693 	brcmf_dbg(TRACE, "Enter: on=%d\n", on);  in brcmf_sdio_kso_control()
755 		brcmf_dbg(SDIO, "try_cnt=%d rd_val=0x%x err=%d\n", try_cnt,  in brcmf_sdio_kso_control()
778 	brcmf_dbg(SDIO, "Enter\n");  in brcmf_sdio_htclk()
820 			brcmf_dbg(SDIO, "CLKCTL: set PENDING\n");  in brcmf_sdio_htclk()
857 		brcmf_dbg(SDIO, "CLKCTL: turned ON\n");  in brcmf_sdio_htclk()
881 		brcmf_dbg(SDIO, "CLKCTL: turned OFF\n");  in brcmf_sdio_htclk()
894 	brcmf_dbg(SDIO, "Enter\n");  in brcmf_sdio_sdclk()
911 	brcmf_dbg(SDIO, "Enter\n");  in brcmf_sdio_clkctl()
946 	brcmf_dbg(SDIO, "%d -> %d\n", oldstate, bus->clkstate);  in brcmf_sdio_clkctl()
958 	brcmf_dbg(SDIO, "Enter: request %s currently %s\n",  in brcmf_sdio_bus_sleep()
974 				brcmf_dbg(SDIO, "no clock, set ALP\n");  in brcmf_sdio_bus_sleep()
1000 	brcmf_dbg(SDIO, "new state %s\n",  in brcmf_sdio_bus_sleep()
1003 	brcmf_dbg(SDIO, "Exit: err=%d\n", err);  in brcmf_sdio_bus_sleep()
1049 	brcmf_dbg(INFO, "sdpcm_shared address 0x%08X\n", addr);  in brcmf_sdio_readshared()
1105 	brcmf_dbg(SDIO, "Enter\n");  in brcmf_sdio_hostmail()
1120 		brcmf_dbg(SDIO, "mailbox indicates firmware halted\n");  in brcmf_sdio_hostmail()
1126 		brcmf_dbg(SDIO, "Dongle reports NAK handled, expect rtx of %d\n",  in brcmf_sdio_hostmail()
1147 			brcmf_dbg(SDIO, "Dongle ready, protocol version %d\n",  in brcmf_sdio_hostmail()
1230 		brcmf_dbg(SDIO, "flush took %d iterations\n", 0xffff - retries);  in brcmf_sdio_rxfail()
1435 		brcmf_dbg(SDIO, "seq %d, expected %d\n", rx_seq, rd->seq_num);  in brcmf_sdio_hdparse()
1517 	brcmf_dbg(SDIO, "start: glomd %p glom %p\n",  in brcmf_sdio_rxglom()
1573 			brcmf_dbg(GLOM, "allocated %d-byte packet chain for %d subframes\n",  in brcmf_sdio_rxglom()
1577 				brcmf_dbg(GLOM, "glomdesc mismatch: nextlen %d glomdesc %d rxseq %d\n",  in brcmf_sdio_rxglom()
1596 			brcmf_dbg(GLOM, "try superframe read, packet chain:\n");  in brcmf_sdio_rxglom()
1598 				brcmf_dbg(GLOM, "    %p: %p len 0x%04x (%d)\n",  in brcmf_sdio_rxglom()
1751 	brcmf_dbg(SDIO, "Enter\n");  in brcmf_sdio_read_control()
1854 	brcmf_dbg(SDIO, "Enter\n");  in brcmf_sdio_readframes()
1866 			brcmf_dbg(GLOM, "calling rxglom: glomd %p, glom %p\n",  in brcmf_sdio_readframes()
1869 			brcmf_dbg(GLOM, "rxglom returned %d\n", cnt);  in brcmf_sdio_readframes()
2008 				brcmf_dbg(GLOM, "glom descriptor, %d bytes:\n",  in brcmf_sdio_readframes()
2053 		brcmf_dbg(DATA, "hit rx limit of %d frames\n", maxframes);  in brcmf_sdio_readframes()
2055 		brcmf_dbg(DATA, "processed %d frames\n", rxcount);  in brcmf_sdio_readframes()
2292 	brcmf_dbg(TRACE, "Enter\n");  in brcmf_sdio_txpkt()
2329 	brcmf_dbg(TRACE, "Enter\n");  in brcmf_sdio_sendfromq()
2392 	brcmf_dbg(SDIO, "Enter\n");  in brcmf_sdio_tx_ctrlframe()
2464 	brcmf_dbg(TRACE, "Enter\n");  in brcmf_sdio_bus_stop()
2501 		brcmf_dbg(INTR, "disable SDIO interrupts\n");  in brcmf_sdio_bus_stop()
2581 	brcmf_dbg(SDIO, "Enter\n");  in brcmf_sdio_dpc()
2599 		brcmf_dbg(SDIO, "DPC: PENDING, devctl 0x%02x clkctl 0x%02x\n",  in brcmf_sdio_dpc()
2666 		brcmf_dbg(SDIO, "Dongle reports CHIPACTIVE\n");  in brcmf_sdio_dpc()
2793 	brcmf_dbg(TRACE, "Enter: pkt: data %p len %d\n", pkt->data, pkt->len);  in brcmf_sdio_bus_txdata()
