Lines Matching +full:10 +full:a
19 Say Y if you want to use one of the following 10Mbps USB Ethernet
27 This driver makes the adapter appear as a normal Ethernet interface,
29 eth1, if you have a PCI or ISA ethernet card installed.
31 To compile this driver as a module, choose M here: the
37 Say Y here if you want to use one of the following 10Mbps only
40 ADS USB-10BT
59 This driver is likely to work with most 10Mbps only USB Ethernet
66 This driver makes the adapter appear as a normal Ethernet interface,
68 eth1, if you have a PCI or ISA ethernet card installed.
70 To compile this driver as a module, choose M here: the
85 To compile this driver as a module, choose M here: the
96 To compile this driver as a module, choose M here: the
104 10/100 Ethernet adapters and RTL8153 based USB 3.0 10/100/1000
107 To compile this driver as a module, choose M here: the
118 & USB 3 10/100/1000 Ethernet adapters.
119 LAN7800 : USB 3 to 10/100/1000 Ethernet adapter
120 LAN7850 : USB 2 to 10/100/1000 Ethernet adapter
121 LAN7801 : USB 3 to 10/100/1000 Ethernet adapter (MAC only)
125 To compile this driver as a module, choose M here: the
133 with "minidrivers" built around a common network driver core
144 - An intelligent USB gadget, perhaps embedding a Linux system.
149 - Network adapter hardware (like those for 10/100 Ethernet) which
152 The link will appear with a name like "usb0", when the link is
153 a two-node link, or "eth0" for most CDC-Ethernet devices. Those
159 To compile this driver as a module, choose M here: the
170 10/100 Ethernet adapters.
193 tristate "ASIX AX88179/178A USB 3.0/2.0 to Gigabit Ethernet"
216 Class (CDC) Ethernet Control Model, a specification that's easy to
235 IEEE 802 "local assignment" bit is set in the address, a "usbX"
243 Class (CDC) Ethernet Emulation Model, a specification that's easy to
249 IEEE 802 "local assignment" bit is set in the address, a "usbX"
262 Say "y" to link the driver statically, or "m" to build a
278 This driver supports huawei-style NCM devices, that use NCM as a
284 To compile this driver as a module, choose M here: the module will be
302 To compile this driver as a module, choose M here: the
306 tristate "Davicom DM96xx based USB 10/100 ethernet devices"
311 based USB 10/100 Ethernet adapters.
314 tristate "CoreChip-sz SR9700 based USB 1.1 10/100 ethernet devices"
319 10/100 Ethernet adapters.
322 tristate "CoreChip-sz SR9800 based USB 2.0 10/100 ethernet devices"
329 This driver makes the adapter appear as a normal Ethernet interface,
331 eth1, if you have a PCI or ISA ethernet card installed.
333 To compile this driver as a module, choose M here: the
347 tristate "SMSC LAN95XX based USB 2.0 10/100 ethernet devices"
356 10/100 Ethernet adapters.
359 tristate "GeneSys GL620USB-A based cables"
362 Choose this option if you're using a host-to-host cable,
372 Choose this option if you're using a host-to-host cable based
382 Choose this option if you're using a host-to-host cable
389 Choose this option if you're using a 10/100 Ethernet USB2
400 various devices that may only support this protocol. A variant
432 Choose this option if you're using a host-to-host cable
440 Choose this option if you're using a host-to-host cable
441 based on this design. Note that AnchorChips is now a
450 Choose this option if you're using a host-to-host cable
468 Although the ROMs shipped with Sharp Zaurus products use a
470 this simpler protocol by installing a different kernel.
485 Choose this option if you're using a host-to-host cable
496 Zaurus models like the SL-5000D, SL-5500, SL-5600, A-300, B-500.
510 Choose this option if you're using a Conexant CX82310-based ADSL
518 Choose this option if you have a Samsung Kalmia based USB modem
521 To compile this driver as a module, choose M here: the
541 A modem manager with support for QMI is recommended.
543 To compile this driver as a module, choose M here: the
554 To compile this driver as a module, choose M here: the
561 Choose this option if you're using a 14Mb USB-based PLC
569 Choose this option to support the Phonet interface to a Nokia
589 Choose this option if you have a Sierra Wireless USB-to-WWAN device.
591 To compile this driver as a module, choose M here: the
601 interface exposed by the modem firmware. To establish a connection
602 you will first need a userspace program that sends the right
604 likely also a DHCP client. See this thread about using the
614 Choose this option if you have a USB ethernet adapter with a QinHeng
617 To compile this driver as a module, choose M here: the