662 		SMSC_TRACE(pdata, hw, "Forcing internal PHY");  in smsc911x_phy_initialise_external()
665 		SMSC_TRACE(pdata, hw, "Forcing external PHY");  in smsc911x_phy_initialise_external()
669 		SMSC_TRACE(pdata, hw,  in smsc911x_phy_initialise_external()
674 		SMSC_TRACE(pdata, hw,  in smsc911x_phy_initialise_external()
798 				SMSC_TRACE(pdata, hw, "Successfully verified "  in smsc911x_phy_check_loopbackpkt()
929 		SMSC_TRACE(pdata, hw, "rx pause %s, tx pause %s",  in smsc911x_phy_update_flowcontrol()
933 		SMSC_TRACE(pdata, hw, "half duplex");  in smsc911x_phy_update_flowcontrol()
956 		SMSC_TRACE(pdata, hw, "duplex state has changed");  in smsc911x_phy_adjust_link()
961 			SMSC_TRACE(pdata, hw,  in smsc911x_phy_adjust_link()
965 			SMSC_TRACE(pdata, hw,  in smsc911x_phy_adjust_link()
978 		SMSC_TRACE(pdata, hw, "carrier state has changed");  in smsc911x_phy_adjust_link()
980 			SMSC_TRACE(pdata, hw, "configuring for carrier OK");  in smsc911x_phy_adjust_link()
989 			SMSC_TRACE(pdata, hw, "configuring for no carrier");  in smsc911x_phy_adjust_link()
1025 	SMSC_TRACE(pdata, probe, "PHY: addr %d, phy_id 0x%08X",  in smsc911x_mii_probe()
1052 	SMSC_TRACE(pdata, hw, "Passed Loop Back Test");  in smsc911x_mii_probe()
1055 	SMSC_TRACE(pdata, hw, "phy initialised successfully");  in smsc911x_mii_probe()
1089 		SMSC_TRACE(pdata, hw, "External PHY is not supported, "  in smsc911x_mii_init()
1299 	SMSC_TRACE(pdata, hw, "maccr 0x%08X, HASHH 0x%08X, HASHL 0x%08X",  in smsc911x_rx_multicast_update()
1544 		SMSC_TRACE(pdata, intr, "RX Stop interrupt");  in smsc911x_irqhandler()
1561 		SMSC_TRACE(pdata, intr, "RX Error interrupt");  in smsc911x_irqhandler()
1642 		SMSC_TRACE(pdata, ifup, "irq polarity: active high");  in smsc911x_open()
1645 		SMSC_TRACE(pdata, ifup, "irq polarity: active low");  in smsc911x_open()
1649 		SMSC_TRACE(pdata, ifup, "irq type: push-pull");  in smsc911x_open()
1652 		SMSC_TRACE(pdata, ifup, "irq type: open drain");  in smsc911x_open()
1657 	SMSC_TRACE(pdata, ifup, "Testing irq handler using IRQ %d", dev->irq);  in smsc911x_open()
1687 	SMSC_TRACE(pdata, ifup, "IRQ handler passed test using IRQ %d",  in smsc911x_open()
1770 	SMSC_TRACE(pdata, ifdown, "Interface stopped");  in smsc911x_stop()
1891 			SMSC_TRACE(pdata, hw, "scheduling mcast update");  in smsc911x_set_multicast_list()
2011 	SMSC_TRACE(pdata, drv, "op 0x%08x", op);  in smsc911x_eeprom_send_cmd()
2026 		SMSC_TRACE(pdata, drv, "TIMED OUT");  in smsc911x_eeprom_send_cmd()
2031 		SMSC_TRACE(pdata, drv, "Error occurred during eeprom operation");  in smsc911x_eeprom_send_cmd()
2044 	SMSC_TRACE(pdata, drv, "address 0x%x", address);  in smsc911x_eeprom_read_location()
2059 	SMSC_TRACE(pdata, drv, "address 0x%x, data 0x%x", address, data);  in smsc911x_eeprom_write_location()
2173 	SMSC_TRACE(pdata, probe, "Driver Parameters:");  in smsc911x_init()
2174 	SMSC_TRACE(pdata, probe, "LAN base: 0x%08lX",  in smsc911x_init()
2176 	SMSC_TRACE(pdata, probe, "IRQ: %d", dev->irq);  in smsc911x_init()
2177 	SMSC_TRACE(pdata, probe, "PHY will be autodetected.");  in smsc911x_init()
2213 	SMSC_TRACE(pdata, probe, "BYTE_TEST: 0x%08X", byte_test);  in smsc911x_init()
2215 		SMSC_TRACE(pdata, probe, "BYTE_TEST looks swapped, "  in smsc911x_init()
2231 			SMSC_TRACE(pdata, probe,  in smsc911x_init()
2275 	SMSC_TRACE(pdata, probe,  in smsc911x_init()
2316 	SMSC_TRACE(pdata, ifdown, "Stopping driver");  in smsc911x_drv_remove()
2509 		SMSC_TRACE(pdata, probe,  in smsc911x_drv_probe()
2518 		SMSC_TRACE(pdata, probe,  in smsc911x_drv_probe()
2522 		SMSC_TRACE(pdata, probe,  in smsc911x_drv_probe()
2531 			SMSC_TRACE(pdata, probe,  in smsc911x_drv_probe()
2537 			SMSC_TRACE(pdata, probe,  in smsc911x_drv_probe()