2811 	brcmf_dbg(TRACE, "deferring pktq len %d\n", pktq_len(&bus->txq));  in brcmf_sdio_bus_txdata()
2929 	brcmf_dbg(TRACE, "Enter\n");  in brcmf_sdio_bus_txctl()
2946 			brcmf_dbg(SDIO, "ctrl_frame timeout\n");  in brcmf_sdio_bus_txctl()
2953 		brcmf_dbg(SDIO, "ctrl_frame complete, err=%d\n",  in brcmf_sdio_bus_txctl()
3032 		brcmf_dbg(INFO, "no trap in firmware\n");  in brcmf_sdio_trap_info()
3081 		brcmf_dbg(INFO, "firmware not built with -assert\n");  in brcmf_sdio_assert_info()
3084 		brcmf_dbg(INFO, "no assert in dongle\n");  in brcmf_sdio_assert_info()
3119 		brcmf_dbg(INFO, "firmware not built with -assert\n");  in brcmf_sdio_checkdied()
3242 	brcmf_dbg(TRACE, "Enter\n");  in brcmf_sdio_bus_rxctl()
3260 		brcmf_dbg(CTL, "resumed on rxctl frame, got %d expected %d\n",  in brcmf_sdio_bus_rxctl()
3266 		brcmf_dbg(CTL, "cancelled\n");  in brcmf_sdio_bus_rxctl()
3269 		brcmf_dbg(CTL, "resumed for unknown reason?\n");  in brcmf_sdio_bus_rxctl()
3294 	brcmf_dbg(INFO, "Compare RAM dl & ul at 0x%08x; size=%d\n", ram_addr,  in brcmf_sdio_verifymemory()
3340 	brcmf_dbg(TRACE, "Enter\n");  in brcmf_sdio_download_code_file()
3360 	brcmf_dbg(TRACE, "Enter\n");  in brcmf_sdio_download_nvram()
3384 	brcmf_dbg(SDIO, "firmware rstvec: %x\n", rstvec);  in brcmf_sdio_download_firmware()
3429 	brcmf_dbg(TRACE, "Enter\n");  in brcmf_sdio_sr_init()
3476 	brcmf_dbg(INFO, "SR enabled\n");  in brcmf_sdio_sr_init()
3486 	brcmf_dbg(TRACE, "Enter\n");  in brcmf_sdio_kso_init()
3595 	brcmf_dbg(INFO, "dump at 0x%08x: size=%zu\n", bus->ci->rambase,  in brcmf_sdio_bus_get_memdump()
3630 	brcmf_dbg(TRACE, "Enter\n");  in brcmf_sdio_isr()
3656 	brcmf_dbg(TIMER, "Enter\n");  in brcmf_sdio_bus_watchdog()
3720 				brcmf_dbg(SDIO, "idle\n");  in brcmf_sdio_bus_watchdog()
3802 		brcmf_dbg(INFO, "No SDIO driver strength init needed for chip %s rev %d pmurev %d\n",  in brcmf_sdio_drivestrengthinit()
3824 		brcmf_dbg(INFO, "SDIO: %d mA (req=%d mA) drive strength selected, set to 0x%08x\n",  in brcmf_sdio_drivestrengthinit()
4142 	brcmf_dbg(SDIO, "Enter\n");  in brcmf_sdio_bus_reset()
4197 	brcmf_dbg(TRACE, "Enter: dev=%s, err=%d\n", dev_name(dev), err);  in brcmf_sdio_firmware_callback()
4245 	brcmf_dbg(INFO, "enable F2: err=%d\n", err);  in brcmf_sdio_firmware_callback()
4256 			brcmf_dbg(INFO, "set F2 watermark to 0x%x*4 bytes\n",  in brcmf_sdio_firmware_callback()
4269 			brcmf_dbg(INFO, "set F2 watermark to 0x%x*4 bytes\n",  in brcmf_sdio_firmware_callback()
4283 			brcmf_dbg(INFO, "set F2 watermark to 0x%x*4 bytes\n",  in brcmf_sdio_firmware_callback()
4296 			brcmf_dbg(INFO, "set F2 watermark to 0x%x*4 bytes\n",  in brcmf_sdio_firmware_callback()
4311 			brcmf_dbg(INFO, "set F2 watermark to 0x%x*4 bytes\n",  in brcmf_sdio_firmware_callback()
4390 	brcmf_dbg(TRACE, "failed: dev=%s, err=%d\n", dev_name(dev), err);  in brcmf_sdio_firmware_callback()
4425 	brcmf_dbg(TRACE, "Enter\n");  in brcmf_sdio_probe()
4504 	brcmf_dbg(INFO, "completed!!\n");  in brcmf_sdio_probe()
4530 	brcmf_dbg(TRACE, "Enter\n");  in brcmf_sdio_remove()
4573 	brcmf_dbg(TRACE, "Disconnected\n");  in brcmf_sdio_remove()