Lines Matching full:usb
3 # USB device configuration
30 bool "USB support"
34 This option adds core support for Universal Serial Bus (USB).
39 source "drivers/usb/common/Kconfig"
44 config USB config
45 tristate "Support for Host-side USB"
51 Universal Serial Bus (USB) is a specification for a serial bus
54 and allows for hot swapping. Up to 127 USB peripherals can be
55 connected to a single USB host in a tree structure.
57 The USB host is the root of the tree, the peripherals are the
58 leaves and the inner nodes are special USB devices called hubs.
59 Most PCs now have USB host ports, used to connect peripherals
63 Say Y here if your computer has a host-side USB port and you want
64 to use USB devices. You then need to say Y to at least one of the
65 Host Controller Driver (HCD) options below. Choose a USB 1.1
67 and "EHCI HCD (USB 2.0) support" except for older systems that
68 do not have USB 2.0 support. It doesn't normally hurt to select
71 If your system has a device-side USB port, used in the peripheral
72 side of the USB protocol, see the "USB Gadget" framework instead.
74 After choosing your HCD, then select drivers for the USB peripherals
76 in <file:Documentation/usb/> and especially the links given in
77 <file:Documentation/usb/usb-help.rst>.
83 bool "PCI based USB host interface"
88 PCI and USB modules with the USB module directly controlled by
92 will not be built in the USB driver.
94 if USB
96 source "drivers/usb/core/Kconfig"
98 source "drivers/usb/mon/Kconfig"
100 source "drivers/usb/host/Kconfig"
102 source "drivers/usb/renesas_usbhs/Kconfig"
104 source "drivers/usb/class/Kconfig"
106 source "drivers/usb/storage/Kconfig"
108 source "drivers/usb/image/Kconfig"
110 source "drivers/usb/usbip/Kconfig"
114 source "drivers/usb/cdns3/Kconfig"
116 source "drivers/usb/mtu3/Kconfig"
118 source "drivers/usb/musb/Kconfig"
120 source "drivers/usb/dwc3/Kconfig"
122 source "drivers/usb/dwc2/Kconfig"
124 source "drivers/usb/chipidea/Kconfig"
126 source "drivers/usb/isp1760/Kconfig"
128 comment "USB port drivers"
130 if USB
137 This driver is for USB parallel port adapters that use the Lucent
138 Technologies USS-720 chip. These cables are plugged into your USB
139 port and provide USB compatibility to peripherals designed with
143 mode, it looks to the computer like a standard USB printer. Only
145 USB printer driver ("USB Printer support", above) may be used in
155 Say Y here if you own an USS-720 USB->Parport cable and intend to
161 source "drivers/usb/serial/Kconfig"
163 source "drivers/usb/misc/Kconfig"
165 source "drivers/usb/atm/Kconfig"
167 endif # USB
169 source "drivers/usb/phy/Kconfig"
171 source "drivers/usb/gadget/Kconfig"
173 source "drivers/usb/typec/Kconfig"
175 source "drivers/usb/roles/Kconfig"