Lines Matching full:usb
3 # USB Host Controller Drivers
5 comment "USB Host Controller Drivers"
12 host/peripheral/OTG USB controllers.
21 tristate "xHCI HCD (USB 3.0) support"
24 The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
113 tristate "Broadcom STB USB support"
130 tristate "EHCI HCD (USB 2.0) support"
133 The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
135 If your USB host controller supports USB 2.0, you will likely want to
139 or UHCI) to handle USB 1.1 devices connected to root hub ports. Ports
142 probably configure the OHCI (for NEC and some other vendors) USB Host
146 You may want to read <file:Documentation/usb/ehci.rst>.
170 (TT) in USB 2.0 hubs. Without this, only one transfer will be
175 highspeed USB hub which is connected to a highspeed USB Host
191 tristate "EHCI support for on-chip PMC MSP71xx USB controller"
196 Enables support for the onchip USB controller on the PMC_MSP7100 Family SoC's.
200 bool "Use Xilinx usb host EHCI controller core"
205 Xilinx xps USB host controller core is EHCI compliant and has
211 tristate "Support for Freescale on-chip EHCI USB controller"
214 Variation of ARC USB block used in some Freescale chips.
217 tristate "Support for Freescale i.MX on-chip EHCI USB controller"
221 Variation of ARC USB block used in some Freescale chips.
224 tristate "Support for Nuvoton NPCM7XX on-chip EHCI USB controller"
241 tristate "Support for Marvell EBU on-chip EHCI USB controller"
249 Marvell PXA/MMP USB controller" for those.
252 tristate "Support for ST SPEAr on-chip EHCI USB controller"
260 tristate "Support for ST STiHxxx on-chip EHCI USB controller"
269 tristate "Support for Atmel on-chip EHCI USB controller"
282 This driver enables support for the internal USB Host Controllers
286 bool "EHCI support for PPC USB controller on OF platform bus"
290 Enables support for the USB controller present on the PowerPC
294 bool "EHCI support for SuperH USB controller"
307 tristate "EHCI support for Marvell PXA/MMP USB controller"
312 USB SPH and OTG controller. SPH is a single port host, and it can
317 on-chip EHCI USB controller" for those.
328 It is needed for high-speed (480Mbit/sec) USB 2.0 device
350 USB 2.0 device support. All CN6XXX based chips with USB are
359 The OXU210HP is an USB host/OTG/device controller. Enable this
363 implement OTG nor USB device controllers.
372 The ISP1160 and ISP1161 chips are USB host controllers. Enable this
394 depends on USB && HAS_DMA && HAS_IOMEM
404 tristate "MAX3421 HCD (USB-over-SPI) support"
405 depends on USB && SPI
407 The Maxim MAX3421E chip supports standard USB 2.0-compliant
415 tristate "OHCI HCD (USB 1.1) support"
419 USB 1.1 host controller hardware. It does more in hardware than Intel's
420 UHCI specification. If your USB host controller follows the OHCI spec,
422 USB controller from Intel or VIA, this is appropriate. If your host
425 right "prog-if" for your USB controller(s): EHCI, OHCI, or UHCI.
441 tristate "Support for ST SPEAr on-chip OHCI USB controller"
449 tristate "Support for ST STiHxxx on-chip OHCI USB controller"
466 tristate "Support for LPC on-chip OHCI USB controller"
476 tristate "Support for PXA27X/PXA3XX on-chip OHCI USB controller"
484 tristate "Support for Atmel on-chip OHCI USB controller"
520 Enables support for big-endian USB controllers present on the
528 Enables support for little-endian USB controllers present on the
537 tristate "OHCI support for PCI-bus USB controllers"
542 Enables support for PCI-bus plug-in USB controller cards.
555 Broadcom USB OHCI core.
563 bool "OHCI support for SuperH USB controller (DEPRECATED)"
588 It is needed for low-speed USB 1.0 device support.
610 controller. It is needed for low-speed USB 1.0 device
611 support. All CN6XXX based chips with USB are supported.
620 accessing the USB hardware in the PC (which is also called the USB
621 host controller). If your USB host controller conforms to this
645 tristate "Freescale QE USB Host Controller support"
650 This driver enables support for Freescale QE USB Host Controller
652 Full and Low Speed USB.
655 bool "Freescale QE USB Host Controller debug support"
665 The U132 adapter is a USB to CardBus adapter specifically designed
675 USB client driver that interfaces to the FTDI chip within ELAN's
676 USB-to-PCMCIA adapter, and this "u132-hcd" module is a USB host
680 This driver has been tested with a CardBus OHCI USB adapter, and
681 worked with a USB PEN Drive inserted into the first USB port of
692 The SL811HS is a single-port USB controller that supports either
724 The R8A66597 is a USB 2.0 host and peripheral controller.
736 The Renesas USBHS is a USB 2.0 host and peripheral controller.
748 This driver enables support for the on-chip USB host in the
755 tristate "BCMA usb host driver"
767 tristate "SSB usb host driver"
787 or embedded hosts that need to undergo USB-IF compliance testing with
792 their USB hardware designs. It is not needed for normal use. If