Lines Matching +full:s900 +full:- +full:dma
1 # SPDX-License-Identifier: GPL-2.0
19 comment "Non-8250 serial port support"
89 bool "Early console using RISC-V SBI"
95 Support for early debug console using RISC-V SBI. This enables
101 tristate "BCM1xxx on-chip DUART serial support"
107 the BCM1250 and derived System-On-a-Chip (SOC) devices. Note that
113 the module will be called sb1250-duart.
129 bool "AT91 on-chip serial port support"
135 This enables the driver for the on-chip UARTs of the Atmel
143 Say Y here if you wish to use an on-chip UART on a Atmel
149 bool "Support DMA transfers on AT91 serial port"
153 Say Y here if you wish to use the PDC to do DMA transfers to
155 actually use DMA transfers, make sure that the use_dma_tx
160 properly when DMA is enabled. Make sure that ports where
161 this matters don't use DMA.
204 This enables the driver for the on-chip UARTs of the Amlogic
224 This enables the driver for the on-chip UARTs of the Cirrus
242 Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
269 Allow selection of the S3C24XX on-board serial ports for use as
284 Support for the on-chip UART on the CSR SiRFprimaII series,
306 Support for the on-chip UARTs on the NVIDIA Tegra series SOCs
309 are enabled). This driver uses the APB DMA to achieve higher baudrate
317 Support for the mailbox-based TCU (Tegra Combined UART) serial port.
350 that can be controlled through I2C or high-speed SPI.
360 DZ11-family serial controllers for DECstations and VAXstations,
703 bool "DMA support" if EXPERT
712 If you have a MIPS-based Philips SoC such as PNX8330 and you want
720 If you have a MIPS-based Philips SoC such as PNX8330 and you want
796 the pmac_zilog and 8250 drivers to co-exist, but may cause
798 access the built-in serial ports on powermacs will need to
803 unable to use the 8250 module for PCMCIA or other 16C550-style
951 box, for instance in order to become a dial-in server. This driver
960 tristate "MSM on-chip serial port support"
971 tristate "QCOM on-chip GENI based serial port support"
986 bool "VIA VT8500 on-chip serial port support"
1003 By enabling this option you take advantage of dma feature available
1004 with the omap-serial driver. DMA support can be enabled from platform
1144 BCM7xxx (STB) - DOCSIS console
1237 Enabling PCH_DMA, this PCH UART works as DMA mode.
1241 ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is
1294 built-in UART of the SoC, say Y to this option.
1304 Enable a built-in UART port of the AR933X to be the system console.
1344 Driver for on-chip UART for ARC(Synopsys) for the legacy
1393 Support for the on-chip lpuart on some Freescale SOCs.
1409 Support for the on-chip LINFlexD UART on some Freescale SOCs.
1425 Support for the on-chip USART on Conexant Digicolor SoCs.
1440 This driver is for the on-chip Asychronous Serial Controller on
1457 Say yes here to enable support for the MEN 16z135 High Speed UART IP-Core
1487 This driver is for the on-chip Serial Controller on
1505 based on the Armada-3700 SoC and wish to use the on-board serial
1517 Say 'Y' here if you wish to use Armada-3700 UART as the system console.
1527 This driver is for Actions Semiconductor S500/S900 SoC's UART.
1528 Say 'Y' here if you wish to use the on-board serial port.
1538 Say 'Y' here if you wish to use Actions Semiconductor S500/S900 UART
1547 Say 'Y' here if you wish to use the on-board serial port.
1569 int "Maximum number of CSIO/UART ports (1-8)"