234 	dev_dbg(&port->dev, "mos7840_set_reg_sync offset is %x, value %x\n", reg, val);  in mos7840_set_reg_sync()
268 	dev_dbg(&port->dev, "%s offset is %x, return val %x\n", __func__, reg, *val);  in mos7840_get_reg_sync()
292 	dev_dbg(&port->dev, "%s application number is %x\n", __func__, val);  in mos7840_set_uart_reg()
321 	dev_dbg(&port->dev, "%s application number is %x\n", __func__, Wval);  in mos7840_get_uart_reg()
340 	dev_dbg(&port->dev, "SpRegOffset is %2x\n", mos7840_port->SpRegOffset);  in mos7840_dump_serial_port()
341 	dev_dbg(&port->dev, "ControlRegOffset is %2x\n", mos7840_port->ControlRegOffset);  in mos7840_dump_serial_port()
342 	dev_dbg(&port->dev, "DCRRegOffset is %2x\n", mos7840_port->DcrRegOffset);  in mos7840_dump_serial_port()
363 		dev_dbg(&urb->dev->dev, "%s - urb shutting down: %d\n",  in mos7840_set_led_callback()
367 		dev_dbg(&urb->dev->dev, "%s - nonzero urb status: %d\n",  in mos7840_set_led_callback()
443 		dev_dbg(&urb->dev->dev, "nonzero read bulk status received: %d\n", status);  in mos7840_bulk_in_callback()
456 		dev_dbg(&port->dev, "icount.rx is %d:\n", port->icount.rx);  in mos7840_bulk_in_callback()
466 		dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, retval = %d\n", retval);  in mos7840_bulk_in_callback()
495 		dev_dbg(&port->dev, "nonzero write bulk status received:%d\n", status);  in mos7840_bulk_out_data_callback()
560 		dev_dbg(&port->dev, "Reading Spreg failed\n");  in mos7840_open()
566 		dev_dbg(&port->dev, "writing Spreg failed\n");  in mos7840_open()
573 		dev_dbg(&port->dev, "writing Spreg failed\n");  in mos7840_open()
582 		dev_dbg(&port->dev, "Reading Controlreg failed\n");  in mos7840_open()
590 		dev_dbg(&port->dev, "writing Controlreg failed\n");  in mos7840_open()
601 		dev_dbg(&port->dev, "disabling interrupts failed\n");  in mos7840_open()
608 		dev_dbg(&port->dev, "Writing FIFO_CONTROL_REGISTER  failed\n");  in mos7840_open()
615 		dev_dbg(&port->dev, "Writing FIFO_CONTROL_REGISTER  failed\n");  in mos7840_open()
676 	dev_dbg(&port->dev, "port number is %d\n", port->port_number);  in mos7840_open()
677 	dev_dbg(&port->dev, "minor number is %d\n", port->minor);  in mos7840_open()
678 	dev_dbg(&port->dev, "Bulkin endpoint is %d\n", port->bulk_in_endpointAddress);  in mos7840_open()
679 	dev_dbg(&port->dev, "BulkOut endpoint is %d\n", port->bulk_out_endpointAddress);  in mos7840_open()
680 	dev_dbg(&port->dev, "Interrupt endpoint is %d\n", port->interrupt_in_endpointAddress);  in mos7840_open()
681 	dev_dbg(&port->dev, "port's number in the device is %d\n", mos7840_port->port_num);  in mos7840_open()
703 	dev_dbg(&port->dev, "%s: bulkin endpoint is %d\n", __func__, port->bulk_in_endpointAddress);  in mos7840_open()
754 	dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars);  in mos7840_chars_in_buffer()
808 	dev_dbg(&port->dev, "%s mos7840_port->shadowLCR is %x\n", __func__, mos7840_port->shadowLCR);  in mos7840_break()
837 	dev_dbg(&mos7840_port->port->dev, "%s - returns %d\n", __func__, room);  in mos7840_write_room()
872 			dev_dbg(&port->dev, "URB:%d\n", i);  in mos7840_write()
879 		dev_dbg(&port->dev, "%s - no more free urbs\n", __func__);  in mos7840_write()
912 	dev_dbg(&port->dev, "bulkout endpoint is %d\n", port->bulk_out_endpointAddress);  in mos7840_write()
929 	dev_dbg(&port->dev, "icount.tx is %d:\n", port->icount.tx);  in mos7840_write()
1016 	dev_dbg(&port->dev, "%s - 0x%04X\n", __func__, result);  in mos7840_tiocmget()
1049 		dev_dbg(&port->dev, "setting MODEM_CONTROL_REGISTER Failed\n");  in mos7840_tiocmset()
1065 	dev_dbg(&port->dev, "%s - %d\n", __func__, baudRate);  in mos7840_calc_baud_rate_divisor()
1111 	dev_dbg(&port->dev, "%s - baud = %d\n", __func__, baudRate);  in mos7840_send_cmd_write_baud_rate()
1122 			dev_dbg(&port->dev, "Writing spreg failed in set_serial_baud\n");  in mos7840_send_cmd_write_baud_rate()
1135 			dev_dbg(&port->dev, "Writing spreg failed in set_serial_baud\n");  in mos7840_send_cmd_write_baud_rate()
1150 			dev_dbg(&port->dev, "reading spreg failed in set_serial_baud\n");  in mos7840_send_cmd_write_baud_rate()
1157 			dev_dbg(&port->dev, "Writing spreg failed in set_serial_baud\n");  in mos7840_send_cmd_write_baud_rate()
