685 	 * This means that charging current from USB source  in ab8500_charger_max_usb_curr()
753 		dev_err(di->dev, "USB Type - Charging not allowed\n");  in ab8500_charger_max_usb_curr()
765 			dev_dbg(di->dev, "USB Type - Charging not allowed\n");  in ab8500_charger_max_usb_curr()
783 		dev_err(di->dev, "USB Type invalid - try charging anyway\n");  in ab8500_charger_max_usb_curr()
1057  * to the register. Returns -1 if charging is not allowed
1114  * charging is started. Instead we need to implement
1311  * Power ON/OFF charging LED indication
1319 		/* Power ON charging LED indicator, set LED current to 5mA */  in ab8500_charger_led_en()
1336 		/* Power off charging LED indicator */  in ab8500_charger_led_en()
1350  * ab8500_charger_ac_en() - enable or disable ac charging
1353  * @vset:	charging voltage
1354  * @iset:	charging current
1356  * Enable/Disable AC/Mains charging and turns on/off the charging led
1377 		/* Enable AC charging */  in ab8500_charger_ac_en()
1383 		 * This will turn off charging for a short while.  in ab8500_charger_ac_en()
1407 				"charging not started\n");  in ab8500_charger_ac_en()
1411 		/* ChVoltLevel: maximum battery charging voltage */  in ab8500_charger_ac_en()
1447 		/* Power on charging LED indication */  in ab8500_charger_ac_en()
1454 		/* Disable AC charging */  in ab8500_charger_ac_en()
1473 			 * We can't turn off charging completely  in ab8500_charger_ac_en()
1475 			 * If we do, charging will not start again.  in ab8500_charger_ac_en()
1519 		dev_dbg(di->dev, "%s Disabled AC charging\n", __func__);  in ab8500_charger_ac_en()
1527  * ab8500_charger_usb_en() - enable usb charging
1530  * @vset:	charging voltage
1533  * Enable/Disable USB charging and turns on/off the charging led respectively.
1556 		 * This will turn off charging for a short while.  in ab8500_charger_usb_en()
1572 		/* Enable USB charging */  in ab8500_charger_usb_en()
1581 				"charging not started\n");  in ab8500_charger_usb_en()
1609 		/* If success power on charging LED indication */  in ab8500_charger_usb_en()
1636 		/* Disable USB charging */  in ab8500_charger_usb_en()
1637 		dev_dbg(di->dev, "%s Disabled USB charging\n", __func__);  in ab8500_charger_usb_en()
1674 		dev_dbg(di->dev, "%s Disabled USB charging\n", __func__);  in ab8500_charger_usb_en()
1709  * ab8500_charger_usb_check_enable() - enable usb charging
1711  * @vset:	charging voltage
1737 		dev_info(di->dev, "Charging has been disabled abnormally and will be re-enabled\n");  in ab8500_charger_usb_check_enable()
1758  * ab8500_charger_ac_check_enable() - enable usb charging
1760  * @vset:	charging voltage
1786 		dev_info(di->dev, "Charging has been disabled abnormally and will be re-enabled\n");  in ab8500_charger_ac_check_enable()
1923  * charger when charging with at some specific levels. This issue is only valid
2267 	 * to start the charging process. but by jumping  in ab8500_charger_usb_link_status_work()
2410 		 * of 1sec for enabling charging  in ab8500_charger_usb_state_changed_work()
2416 		 * USB is configured, enable charging with the charging  in ab8500_charger_usb_state_changed_work()
2809 	 * needs to be restarted for charging to start again  in ab8500_charger_chwdexp_handler()
2877  * online:     ac/mains charging is in progress or not
2944  * online:     usb charging is in progress or not
3018  * charging of the backup battery
3128 		dev_err(di->dev, "failed to setup backup battery charging\n");  in ab8500_charger_init_hw_registers()
3132 	/* Enable backup battery charging */  in ab8500_charger_init_hw_registers()
3289 	/* Disable AC charging */  in ab8500_charger_remove()
3292 	/* Disable USB charging */  in ab8500_charger_remove()
3527 	 * interrupts during charging  in ab8500_charger_probe()