Lines Matching +full:omap +full:- +full:usb2

1 # SPDX-License-Identifier: GPL-2.0
7 # NOTE: Gadget support ** DOES NOT ** depend on host-side CONFIG_USB !!
9 # - Host systems (like PCs) need CONFIG_USB (with "A" jacks).
10 # - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks).
11 # - Some systems have both kinds of controllers.
13 # With help from a special transceiver and a "Mini-AB" jack, systems with
14 # both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG).
22 # - integrated/SOC controllers first
23 # - licensed IP used in both SOC and discrete versions
24 # - discrete ones (including all PCI-only controllers)
25 # - debug/dummy gadget+hcd is last.
62 USBA is the integrated high-speed USB Device controller on
72 allowing the usage of ep1 - ep6
75 configuration allowing the usage of ep1 - ep3
78 the usage of ep1 - ep8
96 Dual-Role(DR) USB controller, which supports device mode.
115 Faraday USB2.0 OTG controller which can be configured as
130 tristate "OMAP USB Device Controller"
134 Many Texas Instruments OMAP processors have flexible full
137 controller in the OMAP 1611, and should work with controllers
138 in other OMAP processors too, given minor tweaks.
149 Intel's PXA 25x series XScale ARM-5TE processors include
151 controller in the IXP 4xx series is register-compatible.
153 It has fifteen fixed-function endpoints, as well as endpoint
225 Samsung's S3C2410 is an ARM-4 processor with an integrated
247 tristate "Marvell USB2.0 Device Controller"
251 USB2.0 OTG controller, which can be configured as high speed or
284 AHB subsystem USB2.0 Device Controller (UDC).
392 tristate "Toshiba TC86C001 'Goku-S'"
422 for IVI(In-Vehicle Infotainment) use.
434 USB peripheral controller driver for Xilinx USB2 device.
435 Xilinx USB2 device is a soft IP which supports both full
441 dynamically linked module called "udc-xilinx" and force all
445 tristate "MAX3420 (USB-over-SPI) support"
448 The Maxim MAX3420 chip supports USB2.0 full-speed peripheral mode.
465 source "drivers/usb/gadget/udc/aspeed-vhub/Kconfig"
468 # LAST -- dummy/emulated controller
486 side Linux-USB device driver, this may help to debug both sides