1173 		dev_dbg(&port->dev, "set_serial_baud Value to write DLL is %x\n", Data);  in mos7840_send_cmd_write_baud_rate()
1177 		dev_dbg(&port->dev, "set_serial_baud Value to write DLM is %x\n", Data);  in mos7840_send_cmd_write_baud_rate()
1237 			dev_dbg(&port->dev, "%s - parity = odd\n", __func__);  in mos7840_change_port_settings()
1240 			dev_dbg(&port->dev, "%s - parity = even\n", __func__);  in mos7840_change_port_settings()
1244 		dev_dbg(&port->dev, "%s - parity = none\n", __func__);  in mos7840_change_port_settings()
1253 		dev_dbg(&port->dev, "%s - stop bits = 2\n", __func__);  in mos7840_change_port_settings()
1256 		dev_dbg(&port->dev, "%s - stop bits = 1\n", __func__);  in mos7840_change_port_settings()
1264 	dev_dbg(&port->dev, "%s - mos7840_port->shadowLCR is %x\n", __func__,  in mos7840_change_port_settings()
1306 		dev_dbg(&port->dev, "%s", "Picked default baud...\n");  in mos7840_change_port_settings()
1310 	dev_dbg(&port->dev, "%s - baud rate = %d\n", __func__, baud);  in mos7840_change_port_settings()
1321 			dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, status = %d\n",  in mos7840_change_port_settings()
1326 	dev_dbg(&port->dev, "%s - mos7840_port->shadowLCR is End %x\n", __func__,  in mos7840_change_port_settings()
1351 			dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, status = %d\n",  in mos7840_set_termios()
1421 		dev_dbg(&port->dev, "%s TIOCSERGETLSR\n", __func__);  in mos7840_ioctl()
1551 		dev_dbg(dev, "Writing ZLP_REG5 failed status-0x%x\n", status);  in mos7840_attach()
1553 		dev_dbg(dev, "ZLP_REG5 Writing success status%d\n", status);  in mos7840_attach()
1572 	dev_dbg(&port->dev, "mos7840_startup: configuring port %d\n", pnum);  in mos7840_port_probe()
1588 	dev_dbg(&port->dev, "port->minor = %d\n", port->minor);  in mos7840_port_probe()
1589 	dev_dbg(&port->dev, "mos7840_port->port_num = %d\n", mos7840_port->port_num);  in mos7840_port_probe()
1613 		dev_dbg(&port->dev, "Reading ControlReg failed status-0x%x\n", status);  in mos7840_port_probe()
1616 		dev_dbg(&port->dev, "ControlReg Reading success val is %x, status%d\n", Data, status);  in mos7840_port_probe()
1625 		dev_dbg(&port->dev, "Writing ControlReg failed(rx_disable) status-0x%x\n", status);  in mos7840_port_probe()
1628 		dev_dbg(&port->dev, "ControlReg Writing success(rx_disable) status%d\n", status);  in mos7840_port_probe()
1636 		dev_dbg(&port->dev, "Writing DCR0 failed status-0x%x\n", status);  in mos7840_port_probe()
1639 		dev_dbg(&port->dev, "DCR0 Writing success status%d\n", status);  in mos7840_port_probe()
1645 		dev_dbg(&port->dev, "Writing DCR1 failed status-0x%x\n", status);  in mos7840_port_probe()
1648 		dev_dbg(&port->dev, "DCR1 Writing success status%d\n", status);  in mos7840_port_probe()
1654 		dev_dbg(&port->dev, "Writing DCR2 failed status-0x%x\n", status);  in mos7840_port_probe()
1657 		dev_dbg(&port->dev, "DCR2 Writing success status%d\n", status);  in mos7840_port_probe()
1663 		dev_dbg(&port->dev, "Writing CLK_START_VALUE_REGISTER failed status-0x%x\n", status);  in mos7840_port_probe()
1666 		dev_dbg(&port->dev, "CLK_START_VALUE_REGISTER Writing success status%d\n", status);  in mos7840_port_probe()
1671 		dev_dbg(&port->dev, "Writing CLK_MULTI_REGISTER failed status-0x%x\n", status);  in mos7840_port_probe()
1674 		dev_dbg(&port->dev, "CLK_MULTI_REGISTER Writing success status%d\n", status);  in mos7840_port_probe()
1680 		dev_dbg(&port->dev, "Writing SCRATCH_PAD_REGISTER failed status-0x%x\n", status);  in mos7840_port_probe()
1683 		dev_dbg(&port->dev, "SCRATCH_PAD_REGISTER Writing success status%d\n", status);  in mos7840_port_probe()
1691 		dev_dbg(&port->dev, "ZLIP offset %x\n",  in mos7840_port_probe()
1694 			dev_dbg(&port->dev, "Writing ZLP_REG%d failed status-0x%x\n", pnum + 2, status);  in mos7840_port_probe()
1697 			dev_dbg(&port->dev, "ZLP_REG%d Writing success status%d\n", pnum + 2, status);  in mos7840_port_probe()
1703 		dev_dbg(&port->dev, "ZLIP offset %x\n",  in mos7840_port_probe()
1706 			dev_dbg(&port->dev, "Writing ZLP_REG%d failed status-0x%x\n", pnum + 1, status);  in mos7840_port_probe()
1709 			dev_dbg(&port->dev, "ZLP_REG%d Writing success status%d\n", pnum + 1, status);  in mos7840_port_probe()