15  *  ser12:  This is a very simple 1200 baud AFSK modem. The modem consists only
27  *  hsk:    This is a 4800 baud FSK modem, designed for TNC use. It works fine
37  *           '#' denotes the baud rate / 100, eg. ser12* is '1200 baud, soft DCD'
39  *  baud     baud rate (between 300 and 4800)
115 	unsigned int baud, baud_us, baud_arbdiv, baud_uartdiv, baud_dcdtimeout;  member
388 	if (bc->baud < 300 || bc->baud > 4800) {  in ser12_open()
399 	bc->hdrv.par.bitrate = bc->baud;  in ser12_open()
400 	bc->baud_us = 1000000/bc->baud;  in ser12_open()
401 	bc->baud_uartdiv = (115200/8)/bc->baud;  in ser12_open()
416 	 * the baud rate is set to produce 100 ints/sec  in ser12_open()
418 	 * during transmit to baud ints/sec to run  in ser12_open()
433 	printk(KERN_INFO "%s: ser_fdx at iobase 0x%lx irq %u baud %u uart %s\n",  in ser12_open()
434 	       bc_drvname, dev->base_addr, dev->irq, bc->baud, uart_str[u]);  in ser12_open()
482 	unsigned int baud;  in baycom_setmode()  local
485 		baud = simple_strtoul(modestr+3, NULL, 10);  in baycom_setmode()
486 		if (baud >= 3 && baud <= 48)  in baycom_setmode()
487 			bc->baud = baud*100;  in baycom_setmode()
519 		sprintf(hi->data.modename, "ser%u", bc->baud / 100);  in baycom_ioctl()
572 static int baud[NR_PORTS] = { [0 ... NR_PORTS-1] = 1200 };  variable
580 module_param_array(baud, int, NULL, 0);
581 MODULE_PARM_DESC(baud, "baycom baud rate (300 to 4800)");
619 		bc->baud = baud[i];  in init_baycomserfdx()
652  * '#' denotes the baud rate / 100, eg. ser12* is '1200 baud, soft DCD'
669 		baud[nr_dev] = ints[3];  in baycom_ser_fdx_setup()