Lines Matching +full:event +full:- +full:deep
1 # Copyright (C) 2011-2014, Marvell International Ltd.
8 # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
9 # worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
11 # THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
37 Following are some useful iw commands:-
44 iw dev mlan0 connect -w <SSID> [<freq in MHz>] [<bssid>] [key 0:abcde d:1123456789a]
54 iw dev mlan0 ibss join <SSID> <freq in MHz> [fixed-freq] [fixed-bssid] [key 0:abcde]
78 mount -t debugfs debugfs /debugfs
97 bss_mode = "Ad-hoc" | "Managed" | "Auto" | "Unknown"
99 mac_address = <6-byte adapter MAC address>
127 ps_state = <0/1/2/3, full power state/awake state/pre-sleep state/sleep state>
128 is_deep_sleep = <0/1, not deep sleep state/deep sleep state>
142 last_event = <event id of the last several events received from device>
143 last_event_index = <0 based last event index>
155 mp_rd_bitmap = <SDIO multi-port read bitmap>
156 mp_wr_bitmap = <SDIO multi-port write bitmap>
158 event_received = <0/1, no event to process/event received and yet to process>
202 iwpriv mlan0 memrdwr -0x7fff6000 -0x40000000
215 <length>: 4-20, multiples of 4
229 <condition>: bit 0 = 1 -- broadcast data
230 bit 1 = 1 -- unicast data
231 bit 2 = 1 -- mac event
232 bit 3 = 1 -- multicast data
234 GPIO pin# (e.g. 0-7) or 0xff (interface, e.g. SDIO
237 wakeup event or 0xff for special setting (host
241 echo "-1" > hscfg : Cancel host sleep mode
248 to ack before sending wakeup event