Lines Matching full:use
37 Say Y here if you wish to use an AMBA PrimeCell UART as the system
65 Say Y here if you wish to use an AMBA PrimeCell UART as the system
121 If you say Y here, it will be possible to use a serial port as the
143 Say Y here if you wish to use an on-chip UART on a Atmel
153 Say Y here if you wish to use the PDC to do DMA transfers to
155 actually use DMA transfers, make sure that the use_dma_tx
161 this matters don't use DMA.
175 To use this, you should create suitable ttyATn device nodes in
184 This special driver allows you to temporary use NMI debugger port
195 use raw console.
213 Say Y here if you wish to use a Amlogic MesonX UART as the
269 Allow selection of the S3C24XX on-board serial ports for use as
327 If you say Y here, it will be possible to use a the Tegra TCU as the
369 If you say Y here, it will be possible to use a serial port as the
375 DECstations that use this driver.
399 If you say Y here, it will be possible to use a serial port as the
443 Unless you have a specific need, you should use SERIAL_8250_PXA
466 Unless you have a specific need, you should use SERIAL_8250_PXA
535 Say Y here if you want to use the Xilinx uartlite serial controller.
546 Say Y here if you wish to use a Xilinx uartlite as the system
577 If you would like to be able to use the Zilog8530 serial port
593 If you would like to be able to use the SU serial port
607 software console. The following steps need to be completed to use
629 following steps must be completed to use the PDC console:
649 If you would like to be able to use the SAB82532 serial port
658 systems. Say Y if you want to be able to use this device.
713 to use serial ports, say Y. Otherwise, say N.
721 to use serial console, say Y. Otherwise, say N.
739 If you would like to be able to use one of the high speed serial
785 bool "Use ttySn device nodes for Zilog z85c30"
791 the two drivers being unable to coexist; you could not use
795 use the device numbers allocated for /dev/ttyPZn. This allows
799 be reconfigured to use /dev/ttyPZn instead of /dev/ttySn.
803 unable to use the 8250 module for PCMCIA or other 16C550-style
814 If you would like to be able to use the z85c30 serial port
831 Say Y here if you wish to use a SCC or SMC CPM UART as the system
849 Say Y or M to use PIC32 serial ports, otherwise say N. Note that
850 to use a serial port as a console, this must be included in kernel and
861 Say Y to use the PIC32 console, otherwise say N.
869 like to use them, you must answer Y or M to this option. Note that
870 for use as console, it must be included in kernel and not as a
878 Select this options if you'd like to use one of the PSC serial port
931 If you have a NEC VR4100 series processor and you want to use
940 If you have a NEC VR4100 series processor and you want to use
1012 Select this option if you would like to use omap serial port as
1037 Select this option if you would like to use a SiFive UART as the
1062 Select this option if you would like to use a Lantiq UART as the
1241 ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is
1242 for MP(Media Phone) use and ML7831 IOH is for general purpose use.
1251 Say Y here if you wish to use the PCH UART as the system console
1293 If you have an Atheros AR933X SOC based board and want to use the
1371 These adapters use a "RocketPort 2" ASIC that is not compatible
1505 based on the Armada-3700 SoC and wish to use the on-board serial
1517 Say 'Y' here if you wish to use Armada-3700 UART as the system console.
1528 Say 'Y' here if you wish to use the on-board serial port.
1538 Say 'Y' here if you wish to use Actions Semiconductor S500/S900 UART
1547 Say 'Y' here if you wish to use the on-board serial port.
1557 Say 'Y' here if you wish to use the RDA8810PL UART as the system
1581 Say 'Y' here if you wish to use a USIO/UART of Socionext Milbeaut