Lines Matching full:ports

160 	  properly when DMA is enabled. Make sure that ports where
244 	  provide all of these ports, depending on how the serial port
260 	  Select the number of available UART ports for the Samsung S3C
269 	  Allow selection of the S3C24XX on-board serial ports for use as
286 	  provide all of these ports, depending on how the serial port
308 	  provide all of these ports, depending on how the serial port
386 	  for serial ports in newer DECstation systems.  These include the
441 	  can enable its onboard serial ports by enabling this option.
551 	int "Maximum number of uartlite serial ports"
570 	  This driver supports the Zilog8530 serial ports found on many Sparc
571 	  systems.  Say Y or M if you want to be able to these serial ports.
585 	  This driver supports the 8250 serial ports that run the keyboard and
587 	  to these serial ports.
641 	  This driver supports the Siemens SAB82532 DUSCC serial ports on newer
643 	  serial ports.
665 	  This driver supports the Zilog8530 serial ports found on SGI
666 	  systems.  Say Y or M if you want to be able to these serial ports.
680 	int "Maximum number of SCI(F) serial ports" if EXPERT
713 	  to use serial ports, say Y.  Otherwise, say N.
729 	  Support for the LPC32XX high speed serial ports (up to 900kbps).
740 	  ports on the LPC32XX as the console, you can do so by answering
757 	  This serial driver supports the Freescale Coldfire serial ports.
760 	int "Default baudrate for Coldfire serial ports"
765 	  ColdFire serial ports. The usual default varies from board to board,
780 	  This driver supports the Zilog z85C30 serial ports found on
782 	  Say Y or M if you want to be able to these serial ports.
792 	  both z85C30 and 8250 type ports at the same time.
798 	  access the built-in serial ports on powermacs will need to
801 	  If you enable this option, any z85c30 ports in the system will
806 	  Say N unless you need the z85c30 ports on your (Power)Mac
823 	  This driver supports the SCC and SMC serial ports on Motorola 
847 	  If you have a PIC32, this driver supports the serial ports.
849 	  Say Y or M to use PIC32 serial ports, otherwise say N. Note that
859 	  of the serial ports.
868 	  This driver supports MPC52xx and MPC512x PSC serial ports. If you would
913 	int "Maximum number of TMPTX39XX/49XX SIO ports"
949 	  of cards which provide multiple serial ports. You would need
1001 	  can enable its onboard serial ports by enabling this option.
1071 	  This driver supports the QE serial ports on Freescale embedded
1087 	  Support for console on SCCNXP serial ports.
1097 	  This selects support for SC16IS7xx serial ports.
1198 	int "Maximum number of Altera UART ports"
1203 	  UART ports. The usual default varies from board to board, and
1207 	int "Default baudrate for Altera UART ports"
1212 	  Altera UART ports. The usual default varies from board to board,
1307 	int "Maximum number of AR933X serial ports"
1311 	  Set this to the number of serial ports you want the driver
1319 	  This driver support the USART and UART ports on
1333 	  This driver support the UART ports on ARM MPS2.
1356 	int "Number of ARC UART ports"
1361 	  Set this to the number of serial ports you want the driver
1381 	int "Maximum number of RocketPort EXPRESS/INFINITY ports"
1385 	  If multiple cards are present, the default limit of 32 ports may
1569 	int "Maximum number of CSIO/UART ports (1-8)"