5   Linux Driver for BusLogic MultiMaster and FlashPoint SCSI Host Adapters
90   all BusLogic Host Adapters.
98   all BusLogic Host Adapters.
114   to be checked for potential BusLogic Host Adapters.  It is initialized by
241   multiple host adapters share the same IRQ Channel.
517 		   Some early BusLogic Host Adapters may not recover  in blogic_cmd()
567   Host Adapters.
585   Bus Probe Information to be checked for potential BusLogic SCSI Host Adapters
657   SCSI Host Adapters by interrogating the PCI Configuration Space on PCI
659   I/O Addresses.  It returns the number of PCI MultiMaster Host Adapters found.
679 	   Iterate over the MultiMaster PCI Host Adapters.  For each  in blogic_init_mm_probeinfo()
685 	   the Primary I/O Address, then any other PCI host adapters,  in blogic_init_mm_probeinfo()
686 	   and finally any host adapters located at the remaining  in blogic_init_mm_probeinfo()
755 		   ISA Compatible I/O Port. On PCI Host Adapters, the  in blogic_init_mm_probeinfo()
822 			blogic_warn("BusLogic: Too many Host Adapters detected\n", NULL);  in blogic_init_mm_probeinfo()
828 	   MultiMaster BIOS will recognize MultiMaster Host Adapters in  in blogic_init_mm_probeinfo()
832 	   MultiMaster Host Adapters in the order they are enumerated by  in blogic_init_mm_probeinfo()
841 	   explicitly before any PCI host adapters are probed.  in blogic_init_mm_probeinfo()
878 	   Iterate over the older non-compliant MultiMaster PCI Host Adapters,  in blogic_init_mm_probeinfo()
925   Host Adapters by interrogating the PCI Configuration Space.  It returns the
926   number of FlashPoint Host Adapters found.
934 	   Interrogate PCI Configuration Space for any FlashPoint Host Adapters.  in blogic_init_fp_probeinfo()
991 			blogic_warn("BusLogic: Too many Host Adapters detected\n", NULL);  in blogic_init_fp_probeinfo()
999 	   The FlashPoint BIOS will scan for FlashPoint Host Adapters in the order of  in blogic_init_fp_probeinfo()
1010   Probe Information to be checked for potential BusLogic SCSI Host Adapters by
1013   FlashPoint and PCI MultiMaster Host Adapters are present, this driver will
1014   probe for FlashPoint Host Adapters first unless the BIOS primary disk is
1016   MultiMaster Host Adapters will be probed first.  The BusLogic Driver Options
1025 	   FlashPoint Host Adapters; otherwise, default to the standard  in blogic_init_probeinfo_list()
1062 				   Adapters are probed before FlashPoint Host  in blogic_init_probeinfo_list()
1063 				   Adapters.  in blogic_init_probeinfo_list()
1124 	   FlashPoint Host Adapters are Probed by the FlashPoint SCCB Manager.  in blogic_probe()
1163 	   an I/O port that responded.  Adaptec Host Adapters do not  in blogic_probe()
1171 	   earlier BusLogic Host Adapters, including the undocumented  in blogic_probe()
1199 	   FlashPoint Host Adapters are Hard Reset by the FlashPoint  in blogic_hwreset()
1308 	   FlashPoint Host Adapters do not require this protection.  in blogic_checkadapter()
1314 	   BusLogic Host Adapters and true clones support this command.  in blogic_checkadapter()
1315 	   Adaptec 1542C series Host Adapters that respond to the Geometry  in blogic_checkadapter()
1356 	   Configuration Information for FlashPoint Host Adapters is  in blogic_rdconfig()
1464 	   BusLogic MultiMaster Host Adapters can be identified by their  in blogic_rdconfig()
1468 	   5.xx       BusLogic "W" Series Host Adapters:  in blogic_rdconfig()
1470 	   4.xx       BusLogic "C" Series Host Adapters:  in blogic_rdconfig()
1472 	   3.xx       BusLogic "S" Series Host Adapters:  in blogic_rdconfig()
1475 	   2.xx       BusLogic "A" Series Host Adapters:  in blogic_rdconfig()
1524 	   and save the DMA Channel for ISA Host Adapters.  in blogic_rdconfig()
1580 	   Termination Information from "W" series MultiMaster Host Adapters.  in blogic_rdconfig()
1600 	   AutoSCSI data from "W" and "C" series MultiMaster Host Adapters.  in blogic_rdconfig()
1639 	   series MultiMaster Host Adapters.  in blogic_rdconfig()
1657 	   supported by this driver for Wide and Narrow Host Adapters.  in blogic_rdconfig()
1671 	   cause a substantial performance penalty.  The host adapters  in blogic_rdconfig()
1705 	   all "W" series MultiMaster Host Adapters, on "C" series  in blogic_rdconfig()
1706 	   MultiMaster Host Adapters with firmware version 4.22 and above,  in blogic_rdconfig()
1707 	   and on "S" series MultiMaster Host Adapters with firmware version  in blogic_rdconfig()
1731 	   ISA Host Adapters require Bounce Buffers if there is more than  in blogic_rdconfig()
1738 	   BusLogic BT-445S Host Adapters prior to board revision E have a  in blogic_rdconfig()
1741 	   incorrectly.  Only properly functioning BT-445S Host Adapters  in blogic_rdconfig()
1752 	   Host Adapters.  in blogic_rdconfig()
2081 	   FlashPoint Host Adapters do not use Outgoing and Incoming Mailboxes.  in blogic_initadapter()
2136 	   For Host Adapters that support Extended LUN Format CCBs, issue the  in blogic_initadapter()
2188 	   FlashPoint Host Adapters do not provide for Target Device Inquiry.  in blogic_inquiry()
2198 	   Issue the Inquire Target Devices command for host adapters with  in blogic_inquiry()
2200 	   ID 0 to 7 command for older host adapters.  This is necessary to  in blogic_inquiry()
2344   blogic_init probes for BusLogic Host Adapters at the standard
2347   returns the number of BusLogic Host Adapters successfully initialized and
2466 		   BusLogic Host Adapters.  in blogic_init()
2535 			   BusLogic Host Adapters, destroy the CCBs, Release  in blogic_init()
2566 	   FlashPoint Host Adapters must first be released by the FlashPoint  in blogic_deladapter()
2583 	   Host Adapters.  in blogic_deladapter()
2877   Adapters.
3374   may be enabled in AutoSCSI on FlashPoint Host Adapters and on "W" and "C"
3375   series MultiMaster Host Adapters, or by a dip switch setting on "S" and "A"
3376   series MultiMaster Host Adapters.  With Extended Translation enabled, drives
3649   for multiple host adapters may be specified either by separating the option
3653   adapters whereas the remaining options apply individually only to the