Lines Matching refs:Count

5 		Count data of Count Y represented as a string.
11 		Count value ceiling for Count Y. This is the upper limit for the
18 		Count value floor for Count Y. This is the lower limit for the
25 		Count mode for channel Y. The ceiling and floor values for
26 		Count Y are used by the count mode where required. The following
35 			the Count Y ceiling value, while the lower limit is set
36 			to the Count Y floor value. The counter freezes at
49 			A count value boundary is set between the Count Y floor
50 			value and the Count Y ceiling value. The counter is
51 			reset to the Count Y floor value at count = ceiling when
52 			counting up, while the counter is set to the Count Y
65 		Discrete set of available values for the respective Count Y
73 		Read-only attribute that indicates the count direction of Count
90 		for Count Y. Suppose a counter device is used to count the total
107 		Count function mode of Count Y; count function evaluation is
108 		triggered by conditions specified by the Count Y signalZ_action
155 		Count Y. If possible, this should match the name of the
162 		Configure the prescaler value associated with Count Y.
187 		Action mode of Count Y for Signal Z. This attribute indicates
189 		evaluation for Count Y. The following action modes are