Lines Matching +full:display +full:- +full:controller

1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/display/solomon,ssd1307fb.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Solomon SSD1307 OLED Controller Framebuffer
10   - Maxime Ripard <mripard@kernel.org>
15       - solomon,ssd1305fb-i2c
16       - solomon,ssd1306fb-i2c
17       - solomon,ssd1307fb-i2c
18       - solomon,ssd1309fb-i2c
26   reset-gpios:
29   vbat-supply:
36       Height in pixel of the screen driven by the controller
42       Width in pixel of the screen driven by the controller
44   solomon,page-offset:
50   solomon,segment-no-remap:
53       Display needs normal (non-inverted) data column to segment mapping
55   solomon,col-offset:
61   solomon,com-seq:
64       Display uses sequential COM pin configuration
66   solomon,com-lrremap:
69       Display uses left-right COM pin remap
71   solomon,com-invdir:
74       Display uses inverted COM pin scan direction
76   solomon,com-offset:
80       Number of the COM pin wired to the first display line
95   solomon,dclk-div:
100       Clock divisor. The default value is controller-dependent.
102   solomon,dclk-frq:
108       The default value is controller-dependent.
110   solomon,lookup-table:
111     $ref: /schemas/types.yaml#/definitions/uint8-array
118   solomon,area-color-enable:
121       Display uses color mode
123   solomon,low-power:
126       Display runs in low power mode
129   - compatible
130   - reg
133   - if:
137             const: solomon,ssd1305fb-i2c
140         solomon,dclk-div:
142         solomon,dclk-frq:
145   - if:
149             const: solomon,ssd1306fb-i2c
152         solomon,dclk-div:
154         solomon,dclk-frq:
157   - if:
161             const: solomon,ssd1307fb-i2c
164         solomon,dclk-div:
166         solomon,dclk-frq:
169         - pwms
171   - if:
175             const: solomon,ssd1309fb-i2c
178         solomon,dclk-div:
180         solomon,dclk-frq:
186   - |
188             #address-cells = <1>;
189             #size-cells = <0>;
192                     compatible = "solomon,ssd1307fb-i2c";
195                     reset-gpios = <&gpio2 7>;
199                     compatible = "solomon,ssd1306fb-i2c";
202                     reset-gpios = <&gpio2 7>;
203                     solomon,com-lrremap;
204                     solomon,com-invdir;
205                     solomon,com-offset = <32>;
206                     solomon,lookup-table = /bits/ 8 <0x3f 0x3f 0x3f 0x3f>;