Lines Matching +full:auto +full:- +full:baud
1 /* SPDX-License-Identifier: GPL-2.0 */
19 #define BPS_TO_BRG(bps, freq) ((((freq) + (bps)) / (2 * (bps))) - 2)
82 #define AUTO_ENAB 0x20 /* Auto Enables */
112 #define SDLC_CRC 0x4 /* SDLC/CRC-16 */
121 /* Write Register 6 (Sync bits 0-7/SDLC Address Field) */
123 /* Write Register 7 (Sync bits 8-15/SDLC 01111110) */
166 /* Write Register 12 (lower byte of baud rate generator time constant) */
168 /* Write Register 13 (upper byte of baud rate generator time constant) */
171 #define BRENABL 1 /* Baud rate generator enable */
172 #define BRSRC 2 /* Baud rate generator source */
174 #define AUTOECHO 8 /* Auto Echo */
222 /* Read Register 2 (channel b only) - Interrupt vector */
240 /* Read Register 12 (lower byte of baud rate generator constant) */
242 /* Read Register 13 (upper byte of baud rate generator constant) */
320 u32 rx_overrun; /* Overruns - not done yet */
362 int baud_base; /* Baud parameters */
383 #define Z85C30 1 /* CMOS - better */
386 int active; /* Soft interrupt enable - the Mac doesn't
432 * Events are used to schedule things to happen at timer-interrupt