126 #define FAIL_PROP(c, dti, node, prop, ...)				\  macro
209 		FAIL_PROP(c, dti, node, prop, "property is not a string");  in check_is_string()
233 			FAIL_PROP(c, dti, node, prop, "property is not a string list");  in check_is_string_list()
256 		FAIL_PROP(c, dti, node, prop, "property is not a single cell");  in check_is_cell()
291 				FAIL_PROP(c, dti, node, prop, "Duplicate property name");  in check_duplicate_property_names()
369 			FAIL_PROP(c, dti, node, prop, "Bad character '%c' in property name",  in check_property_name_chars()
401 			FAIL_PROP(c, dti, node, prop, "Character '%c' not recommended in property name",  in check_property_name_chars_strict()
475 		FAIL_PROP(c, dti, node, prop, "bad length (%d) %s property",  in check_phandle_prop()
501 		FAIL_PROP(c, dti, node, prop, "bad value (0x%x) in %s property",  in check_phandle_prop()
700 			FAIL_PROP(c, dti, node, prop, "aliases property is not a valid node (%s)",  in check_alias_paths()
750 		FAIL_PROP(c, dti, node, prop, "property is empty");  in check_reg_format()
757 		FAIL_PROP(c, dti, node, prop, "property has invalid length (%d bytes) "  in check_reg_format()
775 		FAIL_PROP(c, dti, node, prop, "Root node has a \"%s\" property",  in check_ranges_format()
788 			FAIL_PROP(c, dti, node, prop, "empty \"%s\" property but its "  in check_ranges_format()
793 			FAIL_PROP(c, dti, node, prop, "empty \"%s\" property but its "  in check_ranges_format()
798 		FAIL_PROP(c, dti, node, prop, "\"%s\" property has invalid length (%d bytes) "  in check_ranges_format()
840 		FAIL_PROP(c, dti, node, prop, "value must be 2 cells");  in check_pci_bridge()
845 		FAIL_PROP(c, dti, node, prop, "1st cell must be less than or equal to 2nd cell");  in check_pci_bridge()
847 		FAIL_PROP(c, dti, node, prop, "maximum bus number must be less than 256");  in check_pci_bridge()
877 		FAIL_PROP(c, dti, node, prop, "PCI bus number %d out of range, expected (%d - %d)",  in check_pci_device_bus_num()
899 		FAIL_PROP(c, dti, node, prop, "PCI reg config space address cells 2 and 3 must be 0");  in check_pci_device_reg()
906 		FAIL_PROP(c, dti, node, prop, "PCI reg address is not configuration space");  in check_pci_device_reg()
908 		FAIL_PROP(c, dti, node, prop, "PCI reg config space address register number must be 0");  in check_pci_device_reg()
1061 			FAIL_PROP(c, dti, node, prop, "I2C address must be less than 10-bits, got \"0x%x\"",  in check_i2c_bus_reg()
1064 …FAIL_PROP(c, dti, node, prop, "I2C address must be less than 7-bits, got \"0x%x\". Set I2C_TEN_BIT…  in check_i2c_bus_reg()
1302 		FAIL_PROP(c, dti, node, prop,  in check_obsolete_chosen_interrupt_controller()
1349 		FAIL_PROP(c, dti, node, prop, "Use 'stdout-path' instead");  in check_chosen_node_stdout_path()
1373 		FAIL_PROP(c, dti, node, prop,  in check_property_phandle_args()
1406 				FAIL_PROP(c, dti, node, prop,  in check_property_phandle_args()
1413 			FAIL_PROP(c, dti, node, prop,  in check_property_phandle_args()
1433 			FAIL_PROP(c, dti, node, prop,  in check_property_phandle_args()
1537 		FAIL_PROP(c, dti, node, prop,  in check_deprecated_gpio_property()
1594 		FAIL_PROP(c, dti, node, irq_prop, "size (%d) is invalid, expected multiple of %zu",  in check_interrupts_property()
1611 				FAIL_PROP(c, dti, parent, prop, "Invalid phandle");  in check_interrupts_property()
1617 				FAIL_PROP(c, dti, parent, prop, "Bad phandle");  in check_interrupts_property()
1643 		FAIL_PROP(c, dti, node, prop,  in check_interrupts_property()
1728 		FAIL_PROP(c, dti, node, get_property(node, "#address-cells"),  in check_graph_reg()
1732 		FAIL_PROP(c, dti, node, get_property(node, "#size-cells"),  in check_graph_reg()
1768 		FAIL_PROP(c, dti, endpoint, prop, "graph phandle is not valid");  in get_remote_endpoint()