA and MCDMA: It should be either "xlnx,axi-dma-mm2s-channel"
65 or "xlnx,axi-dma-s2mm-channel".
66 - interrupts: Should contain per channel VDMA interrupts.
67 - xlnx,datawidth: Should contain the stream data width, take values
71 - xlnx,include-dre: Tells hardware is configured for Data
74 - xlnx,genlock-mode: Tells Genlock synchronization is
76 - xlnx,enable-vert-flip: Tells vertical flip is
79 - dma-channels: Number of dma channels in child node.
85 compatible = "xlnx,axi-vdma-1.00.a";
88 dma-ranges = <0x00000000 0x00000000 0x40000000>;
89 xlnx,num-fstores = <0x8>;
90 xlnx,flush-fsync = <0x1>;
93 clock-names = "s_axi_lite_aclk", "m_axi_mm2s_aclk", "m_axi_s2mm_aclk",
95 dma-channel@40030000 {
96 compatible = "xlnx,axi-vdma-mm2s-channel";
100 dma-channel@40030030 {
101 compatible = "xlnx,axi-vdma-s2mm-channel";
111 - dmas: a list of <[Video DMA device phandle] [Channel ID]> pairs,
114 - dma-names: a list of DMA channel names, one per "dmas" entry
120 compatible ="xlnx,axi-vdma-test-1.00.a";
123 dma-names = "vdma0", "vdma1";