Lines Matching full:attribute

12 		Unless otherwise specified in an attribute description all attributes are optional
16 		    A file that can be read to obtain the type of attribute.
17 		    This attribute is mandatory.
25 		All attribute types support the following values:
34 				This attribute is mandatory.
68 					increments of current_value this attribute accepts.
86 				A file that can be read to obtain attribute-level
87 				dependency rule. It says an attribute X will become read-only or
88 				suppressed, if/if-not attribute Y is configured.
92 				    [ReadOnlyIf:<attribute>=<value>]
93 				    [ReadOnlyIfNot:<attribute>=<value>]
94 				    [SuppressIf:<attribute>=<value>]
95 				    [SuppressIfNot:<attribute>=<value>]
103 				attribute is not "SelectDays" and its value will not be effective
111 					attribute's current value will be forcefully changed based
116 					    <value>[ForceIf:<attribute>=<value>]
117 					    <value>[ForceIfNot:<attribute>=<value>]
152 					This attribute is mandatory.
156 					This attribute is mandatory.
166 					The means of authentication.  This attribute is mandatory.
182 					This attribute is mandatory when mechanism == "password".
226 		A read-only attribute reads 1 if a reboot is necessary to apply
227 		pending BIOS attribute changes. Also, an uevent_KOBJ_CHANGE is
233 			        attribute changes applied
241 		2.	Before setting any attribute, check if it has any modifiers
243 			attribute.
255 		This attribute can be used to reset the BIOS Configuration.
273 		Note that any changes to this attribute requires a reboot
281 		This write only attribute can be used to send debug commands to the BIOS.
285 		Note that any changes to this attribute requires a reboot for changes to take effect.